2905629 Phoenix Contact Electrical Measuring & Monitoring Instruments
Part#:2905629
Manufacturer:Phoenix Contact
Product Lifecycle:Active
In-stock parts: 1
04/20/2024
About the product: 4-way power supply doubler with plug-in connection technology. HART-transparent, 0(4) mA ... 20 mA input signal, 0(4) mA ... 20 mA output signals. The device can be used in both signal and power supply doubler modes. Push-in connection technology.
About the manufacturer: Phoenix Contact is one of the manufacturers that offers Electrical Measuring & Monitoring Instruments that you can order at Quotebeam.com. Phoenix Contact manufactures industrial electrical and electronic technology products that offer power, protection, connectivity, and automation for systems and equipment.
Check out the 2905629 Phoenix Contact price in the box on the right side or send a quick quote.
2905629 Product Details
- Degree of pollution 2
- Housing material PBT
- Conductor cross section flexible 0.14 mm² ... 2.5 mm²
- No. of channels 2
- Electrical isolation Reinforced insulation in accordance with IEC 61010-1
- Rated insulation voltage 300 V
- Mounting position any
- Width 6.2 mm
- Maximum temperature coefficient 0.0075 %/K
- Vibration A
- Color gray
- Number of outputs 2
- Load/output load current output ≤ 500 Ω (per channel)
- Stripping length 10 mm
- Permissible humidity (operation) 5 % ... 95 % (non-condensing)
- Utilization restriction EMC: class A product, see manufacturer's declaration in the download area
- Ambient temperature (operation) -40 °C ... 70 °C
- Conductor cross section solid 0.2 mm² ... 2.5 mm² (with ferrule)
- REACh SVHC Lead 7439-92-1
- ETIM 7.0 EC002653
- Height 109.81 mm
- Number of inputs 1
- Transmitter supply voltage > 19.5 V
- Typical current consumption 40 mA (For 24 V DC and in signal duplicator mode)
- Connection method Push-in connection
- Depth 119.2 mm
- Noise immunity EN 61000-6-2 When being exposed to interference, there may be minimal deviations.
- Supply voltage range 9.6 V DC ... 30 V DC (The DIN rail bus connector (ME 6,2 TBUS-2 1,5/5-ST-3,81 GN, Order No. 2869728) can be used to bridge the supply voltage. It can be snapped onto a 35 mm DIN rail according to EN 60715))
- Standards/regulations EN 61000-4-6
- ECLASS 4.1 27210100
- Ambient temperature (storage/transport) -40 °C ... 85 °C
- Power consumption 1.6 W (at IOUT = 20 mA, 500 Ω load)
- Conductor cross section AWG 24 ... 12 (flexible)
- Current input signal 4 mA ... 20 mA (Power supply and signal duplicator mode)
- Input resistance current input 90 Ω (+1.6 V)
- Nominal supply voltage 24 V DC
- Description of the input Current input (sensor circuit)
- Output name Current output
- Transmission Behavior 1:1 to input signal
- Degree of protection IP20 (not assessed by UL)
- Max. output current 25 mA
- Test voltage, input/output/supply 3 kV (50 Hz, 1 min.)
- China RoHS Environmentally Friendly Use Period = 50 years
- ECLASS 5.1 27210100
- Maximum transmission error 0.05 % (of final value)
- Electromagnetic compatibility Conformance with EMC directive
- Assembly instructions The T connector can be used to bridge the supply voltage. It can be snapped onto a 35 mm DIN rail according to EN 60715.
- Fire protection for rail vehicles (DIN EN 45545-2) R23 HL 1 - HL 2
- Identification UL 508 Listed
- EMC A
- ECLASS 10.0.1 27210120
- ECLASS 5.0 27210100
- ECLASS 9.0 27210120
- Current output signal 4 mA ... 20 mA (repeater power supply and isolator operation)
- Overvoltage category II
- Noise emission EN 61000-6-4
- Fire protection for rail vehicles (DIN EN 45545-2) R24 HL 1 - HL 2
- Humidity B
- ECLASS 4.0 27210100
- ETIM 6.0 EC002653
- Ripple < 20 mVPP (at 500 Ω)
- Certificate DNV GL TAA000021E
- Enclosure Required protection according to the Rules shall be provided upon installation on board
- ECLASS 6.0 27210100
- Limit frequency (3 dB) approx. 1 kHz
- Step response (10-90%) < 400 µs (typ.)
- Fire protection for rail vehicles (DIN EN 45545-2) R22 HL 1 - HL 2
- Designation Shipbuilding approval
- Temperature B
- ECLASS 11.0 27210120
- ECLASS 7.0 27210120
- ETIM 4.0 EC002653
Product condition
New Factory Sealed
New Factory Sealed - New condition, never used surplus in original packaging with original factory seal.
This item can ship within 3 days!
1-year warranty
$396.90
2905629
Stock:
1
Select Qty:
$396.90
$396.90 each
Shipping and Delivery Worldwide
calculate costs and time
Secure Payment Processing
with money back guarantee
1 year warranty
on all parts
Responsive Customer Support
we're here to help!
Need more details?
Feel free to chat with us or check our FAQ
Relevant products
Do you have questions?
We’re here for you ✨