2904621 Phoenix Contact AC/DC Power Supplies

2904621 Product Details

• Width with alternative assembly
  122 mm
• Installation distance right/left
  5 mm / 5 mm
• Inflammability class in acc. with UL 94 (housing / terminal blocks)
  V0
• Degree of pollution
  2
• Input voltage range
  3x 400 V AC ... 500 V AC -20 % ... +10 %
• Current consumption
  3x 0.5 A (400 V AC)
• Mains buffering time
  typ. 29 ms (3x 400 V AC)
• Nominal output voltage
  24 V DC
• Derating
  > 60 °C ... 70 °C (2.5%/K)
• Connection in parallel
  Yes, for redundancy and increased capacity
• Residual ripple
  < 75 mVPP (with nominal values)
• Power loss nominal load max.
  < 19 W (400 V AC)
• MTBF (IEC 61709, SN 29500)
  > 1034000 h (25 °C)
• Connection method
  Push-in connection
• Conductor cross section flexible min.
  0.2 mm²
• Conductor cross section AWG max.
  16
• Standard - Electrical safety
  IEC 61010-2-201 (SELV)
• Width
  50 mm
• Depth with alternative assembly
  53 mm
• Ambient temperature (start-up type tested)
  -40 °C
Nominal input voltage range
3x 400 V AC ... 500 V AC
Frequency range (fN)
50 Hz ... 60 Hz -10 % ... +10 %
Power factor (cos phi)
0.91
Protective circuit/component
Varistor, gas-filled surge arrester
Nominal output current (IN)
10 A
Feedback voltage resistance
≤ 35 V DC
Control deviation
< 0.5 % (Static load change 10 % ... 90 %)
Efficiency
typ. 93 % (400 V AC)
Mounting position
horizontal DIN rail NS 35, EN 60715
Conductor cross section solid min.
0.2 mm²
Conductor cross section AWG min.
24
Standard - Safety of transformers
IEC 61558-2-16 pending
Standard - Safe isolation
IEC 61558-2-16 pending
CSA
CAN/CSA-C22.2 No. 60950-1-07
SIQ
BG (type approved)
Conducted noise emission
EN 55016
DNV GL noise radiation
Class B
Discharge in air
15 kV (Test Level 4)
Electromagnetic HF field
EN 61000-4-3
Signal
4 kV (Test Level 4 - asymmetrical)
Voltage dips
EN 61000-4-11
Height
130 mm
Installation distance top/bottom
50 mm / 50 mm
Ambient temperature (storage/transport)
-40 °C ... 85 °C
Climatic class
3K3 (in acc. with EN 60721)
Inrush current
typ. 3 A (at 25 °C)
Recommended breaker for input protection
3x 4 A ... 20 A (Characteristic B, C or comparable)
Selective Fuse Breaking (ISFB)
60 A (15 ms)
Output power
240 W
Net weight
0.9 kg
Environmental protection directive
RoHS Directive 2011/65/EU
Insulation voltage input / PE
3.5 kV AC (type test)
Conductor cross section flexible max.
1.5 mm²
Stripping length
8 mm
EMC requirements, power plant
IEC 61850-3
Standard - power supply devices for low voltage with DC output
EN 61204-3
Rail applications
EN 50121-3-2
Noise emission
EN 55016
DNV GL conducted interference
Class A
Test field strength
110 A/m
Comments
Criterion A
Conducted interference
EN 61000-4-6
I/O/S
asymmetrical
Number of periods
5 / 10 / 50 periods
Test level 1
15 Hz 150 Hz (Test Level 4)
Test level 3
1.5 kHz 15 kHz (Test Level 4)
Input, output (test level 1)
100 kHz 1 MHz (Test Level 3 - symmetrical)
Depth
125 mm
Degree of protection
IP20
Max. permissible relative humidity (operation)
≤ 95 % (at 25 °C, non-condensing)
Discharge current to PE
< 3.5 mA
Nominal power consumption
274 VA
Static Boost (IStat.Boost)
12.5 A
Connection in series
yes
Typical response time
300 ms (from SLEEP MODE)
Insulation voltage input/output
4 kV AC (type test)
Protection class
I
Assembly instructions
alignable: PN ≥50%, 5 mm horizontally, 15 mm next to active components, 50 mm verticallyalignable: PN <50%, 0 mm horizontally, 40 mm vertically top, 20 mm vertically bottom
EMC requirements for noise immunity
EN 61000-6-1
Standard – Safety extra-low voltage
IEC 61010-1 (SELV)
Standard - safety for equipment for measurement, control, and laboratory use
IEC 61010-1
UL approvals
UL Listed UL 508
Low Voltage Directive
Conformance with Low Voltage Directive 2014/35/EC
Flicker
EN 61000-3-3
Electrostatic discharge
EN 61000-4-2
Output
1 kV (Test Level 3 - symmetrical)
Frequency
50 Hz
Asymmetrical conducted disturbance variables
EN 61000-4-16
Attenuated oscillating wave
EN 61000-4-18
Criterion C
Temporary adverse effects on the operating behavior, which the device corrects automatically or which can be restored by actuating the operating elements.
ECLASS 5.1
27242213
UNSPSC 21.0
39121004
Height with alternative assembly
130 mm
Ambient temperature (operation)
-25 °C ... 70 °C (> 60 °C Derating: 2.5 %/K)
Installation height
≤ 5000 m (> 2000 m, observe derating)
AC frequency range
50 Hz ... 60 Hz -10 % ... +10 %
Type of protection
Transient surge protection
Setting range of the output voltage (USet)
24 V DC ... 29.5 V DC (constant capacity)
Dynamic Boost (IDyn.Boost)
20 A (5 s)
Protection against overvoltage at the output (OVP)
≤ 32 V DC
Maximum power dissipation in no-load condition
< 5 W (400 V AC)
Insulation voltage output / PE
0.5 kV DC (type test)
Conductor cross section solid max.
1 mm²
EMC requirements for noise emission
EN 61000-6-3
HART FSK Physical Layer Test Specification Compliance
Output voltage UOut compliant
Standard – Limitation of mains harmonic currents
EN 61000-3-2
Shipbuilding approval
DNV GL, PRS, BV, LR, ABS
Additional text
Test Level 2
Frequency range
50 Hz ... 60 Hz
Fast transients (burst)
EN 61000-4-4
Power frequency magnetic field
EN 61000-4-8
Voltage dip
40 %
Test level 2
150 Hz 1.5 kHz (Test Level 4)
Test level 4
15 kHz 150 kHz (Test Level 4)
Test level 6
16.7 Hz 50 Hz 60 Hz (Test Level 4)
Input, output (test level 3)
100 kHz 1 MHz (Test Level 3 - asymmetrical)
Criterion B
Temporary impairment to operational behavior that is corrected by the device itself.
ECLASS 6.0
27049005
ECLASS 9.0
27040701
Mains variation/undervoltage
SEMI F47-0706, EN 61000-4-11
Electromagnetic compatibility
Conformance with EMC Directive 2014/30/EU
Harmonic currents
EN 61000-3-2
Contact discharge
8 kV (Test Level 4)
Input
2 kV (Test Level 4 - symmetrical)
Surge voltage load (surge)
EN 61000-4-5
Voltage
2.5 kV
Pulse-shape magnetic field
EN 61000-4-9
Attenuated sinusoidal oscillations (ring wave)
EN 61000-4-12
Test level 5
16.7 Hz 50 Hz 60 Hz (Test Level 4)
Signals (test level 1)
100 kHz 1 MHz (Test Level 3 - symmetrical)
Criterion A
Normal operating behavior within the specified limits.
ECLASS 11.0
27040701
ETIM 6.0
EC002540
UNSPSC 20.0
39121004
Damped oscillating magnetic field
EN 61000-4-10
Input, output (test level 2)
10 MHz
China RoHS
Environmentally Friendly Use Period = 25;
UNSPSC 18.0
39121004
Signals (test level 2)
100 kHz 1 MHz (Test Level 3 - asymmetrical)
REACh SVHC
Lead 7439-92-1
ECLASS 10.0.1
27040701
UNSPSC 13.2
39121004
UNSPSC 19.0
39121004

Product condition