2905027 Phoenix Contact Electrical Measuring & Monitoring Instruments

2905027 Product Details

• Utilization restriction
  EMC: class A product, see manufacturer's declaration in the download area
• Degree of protection
  IP20 (not assessed by UL)
• Voltage input signal
  0 V ... 10 V (via DIP switch)
• Max. output voltage
  approx. 12.3 V
• Identification
  UL 508 Listed
• Depth
  119.2 mm
• Maximum altitude
  ≤ 2000 m
• Current input signal
  0 mA ... 20 mA (via DIP switch)
• Height
  109.81 mm
• Number of inputs
  1
• Max. input current
  24 mA
• Load/output load voltage output
  ≥ 10 kΩ
• Nominal supply voltage
  24 V DC
• Connection method
  Push-in connection
• Degree of pollution
  2
• Color
  gray
• Electromagnetic compatibility
  Conformance with EMC directive
• Fire protection for rail vehicles (DIN EN 45545-2) R22
  HL 1 - HL 2
• UL, USA/Canada
  UL 508 Listed
• DNV GL-EMC
  A
Certificate
DNV GL TAA000021E
REACh SVHC
Lead 7439-92-1
Ambient temperature (operation)
-40 °C ... 70 °C
Ambient temperature (storage/transport)
-40 °C ... 85 °C
Noise immunity
EN 61000-6-2 When being exposed to interference, there may be minimal deviations.
Input resistance current input
approx. 50 Ω (+0.7 V for test diode)
Max. output current
24.6 mA
Typical current consumption
55 mA (24 V DC)
Stripping length
10 mm
Conductor cross section AWG
24 ... 12 (flexible)
Housing material
PBT
Noise emission
EN 61000-6-4
Fire protection for rail vehicles (DIN EN 45545-2) R23
HL 1 - HL 2
DNV GL-Temperature
B
Vibration
A
Humidity
B
ECLASS 5.1
27210100
ETIM 6.0
EC002653
Width
6.2 mm
Permissible humidity (operation)
5 % ... 95 % (non-condensing)
max. input voltage
12 V
Voltage output signal
0 V ... 10 V (via DIP switch)
Number of outputs
2
Short-circuit current
≤ 25 mA
Conductor cross section flexible
0.14 mm² ... 2.5 mm²
Maximum transmission error
0.05 % (of final value)
Mounting position
any
Load/output load current output
≤ 600 Ω (per channel)
Supply voltage range
9.6 V DC ... 30 V DC (The DIN rail bus connector (ME 6,2 TBUS-2 1,5/5-ST-3,81 GN, Order No. 2869728) can be used to bridge the supply voltage. It can be snapped onto a 35 mm DIN rail according to EN 60715))
Conductor cross section solid
0.2 mm² ... 2.5 mm² (with ferrule)
Electrical isolation
Reinforced insulation in accordance with IEC 61010-1
Maximum temperature coefficient
0.01 %/K
Rated insulation voltage
300 V
Conformance
CE-compliant
Standards/regulations
EN 61000-4-6
DNV GL-Enclosure
Required protection according to the Rules shall be provided upon installation on board
EMC
A
ECLASS 4.1
27210100
ETIM 4.0
EC002653
UNSPSC 18.0
39121008
China RoHS
Environmentally Friendly Use Period = 50 years
ECLASS 11.0
27210120
ECLASS 9.0
27210120
UNSPSC 6.01
30211506
UNSPSC 13.2
39121008
DNV GL-Humidity
B
ECLASS 4.0
27210100
ETIM 7.0
EC002653
ECLASS 5.0
27210100
UNSPSC 19.0
39121008
UNSPSC 12.01
39121008
UNSPSC 11
39121008
UNSPSC 21.0
39121008
Configurable/programmable
Yes
Current output signal
0 mA ... 20 mA (via DIP switch)
Ripple
< 20 mVPP (at 600 Ω)
No. of channels
2
Typical deviation from the measuring range final value
2.8 %
UNSPSC 7.0901
39121008
UNSPSC 20.0
39121008
Test voltage, input/output/supply
3 kV (50 Hz, 1 min.)
Assembly instructions
The T connector can be used to bridge the supply voltage. It can be snapped onto a 35 mm DIN rail according to EN 60715.
Enclosure
Required protection according to the Rules shall be provided upon installation on board
ECLASS 7.0
27210120
Input resistance of voltage input
> 120 kΩ
Overvoltage category
II
Fire protection for rail vehicles (DIN EN 45545-2) R24
HL 1 - HL 2
ECLASS 6.0
27210100
Designation
Shipbuilding approval
ATEX
 II 3 G Ex nA IIC T4 Gc X
Power consumption
≤ 1.5 W (at IOUT = 20 mA, 9.6 V DC, 600 Ω load)
DNV GL-Vibration
A
Temperature
B
ECLASS 10.0.1
27210120

Product condition