Welcome to Quotebeam
Nikki Gonzales
Bryan Obida
Nick Goetz

We are online

Monday - Friday 6AM - 6PM PST

2909518 Phoenix Contact Relays

Phoenix Contact 2909518 PLC-INTERFACE, consisting of DIN-rail-mountable basic terminal block in 14 mm with screw connection and plug-in relay with 10 A power contact, 1 changeover contact, 12 V DC input voltage. Approved according to ATEX/IECEx (Zone 2) and Ex Zone Class I, Div.
Phoenix Contact

Part#:2909518

Manufacturer:Phoenix Contact

Product Lifecycle:Active

Checking verified in-stock parts...

About the product: PLC-INTERFACE, consisting of DIN-rail-mountable basic terminal block in 14 mm with screw connection and plug-in relay with 10 A power contact, 1 changeover contact, 12 V DC input voltage. Approved according to ATEX/IECEx (Zone 2) and Ex Zone Class I, Div.

About the manufacturer: Phoenix Contact develops and manufactures industrial electrical and electronic technology products that power, protect, connect and automate systems and equipment.

Check out the 2909518 Phoenix Contact price in the box on the right side or send a quick quote.

2909518 Product Details

  • Depth
    94 mm
  • Typical input current at UN
    33 mA
  • Height
    80 mm
  • Degree of protection
    RT III (Relay)
  • Protective circuit
    Reverse polarity protection Polarity protection diode
  • Contact type
    1 changeover contact
  • Minimum switching voltage
    12 V AC/DC
  • Maximum inrush current
    30 A (300 ms)
  • Test voltage
    4 kV AC (50 Hz, 1 min., winding/contact)
  • Connection method
    Screw connection
  • Designation
    Corrosive gas test
  • Rated surge voltage
    6 kV
  • Ambient temperature (operation)
    -20 °C ... 60 °C (UL)
  • Typical release time
    10 ms
  • Operating voltage display
    Yellow LED
  • Min. switching current
    10 mA (at 12 V)
  • Interrupting rating (ohmic load) max.
    240 W (at 24 V DC)
  • Operating mode
    100% operating factor
  • Mounting position
    any
  • Stripping length
    8 mm
  • Screw thread
    M3
  • Conductor cross section AWG
    26 ... 14
  • Overvoltage category
    III
  • Certificate
    IECEx IBE 16.0029X
  • ECLASS 11.0
    27371601
  • ECLASS 5.0
    27371600
  • ETIM 2.0
    EC001437
  • ETIM 6.0
    EC001437
  • UNSPSC 6.01
    30211916
  • UNSPSC 11
    39121515
  • UNSPSC 20.0
    39122334
  • UNSPSC 19.0
    39122334
  • Width
    14 mm
  • Nominal input voltage UN
    12 V DC
  • Utilization restriction
    EMC: class A product, see manufacturer's declaration in the download area
  • Ambient temperature (storage/transport)
    -40 °C ... 85 °C
  • Typical response time
    8 ms
  • Type of switch contact
    Single contact
  • Maximum switching voltage
    250 V AC/DC (The separating plate PLC-ATP should be installed for voltages larger than 250 V (L1, L2, L3) between identical terminal blocks in adjacent modules. Potential bridging is then carried out with FBST 8-PLC... or ...FBST 500...)
  • Interrupting rating (ohmic load) max. bridged
    144 W (for 24 V DC. Value applies to connections 12. If connections 12 are bridged, the normal value applies.)
  • Flammability rating according to UL 94
    V0 (Housing)
  • Assembly instructions
    In rows with zero spacing
  • Conductor cross section solid
    0.14 mm² ... 2.5 mm²
  • Standards/regulations
    IEC 60664
  • Identification
    ISA-S71.04. G3 Harsh Group
  • REACh SVHC
    Lead 7439-92-1
  • ECLASS 6.0
    27371600
  • ECLASS 10.0.1
    27371601
  • ETIM 3.0
    EC001437
  • ETIM 4.0
    EC001437
  • UNSPSC 7.0901
    39121515
  • UNSPSC 18.0
    39122334
  • Power dissipation for nominal condition
    0.4 W
  • Contact material
    AgNi
  • Limiting continuous current
    10 A
  • Switching capacity
    2 A (at 24 V, DC13)
  • Mechanical service life
    3x 107 cycles
  • Connection name
    Contact side
  • Conductor cross section flexible
    0.14 mm² ... 2.5 mm²
  • Rated insulation voltage
    250 V AC
  • Pollution degree
    2
  • Insulation
    Safe isolation, reinforced insulation
  • China RoHS
    Environmentally Friendly Use Period = 50 years
  • ECLASS 5.1
    27371600
  • ECLASS 9.0
    27371601
  • ECLASS 7.0
    27371601
  • ETIM 7.0
    EC001437
  • UNSPSC 12.01
    39121515
  • UNSPSC 21.0
    39122334
  • UNSPSC 13.2
    39122334

Product condition

New Factory Sealed

New Factory Sealed - New condition, never used surplus in original packaging with original factory seal.

Shipping and Delivery Worldwide

calculate cost and time at Checkout


Secure Payment Processing

with money back guarantee


1 year warranty

on all parts


Responsive Customer Support

we're here to help!

Need more details?

Feel free to chat with us or check our FAQ

Relevant products

Do you have questions?

We’re here for you ✨

We are a proud member of:

Association for High Technology Distribution LogoAssociation for Advancing Automation LogoThe International Society of Automation Logo