2908669 Phoenix Contact Data & Networking Devices

2908669 Product Details

• Cooling time
  20 min. (for auto reset)
• Switching frequency
  ≤ 2 Hz (Load-dependent)
• Mounting position
  vertical (horizontal DIN rail, motor output below)
• Indication
  Red LED
• UNSPSC 21.0
  25173902
• Switching threshold
  9.6 V (“0” signal)
• Rated operating current Ie
  3 A (AC-51)
• Height
  127 mm
• Control supply voltage range
  19.2 V DC ... 30 V DC
• Input name
  Enable input
• Typical turn-off time
  < 30 ms
• Mains frequency
  50/60 Hz
• Motor starter type
  Reversing starter
• Assembly instructions
  alignable, for spacing see derating
• Status display
  Yellow LED
• Conductor cross section solid
  0.2 mm² ... 2.5 mm²
• Rated surge voltage
  6 kV
• Insulation
  Safe isolation (IEC 60947-1) in the auxiliary circuit ≤ 300 V AC
• Identification
  ≤ 3
• FLA
  3 A (480 V AC)
REACh SVHC
Lead 7439-92-1
ECLASS 7.0
27024002
ECLASS 9.0
27370905
UNSPSC 6.01
30211915
UNSPSC 19.0
25173902
Depth
114 mm
Ambient temperature (storage/transport)
-40 °C ... 80 °C
Type of protection
Surge protection
Switching level
< 5 V DC (For EMERGENCY STOP)
Load current range
180 mA ... 3 A (see to derating)
Mounting type
DIN rail mounting
Operating voltage display
Green LED
Maximum power dissipation
4.1 W
Conductor cross section flexible
0.2 mm² ... 2.5 mm²
Overvoltage category
III
Designation
Category (ISO 13849)
Additional text
Safe shutdown
ECLASS 5.1
27024000
ETIM 2.0
EC001037
ETIM 3.0
EC001037
UNSPSC 20.0
25173902
UNSPSC 18.0
25173902
Type of note
Notes on operation
Maximum altitude
≤ 2000 m
Rated actuating current IC
7 mA
Rated operating voltage Ue
500 V AC
Leakage current
0 mA
Response time
< 0.5 s
Operating mode
100% operating factor
Stripping length
10 mm
Conductor cross section AWG
24 ... 14
Standards/regulations
IEC 60947-1
SCCR
100 kA (480 V AC (fuse: 30 A class CC/30 A class J (high fault)))
ECLASS 11.0
27370905
ETIM 4.0
EC001037
ETIM 7.0
EC001037
UNSPSC 7.0901
39121514
UNSPSC 12.01
39121514
Note
If this device is to be used in combination with the CrossPowerSystem power distribution board, the device mount for the 16 A fuse (order designation: EM-CPS-DA-22,5F/16A; order number: 1002668) is required in order to attach the hybrid motor starter to t
Rated control circuit supply voltage US
24 V DC
Rated actuating voltage UC
24 V DC
Triggering voltage range
19.2 V DC ... 30 V DC
Output name
AC output
Trigger characteristic in acc. with IEC 60947-4-2
Class 10
Operate threshold
> 33 A
Minimum power dissipation
0.88 W
Connection name
Load circuit
Connection method
Push-in connection
Rated insulation voltage
550 V
Degree of pollution
2
Certificate
NLDX.E228652
ECLASS 5.0
27024000
ECLASS 6.0
27024000
ETIM 6.0
EC001037
UNSPSC 13.2
25173902
UNSPSC 11
39121514
Width
22.5 mm
Category code
NLDX / NRNT
ECLASS 10.0.1
27370905
Group installation
20 A (class RK5, SCCR 5kA (480 V AC), #24 - 14 AWG max. solid and stranded)
Horsepower ratings
0.5 hp (208 V AC)
ECLASS 4.0
27021100
Rated control supply current IS
65 mA
Ambient temperature (operation)
-5 °C ... 55 °C (observe derating)
China RoHS
Environmentally Friendly Use Period = 50 years
ECLASS 4.1
27021100
Degree of protection
IP20
Operating voltage range
42 V AC ... 550 V AC

Product condition