Welcome to Quotebeam
Nikki Gonzales
Bryan Obida
Nick Goetz

We are online

Monday - Friday 6AM - 6PM PST

2909514 Phoenix Contact Relays

Phoenix Contact 2909514 PLC-INTERFACE, consisting of DIN-rail-mountable basic terminal block in 14 mm with Push-in connection and plug-in relay with power contact, 2 changeover contacts, 24 V DC input voltage. Approved according to ATEX/IECEx (Zone 2) and Ex Zone Class I, Div. 2
Phoenix Contact

Part#:2909514

Manufacturer:Phoenix Contact

Product Lifecycle:Active

Checking verified in-stock parts...

About the product: PLC-INTERFACE, consisting of DIN-rail-mountable basic terminal block in 14 mm with Push-in connection and plug-in relay with power contact, 2 changeover contacts, 24 V DC input voltage. Approved according to ATEX/IECEx (Zone 2) and Ex Zone Class I, Div. 2

About the manufacturer: Phoenix Contact develops and manufactures industrial electrical and electronic technology products that power, protect, connect and automate systems and equipment.

Check out the 2909514 Phoenix Contact price in the box on the right side or send a quick quote.

2909514 Product Details

  • Depth
    94 mm
  • Nominal input voltage UN
    24 V DC
  • Typical release time
    10 ms
  • Operating voltage display
    Yellow LED
  • Maximum inrush current
    15 A (300 ms)
  • Interrupting rating (ohmic load) max.
    140 W (at 24 V DC)
  • Mechanical service life
    3x 107 cycles
  • Connection name
    Contact side
  • Conductor cross section AWG
    26 ... 14
  • Rated insulation voltage
    250 V AC
  • Pollution degree
    2
  • Width
    14 mm
  • Ambient temperature (storage/transport)
    -40 °C ... 85 °C
  • Type of switch contact
    Single contact
  • Contact material
    AgNi
  • Min. switching current
    10 mA (At 5 V)
  • Flammability rating according to UL 94
    V0 (Housing)
  • Assembly instructions
    In rows with zero spacing
  • Conductor cross section flexible
    0.14 mm² ... 2.5 mm²
  • Rated surge voltage
    6 kV
  • Insulation
    Safe isolation, reinforced insulation
  • ATEX
     II 3G Ex ec nC IIC T4 Gc
  • Identification
    ISA-S71.04. G3 Harsh Group
  • ECLASS 10.0.1
    27371601
  • ECLASS 7.0
    27371601
  • ECLASS 9.0
    27371601
  • ETIM 6.0
    EC001437
  • UNSPSC 12.01
    39121515
  • UNSPSC 20.0
    39122334
  • Height
    80 mm
  • Typical input current at UN
    18 mA
  • Protective circuit
    Reverse polarity protection Polarity protection diode
  • Contact type
    2 changeover contacts
  • Minimum switching voltage
    5 V AC/DC (at 10 mA)
  • Limiting continuous current
    6 A
  • Test voltage
    4 kV AC (50 Hz, 1 min., winding/contact)
  • Mounting position
    any
  • Connection method
    Push-in connection
  • Standards/regulations
    IEC 60664
  • Conformance
    CE-compliant
  • UL, USA
    Class I, Zone 2, AEx nA nC IIC T6
  • UL, USA/Canada
    Class I, Div. 2, Groups A, B, C, D
  • ECLASS 5.1
    27371600
  • ETIM 2.0
    EC001437
  • UNSPSC 7.0901
    39121515
  • UNSPSC 13.2
    39122334
  • Utilization restriction
    EMC: class A product, see manufacturer's declaration in the download area
  • Ambient temperature (operation)
    -20 °C ... 60 °C (UL)
  • Degree of protection
    RT III (Relay)
  • Typical response time
    8 ms
  • Power dissipation for nominal condition
    0.43 W
  • Maximum switching voltage
    250 V AC/DC (The separating plate PLC-ATP should be installed for voltages larger than 250 V (L1, L2, L3) between identical terminal blocks in adjacent modules. Potential bridging is then carried out with FBST 8-PLC... or ...FBST 500...)
  • Switching capacity
    2 A (at 24 V, DC13)
  • Operating mode
    100% operating factor
  • Stripping length
    8 mm
  • Conductor cross section solid
    0.14 mm² ... 2.5 mm²
  • Designation
    Corrosive gas test
  • Overvoltage category
    III
  • UL, Canada
    Class I, Zone 2, Ex nA nC IIC Gc T6 X
  • Certificate
    IECEx IBE 16.0029X
  • ECLASS 11.0
    27371601
  • ECLASS 6.0
    27371600
  • ETIM 4.0
    EC001437
  • UNSPSC 6.01
    30211916
  • IECEx
    Ex ec nC IIC T4 Gc
  • REACh SVHC
    Lead 7439-92-1
  • China RoHS
    Environmentally Friendly Use Period = 50 years
  • ECLASS 5.0
    27371600
  • ETIM 3.0
    EC001437
  • ETIM 7.0
    EC001437
  • UNSPSC 11
    39121515
  • UNSPSC 21.0
    39122334
  • UNSPSC 19.0
    39122334
  • UNSPSC 18.0
    39122334

Product condition

New Factory Sealed

New Factory Sealed - New condition, never used surplus in original packaging with original factory seal.

Shipping and Delivery Worldwide

calculate cost and time at Checkout


Secure Payment Processing

with money back guarantee


1 year warranty

on all parts


Responsive Customer Support

we're here to help!

Need more details?

Feel free to chat with us or check our FAQ

Relevant products

Do you have questions?

We’re here for you ✨

We are a proud member of:

Association for High Technology Distribution LogoAssociation for Advancing Automation LogoThe International Society of Automation Logo