2908671 Phoenix Contact Data & Networking Devices

2908671 Product Details

• Width
  22.5 mm
• Conductor cross section AWG
  24 ... 14
• Additional text
  Safe shutdown
• ECLASS 11.0
  27370905
• ECLASS 6.0
  27024000
• UNSPSC 12.01
  39121514
• UNSPSC 20.0
  25173902
• Indication
  Red LED
• Designation
  Category (ISO 13849)
• Insulation
  Safe isolation (IEC 60947-1) in the auxiliary circuit ≤ 300 V AC
• ECLASS 5.1
  27024000
• ETIM 4.0
  EC001037
• Group installation
  20 A (class RK5, SCCR 5kA (480 V AC), #24 - 14 AWG max. solid and stranded)
• FLA
  3 A (480 V AC)
• ECLASS 4.0
  27021100
• ECLASS 7.0
  27024002
• ETIM 6.0
  EC001037
• UNSPSC 18.0
  25173902
• Connection name
  Load circuit
• Overvoltage category
  III
Stripping length
10 mm
Identification
≤ 3
China RoHS
Environmentally Friendly Use Period = 50 years
REACh SVHC
Lead 7439-92-1
ECLASS 9.0
27370905
ETIM 3.0
EC001037
UNSPSC 7.0901
39121514
UNSPSC 19.0
25173902
Status display
Yellow LED
Rated surge voltage
6 kV
Degree of pollution
2
Certificate
NLDX.E228652
SCCR
100 kA (480 V AC (fuse: 30 A class CC/30 A class J (high fault)))
Horsepower ratings
0.5 hp (208 V AC)
ECLASS 10.0.1
27370905
ECLASS 5.0
27024000
UNSPSC 11
39121514
UNSPSC 21.0
25173902
Depth
114 mm
Connection method
Push-in connection
Rated insulation voltage
550 V
Standards/regulations
IEC 60947-1
Category code
NLDX / NRNT
ECLASS 4.1
27021100
ETIM 2.0
EC001037
ETIM 7.0
EC001037
UNSPSC 6.01
30211915
UNSPSC 13.2
25173902
Conductor cross section flexible
0.2 mm² ... 2.5 mm²
Conductor cross section solid
0.2 mm² ... 2.5 mm²
Rated control circuit supply voltage US
24 V DC
Switching threshold
9.6 V (“0” signal)
Operating voltage range
42 V AC ... 550 V AC
Operate threshold
> 33 A
Motor starter type
Direct starter
Maximum power dissipation
4.1 W
Operating voltage display
Green LED
Ambient temperature (storage/transport)
-40 °C ... 80 °C
Rated control supply current IS
65 mA
Triggering voltage range
19.2 V DC ... 30 V DC
Output name
AC output
Trigger characteristic in acc. with IEC 60947-4-2
Class 10
Switching frequency
≤ 2 Hz (Load-dependent)
Minimum power dissipation
0.88 W
Ambient temperature (operation)
-5 °C ... 55 °C (observe derating)
Input name
Enable input
Typical turn-off time
< 30 ms
Mains frequency
50/60 Hz
Leakage current
0 mA
Mounting position
vertical (horizontal DIN rail, motor output below)
Assembly instructions
alignable, for spacing see derating
Type of note
Notes on operation
Height
127 mm
Degree of protection
IP20
Type of protection
Surge protection
Rated actuating current IC
7 mA
Rated operating current Ie
3 A (AC-51)
Cooling time
20 min. (for auto reset)
Mounting type
DIN rail mounting
Note
If this device is to be used in combination with the CrossPowerSystem power distribution board, the device mount for the 16 A fuse (order designation: EM-CPS-DA-22,5F/16A; order number: 1002668) is required in order to attach the hybrid motor starter to t
Rated operating voltage Ue
500 V AC
Load current range
180 mA ... 3 A (see to derating)
Response time
< 0.5 s
Operating mode
100% operating factor
Control supply voltage range
19.2 V DC ... 30 V DC
Rated actuating voltage UC
24 V DC
Switching level
< 5 V DC (For EMERGENCY STOP)
Maximum altitude
≤ 2000 m

Product condition