2903351 Phoenix Contact Relays
Part#:2903351
Manufacturer:Phoenix Contact
Product Lifecycle:Active
Checking verified in-stock parts...
About the product: Pre-assembled relay module with screw connection, consisting of: relay base, multi-layer contact relay, plug-in display/interference suppression module, and retaining bracket. Contact type: 1 changeover contact. Input voltage: 230 V ACRIF-1... relay base,
About the manufacturer: Phoenix Contact develops and manufactures industrial electrical and electronic technology products that power, protect, connect and automate systems and equipment.
Check out the 2903351 Phoenix Contact price in the box on the right side or send a quick quote.
2903351 Product Details
- Utilization restriction EMC: class A product, see manufacturer's declaration in the download area
- Height 89 mm
- Degree of protection IP20 (Relay base)
- Typical input current at UN 6 mA
- Contact type 1 changeover contact
- Connection name Contact side
- Conductor cross-section solid (2 conductors with same cross section) 0.5 mm² ... 2.5 mm²
- Torque 0.5 Nm ... 0.6 Nm
- Note the following values are applicable if a gold layer is destroyed
- Ambient temperature (storage/transport) -40 °C ... 85 °C
- Mains frequency 50/60 Hz
- Typical response time 3 ms ... 12 ms
- Contact material AgNi
- Maximum inrush current 50 mA
- Flammability rating according to UL 94 V2 (Housing)
- Mechanical service life approx. 107 cycles
- Conductor cross section solid 0.5 mm² ... 4 mm²
- Standards/regulations DIN EN 50178
- ECLASS 10.0.1 27371601
- ECLASS 5.0 27371600
- ETIM 3.0 EC001437
- UNSPSC 6.01 30211917
- UNSPSC 18.0 39122334
- Width 16 mm
- Ambient temperature (operation) -40 °C ... 50 °C
- Input voltage range in reference to UN see diagram
- Coil voltage 230 V AC
- Protective circuit Varistor
- Limiting continuous current 25 A (20 ms, N/O contacts)
- Test voltage 4 kVrms (50 Hz, 1 min., winding/contact)
- Operating mode 100% operating factor
- Connection method Screw connection
- Conductor cross section AWG 20 ... 10 (solid)
- Overvoltage category III
- Designation Corrosive gas test
- ECLASS 9.0 27371601
- UNSPSC 11 39121516
- UNSPSC 13.2 39122334
- Type of note Notes on operation
- Depth 75 mm
- Nominal input voltage UN 230 V AC
- Typical release time range 3 ms ... 20 ms
- Operating voltage display Yellow LED
- Maximum switching voltage 250 V AC/DC
- Min. switching current 10 mA (at 12 V)
- Interrupting rating (ohmic load) max. 240 W (at 24 V DC)
- Service life, electrical see diagram
- Mounting position any
- Conductor cross section flexible (2 conductors with same cross section) 0.5 mm² ... 2.5 mm²
- Insulation safe isolation
- China RoHS Environmentally Friendly Use Period = 50 years
- ECLASS 4.0 27371100
- ECLASS 7.0 27371601
- ETIM 7.0 EC001437
- UNSPSC 12.01 39121516
- UNSPSC 21.0 39122334
- Type of switch contact Single contact
- Minimum switching voltage 12 V (at 10 mA)
- Switching capacity 2 A (at 24 V, DC13)
- Assembly instructions In rows with zero spacing
- Stripping length 8 mm
- Conductor cross section flexible 0.5 mm² ... 4 mm²
- Rated surge voltage 6 kV
- Rated insulation voltage 250 V AC
- Identification ISA-S71.04. G3 Harsh Group
- ECLASS 5.1 27371600
- ETIM 2.0 EC001437
- ETIM 6.0 EC001437
- UNSPSC 20.0 39122334
- Pollution degree 2
- ECLASS 11.0 27371601
- ECLASS 4.1 27371100
- ECLASS 6.0 27371600
- ETIM 4.0 EC001437
- UNSPSC 7.0901 39121516
- UNSPSC 19.0 39122334
Product condition
New Factory Sealed
New Factory Sealed - New condition, never used surplus in original packaging with original factory seal.
Shipping and Delivery Worldwide
calculate cost and time at Checkout
Secure Payment Processing
with money back guarantee
1 year warranty
on all parts
Responsive Customer Support
we're here to help!
Need more details?
Feel free to chat with us or check our FAQ
Relevant products
Do you have questions?
We’re here for you ✨