2908501 Phoenix Contact Relays
Part#:2908501
Manufacturer:Phoenix Contact
Product Lifecycle:Active
Checking verified in-stock parts...
About the product: Pre-assembled relay module with screw connection, consisting of: relay base, power contact relay, plug-in display/interference suppression module, and retaining bracket. Contact type: 2 changeover contacts. Input voltage: 12 V DCRIF-1... relay base, for m
About the manufacturer: Phoenix Contact develops and manufactures industrial electrical and electronic technology products that power, protect, connect and automate systems and equipment.
Check out the 2908501 Phoenix Contact price in the box on the right side or send a quick quote.
2908501 Product Details
- Connection method Screw connection
- Conductor cross-section solid (2 conductors with same cross section) 0.5 mm² ... 2.5 mm²
- Rated surge voltage 6 kV
- Pollution degree 2
- China RoHS Environmentally Friendly Use Period = 50 years
- Type of note Notes on operation
- Note FBS 2-6... plug-in bridge for the input side (A2) and FBS-2-8... plug-in bridge for the output side (11/21)
- Ambient temperature (operation) -40 °C ... 70 °C
- Nominal input voltage UN 12 V DC
- Degree of protection IP20 (Relay base)
- Typical response time 8 ms
- Contact type 2 changeover contacts
- Contact material AgNi
- Maximum switching voltage 250 V AC/DC
- Maximum inrush current 25 A (20 ms, N/O contacts)
- Switching capacity 2 A (at 24 V, DC13)
- Flammability rating according to UL 94 V2 (Housing)
- Assembly instructions In rows with zero spacing
- Conductor cross section solid 0.5 mm² ... 4 mm²
- Conductor cross section flexible (2 conductors with same cross section) 0.5 mm² ... 2.5 mm²
- Torque 0.5 Nm ... 0.6 Nm
- Conductor cross section AWG 20 ... 10 (solid)
- Identification ISA-S71.04. G3 Harsh Group
- ECLASS 10.0.1 27371601
- ECLASS 5.0 27371600
- Designation Corrosive gas test
- ECLASS 6.0 27371600
- ETIM 3.0 EC001437
- UNSPSC 7.0901 39121516
- ETIM 7.0 EC001437
- Utilization restriction EMC: class A product, see manufacturer's declaration in the download area
- Height 89 mm
- Width 16 mm
- Input voltage range in reference to UN see diagram
- Typical release time 10 ms
- Protective circuit Damping diode
- Operating voltage display Yellow LED
- Minimum switching voltage 5 V (at 10 mA)
- Limiting continuous current 8 A (see diagram)
- Interrupting rating (ohmic load) max. 192 W (at 24 V DC)
- Test voltage 4 kVrms (50 Hz, 1 min., winding/contact)
- Mounting position any
- Connection name Contact side
- Stripping length 8 mm
- Depth 75 mm
- Ambient temperature (storage/transport) -40 °C ... 85 °C
- Typical input current at UN 33 mA
- Coil voltage 12 V DC
- Type of switch contact Single contact
- Min. switching current 10 mA (At 5 V)
- Operating mode 100% operating factor
- Mechanical service life approx. 3x 107 cycles
- Service life, electrical see diagram
- Conductor cross section flexible 0.5 mm² ... 4 mm²
- Standards/regulations DIN EN 50178
- Insulation Safe isolation, basic insulation, and 4 kV rated surge voltage between all changeover contacts.
- Overvoltage category III
- ECLASS 11.0 27371601
- ECLASS 9.0 27371601
- ETIM 6.0 EC001437
- UNSPSC 6.01 30211917
- UNSPSC 18.0 39122334
- UNSPSC 19.0 39122334
- ECLASS 5.1 27371600
- ECLASS 7.0 27371601
- ETIM 2.0 EC001437
- UNSPSC 11 39121516
- UNSPSC 20.0 39122334
- ETIM 4.0 EC001437
- UNSPSC 12.01 39121516
- UNSPSC 13.2 39122334
- UNSPSC 21.0 39122334
Product condition
New Factory Sealed
New Factory Sealed - New condition, never used surplus in original packaging with original factory seal.
Shipping and Delivery Worldwide
calculate cost and time at Checkout
Secure Payment Processing
with money back guarantee
1 year warranty
on all parts
Responsive Customer Support
we're here to help!
Need more details?
Feel free to chat with us or check our FAQ
Relevant products
Do you have questions?
We’re here for you ✨