Welcome to Quotebeam
Nikki Gonzales
Bryan Obida
Nick Goetz

Live support:

Monday - Friday 6AM - 6PM PST

2909521 Phoenix Contact Relays

Phoenix Contact 2909521 PLC-INTERFACE, consisting of DIN-rail-mountable basic terminal block in 14 mm with screw connection and plug-in relay with 10 A power contact, 1 changeover contact, 230 V AC/220 V DC input voltage. Approved according to ATEX/IECEx (Zone 2) and Ex Zone Cla
Phoenix Contact

Part#:2909521

Manufacturer:Phoenix Contact

Product Lifecycle:Active

Checking verified in-stock parts...

About the product: PLC-INTERFACE, consisting of DIN-rail-mountable basic terminal block in 14 mm with screw connection and plug-in relay with 10 A power contact, 1 changeover contact, 230 V AC/220 V DC input voltage. Approved according to ATEX/IECEx (Zone 2) and Ex Zone Cla

About the manufacturer: Phoenix Contact develops and manufactures industrial electrical and electronic technology products that power, protect, connect and automate systems and equipment.

Check out the 2909521 Phoenix Contact price in the box on the right side or send a quick quote.

2909521 Product Details

  • Height
    80 mm
  • Typical response time
    7 ms
  • Operating voltage display
    Yellow LED
  • Ambient temperature (operation)
    -20 °C ... 60 °C (UL)
  • Typical release time
    10 ms
  • Contact type
    1 changeover contact
  • Maximum inrush current
    30 A (300 ms)
  • Switching capacity
    2 A (at 24 V, DC13)
  • Test voltage
    4 kV AC (50 Hz, 1 min., winding/contact)
  • Connection name
    Contact side
  • Conductor cross section flexible
    0.14 mm² ... 2.5 mm²
  • Standards/regulations
    IEC 60664
  • Rated surge voltage
    6 kV
  • REACh SVHC
    Lead 7439-92-1
  • ECLASS 5.0
    27371600
  • ETIM 2.0
    EC001437
  • UNSPSC 6.01
    30211916
  • UNSPSC 12.01
    39121515
  • UNSPSC 19.0
    39122334
  • Width
    14 mm
  • Ambient temperature (storage/transport)
    -40 °C ... 85 °C
  • Nominal input voltage UN
    230 V AC
  • Protective circuit
    Bridge rectifier Bridge rectifier
  • Type of switch contact
    Single contact
  • Min. switching current
    10 mA (at 12 V)
  • Flammability rating according to UL 94
    V0 (Housing)
  • Assembly instructions
    In rows with zero spacing
  • Screw thread
    M3
  • Conductor cross section AWG
    26 ... 14
  • Pollution degree
    2
  • Certificate
    IECEx IBE 16.0029X
  • ECLASS 11.0
    27371601
  • ECLASS 7.0
    27371601
  • ECLASS 9.0
    27371601
  • UNSPSC 13.2
    39122334
  • UNSPSC 20.0
    39122334
  • Depth
    94 mm
  • Degree of protection
    RT III (Relay)
  • Power dissipation for nominal condition
    1.04 W
  • Minimum switching voltage
    12 V (at 10 mA)
  • Interrupting rating (ohmic load) max.
    240 W (at 24 V DC)
  • Operating mode
    100% operating factor
  • Mechanical service life
    3x 107 cycles
  • Stripping length
    8 mm
  • Connection method
    Screw connection
  • Rated insulation voltage
    250 V AC
  • Insulation
    Safe isolation, reinforced insulation
  • Identification
    ISA-S71.04. G3 Harsh Group
  • China RoHS
    Environmentally Friendly Use Period = 50 years
  • ECLASS 5.1
    27371600
  • ETIM 6.0
    EC001437
  • UNSPSC 11
    39121515
  • UNSPSC 7.0901
    39121515
  • Utilization restriction
    EMC: class A product, see manufacturer's declaration in the download area
  • Typical input current at UN
    4.5 mA
  • Contact material
    AgNi
  • Maximum switching voltage
    250 V AC/DC (The separating plate PLC-ATP should be installed for voltages larger than 250 V (L1, L2, L3) between identical terminal blocks in adjacent modules. Potential bridging is then carried out with FBST 8-PLC... or ...FBST 500...)
  • Limiting continuous current
    10 A
  • Interrupting rating (ohmic load) max. bridged
    144 W (for 24 V DC. Value applies to connections 12. If connections 12 are bridged, the normal value applies.)
  • Mounting position
    any
  • Conductor cross section solid
    0.14 mm² ... 2.5 mm²
  • Designation
    Corrosive gas test
  • Overvoltage category
    III
  • ECLASS 10.0.1
    27371601
  • ECLASS 6.0
    27371600
  • ETIM 3.0
    EC001437
  • ETIM 4.0
    EC001437
  • ETIM 7.0
    EC001437
  • UNSPSC 18.0
    39122334
  • UNSPSC 21.0
    39122334

Product condition

New Factory Sealed

New Factory Sealed - New condition, never used surplus in original packaging with original factory seal.

Shipping and Delivery Worldwide

calculate cost and time at Checkout


Secure Payment Processing

with money back guarantee


1 year warranty

on all parts


Responsive Customer Support

we're here to help!

Need more details?

Feel free to chat with us or check our FAQ

Relevant products

Do you have questions?

We’re here for you ✨

We are a proud member of:

Association for High Technology Distribution LogoAssociation for Advancing Automation LogoThe International Society of Automation Logo