2906202 Phoenix Contact Electrical Measuring & Monitoring Instruments

2906202 Product Details

• Depth
  119.2 mm
• Number of inputs
  1
• max. input voltage
  12 V
• Configurable/programmable
  Yes
• Max. input current
  24 mA
• Frequency output: min. load
  4 mA ≤ (UL / RL) ≤ 100 mA
• PWM output: signal
  15.6 kHz (10 bits, via DIP switch)
• Connection method
  Push-in connection
• Conductor cross section solid
  0.2 mm² ... 2.5 mm² (with ferrule)
• Maximum temperature coefficient
  < 0.01 %/K
• Electromagnetic compatibility
  Conformance with EMC directive
• Color
  gray
• Conformance
  CE-compliant
• Utilization restriction
  EMC: class A product, see manufacturer's declaration in the download area
• Ambient temperature (operation)
  -40 °C ... 70 °C
• Permissible humidity (operation)
  5 % ... 95 % (non-condensing)
• Width
  6.2 mm
• Degree of protection
  IP20 (not assessed by UL)
• Input resistance of voltage input
  > 120 kΩ
• Min. switching current
  100 µA
Load current maximum
100 mA
Supply voltage range
9.6 V DC ... 30 V DC (The DIN rail bus connector (ME 6,2 TBUS-2 1,5/5-ST-3,81 GN, Order No. 2869728) can be used to bridge the supply voltage. It can be snapped onto a 35 mm DIN rail according to EN 60715))
Typical current consumption
27 mA (12 V DC)
Temperature coefficient, typical
0.01 %/K
Degree of pollution
2
Fire protection for rail vehicles (DIN EN 45545-2) R23
HL 1 - HL 2
ATEX
 II 3 G Ex nA IIC T4 Gc X
DNV GL-EMC
A
Identification
UL 508 Listed
ECLASS 10.0.1
27210120
Height
109.81 mm
Maximum altitude
≤ 2000 m
Mounting position
any
DNV GL-Vibration
A
Designation
Shipbuilding approval
Current input signal
0 mA ... 20 mA (via DIP switch)
Number of outputs
1
Overrange/underrange
Can be set (via software)
Power consumption
≤ 350 mW (9.6 V DC)
Vibration
A
EMC
A
Conductor cross section AWG
24 ... 12 (flexible)
Overvoltage category
II
Test voltage, input/output/supply
3 kV (50 Hz, 1 min.)
Rated insulation voltage
300 V (effective)
Housing material
PBT
Ambient temperature (storage/transport)
-40 °C ... 85 °C
Fire protection for rail vehicles (DIN EN 45545-2) R24
HL 1 - HL 2
UL, USA/Canada
UL 508 Listed
DNV GL-Enclosure
Required protection according to the Rules shall be provided upon installation on board
Noise immunity
EN 61000-6-2 When being exposed to interference, there may be minimal deviations.
Voltage input signal
0 V ... 10 V (via DIP switch)
Input resistance current input
approx. 50 Ω (+0.7 V for test diode)
Minimum switching voltage
1 V DC
Max. switching current
100 mA (30 V DC)
PWM output: min. load
12 mA ≤ (UL / RL) ≤ 100 mA
Step response (0–99%)
120 ms (15 Hz sample rate)
Stripping length
10 mm
No. of channels
1
Frequency output: signal
0 Hz ... 10 kHz (via DIP switch)
Nominal supply voltage
24 V DC
Conductor cross section flexible
0.14 mm² ... 2.5 mm²
Electrical isolation
Reinforced insulation in accordance with IEC 61010-1
Noise emission
EN 61000-6-4
Fire protection for rail vehicles (DIN EN 45545-2) R22
HL 1 - HL 2
Output name
Frequency output / switching output
Maximum switching voltage
30 V DC
DNV GL-Temperature
B
Temperature
B
REACh SVHC
Lead 7439-92-1
ECLASS 4.0
27210100
ECLASS 5.1
27210100
ECLASS 9.0
27210120
UNSPSC 19.0
39121008
DNV GL-Humidity
B
Certificate
DNV GL TAA000021E
Humidity
B
ECLASS 4.1
27210100
ECLASS 6.0
27210100
UNSPSC 13.2
39121008
UNSPSC 20.0
39121008
Assembly instructions
The T connector can be used to bridge the supply voltage. It can be snapped onto a 35 mm DIN rail according to EN 60715.
China RoHS
Environmentally Friendly Use Period = 50 years
UNSPSC 18.0
39121008
ETIM 4.0
EC002653
ECLASS 11.0
27210120
ECLASS 5.0
27210100
Enclosure
Required protection according to the Rules shall be provided upon installation on board
ETIM 6.0
EC002653
ECLASS 7.0
27210120
UNSPSC 21.0
39121008
ETIM 7.0
EC002653

Product condition