2905248 Phoenix Contact Electrical Measuring & Monitoring Instruments
Part#:2905248
Manufacturer:Phoenix Contact
Product Lifecycle:Active
Checking verified in-stock parts...
About the product: Configurable temperature transducer with plug-in connection technology for connecting thermocouples. Configurable via DIP switch or software. Push-in connection technology, order configuration
About the manufacturer: Phoenix Contact develops and manufactures industrial electrical and electronic technology products that power, protect, connect and automate systems and equipment.
Check out the 2905248 Phoenix Contact price in the box on the right side or send a quick quote.
2905248 Product Details
- Ambient temperature (storage/transport) -40 °C ... 85 °C
- Noise immunity EN 61000-6-2 When being exposed to interference, there may be minimal deviations.
- Voltage output signal 0 V ... 5 V (via DIP switch)
- Short-circuit current < 31.5 mA
- Typical current consumption 32.7 mA (24 V DC)
- Permissible humidity (operation) 5 % ... 95 % (non-condensing)
- Configurable/programmable Yes
- Current output signal 0 mA ... 20 mA (via DIP switch)
- Load/output load current output ≤ 600 Ω (at 20 mA)
- Width 6.2 mm
- Degree of protection IP20 (not assessed by UL)
- Utilization restriction EMC: class A product, see manufacturer's declaration in the download area
- Height 109.81 mm
- Number of outputs 1
- Max. output current 24.6 mA
- Connection method Push-in connection
- ECLASS 5.1 27200200
- ETIM 4.0 EC001446
- UNSPSC 11 39121008
- UNSPSC 20.0 41112105
- Typical deviation from the measuring range final value 0.05 %
- Load/output load voltage output ≥ 10 kΩ
- Power consumption ≤ 850 mW (at IOUT = 20 mA, 9.6 V DC, 600 Ω load)
- Conductor cross section solid 0.2 mm² ... 2.5 mm² (with ferrule)
- Maximum temperature coefficient ≤ 0.01 %/K
- Transmission error thermocouples 0.1% * 600 K / set measuring range; 0.1% > 600 K (C, E, J, K, N, T, L, U, M Gost, L Gost)
- Test voltage, input/output/supply 3 kV (50 Hz, 1 min.)
- Fire protection for rail vehicles (DIN EN 45545-2) R24 HL 1 - HL 2
- Conformance CE-compliant
- China RoHS Environmentally Friendly Use Period = 50 years
- UNSPSC 6.01 30211506
- UNSPSC 12.01 39121008
- ECLASS 7.0 27200206
- UNSPSC 7.0901 39121008
- ETIM 6.0 EC002919
- ECLASS 4.0 27200200
- ECLASS 11.0 27210129
- UNSPSC 18.0 41112105
- UNSPSC 19.0 41112105
- UL, USA/Canada UL 508 Listed
- ETIM 3.0 EC001446
- Standards/regulations EN 61000-4-6
- Fire protection for rail vehicles (DIN EN 45545-2) R23 HL 1 - HL 2
- Depth 119.2 mm
- Max. output voltage approx. 12.3 V
- Stripping length 10 mm
- Conductor cross section AWG 24 ... 12 (flexible)
- Typical cold point errors 2 K (2 K + (0,2 K * ΔT))
- Degree of pollution 2
- Rated insulation voltage 300 V (effective)
- Designation Shipbuilding approval
- Certificate DNV GL 14445-15HH
- ECLASS 10.0.1 27210129
- ETIM 7.0 EC002919
- UNSPSC 13.2 41112105
- UNSPSC 21.0 41112105
- Sensor types that can be used (TC) B, C, E, J, K, N, R, S, T, L, U, A-1, A-2, A-3, M, L
- Ripple < 10 mVrms
- Supply voltage range 9.6 V DC ... 30 V DC (The DIN rail bus connector (ME 6,2 TBUS-2 1,5/5-ST-3,81 GN, Order No. 2869728) can be used to bridge the supply voltage. It can be snapped onto a 35 mm DIN rail according to EN 60715))
- Conductor cross section flexible 0.14 mm² ... 2.5 mm²
- Overvoltage category II
- Assembly instructions The T connector can be used to bridge the supply voltage. It can be snapped onto a 35 mm DIN rail according to EN 60715.
- ATEX II 3 G Ex nA IIC T4 Gc X
- REACh SVHC Lead 7439-92-1
- ECLASS 4.1 27200200
- ECLASS 5.0 27200200
- Ambient temperature (operation) -40 °C ... 70 °C
- Temperature measuring range -250 °C ... 2500 °C (Range depends on sensor type, range can be set freely via software or in increments from -150°C to 1350°C via DIP switches)
- Electrical isolation Reinforced insulation in accordance with IEC 61010-1
- Housing material PBT
- Mounting position any
- ECLASS 9.0 27210129
- Protective circuit Transient protection
- Electromagnetic compatibility Conformance with EMC directive
- Noise emission EN 61000-6-4
- Fire protection for rail vehicles (DIN EN 45545-2) R22 HL 1 - HL 2
- Identification C, EMC2
- ECLASS 6.0 27200200
- ETIM 2.0 EC001446
Product condition
New Factory Sealed
New Factory Sealed - New condition, never used surplus in original packaging with original factory seal.
Shipping and Delivery Worldwide
calculate cost and time at Checkout
Secure Payment Processing
with money back guarantee
1 year warranty
on all parts
Responsive Customer Support
we're here to help!
Need more details?
Feel free to chat with us or check our FAQ
Relevant products
Do you have questions?
We’re here for you ✨