2903348 Phoenix Contact Relays

2903348 Product Details

• Note
  FBS 2-6... plug-in bridge for the input side (A2) and FBS-2-8... plug-in bridge for the output side (11/21)
• Depth
  75 mm
• Mains frequency
  50/60 Hz
• Coil voltage
  120 V AC
• Contact type
  2 changeover contacts
• Contact material
  AgNi
• Interrupting rating (ohmic load) max.
  192 W (at 24 V DC)
• Switching capacity
  2 A (at 24 V, DC13)
• Mechanical service life
  approx. 107 cycles
• Type of note
  Notes on operation
• Ambient temperature (operation)
  -40 °C ... 50 °C
• Nominal input voltage UN
  120 V AC
• Typical release time range
  3 ms ... 20 ms
• Min. switching current
  10 mA (At 5 V)
• Limiting continuous current
  8 A (see diagram)
• Flammability rating according to UL 94
  V2 (Housing)
• Mounting position
  any
• Torque
  0.5 Nm ... 0.6 Nm
• Rated surge voltage
  6 kV
• Overvoltage category
  III
ECLASS 4.1
27371100
ETIM 4.0
EC001437
UNSPSC 7.0901
39121516
UNSPSC 6.01
30211917
UNSPSC 18.0
39122334
Utilization restriction
EMC: class A product, see manufacturer's declaration in the download area
Height
89 mm
Typical input current at UN
8 mA
Typical response time
3 ms ... 12 ms
Minimum switching voltage
5 V (at 10 mA)
Service life, electrical
see diagram
Connection method
Screw connection
Conductor cross section solid
0.5 mm² ... 4 mm²
Insulation
Safe isolation, basic insulation, and 4 kV rated surge voltage between all changeover contacts.
Identification
ISA-S71.04. G3 Harsh Group
ECLASS 6.0
27371600
ECLASS 9.0
27371601
UNSPSC 12.01
39121516
UNSPSC 21.0
39122334
Width
16 mm
Ambient temperature (storage/transport)
-40 °C ... 85 °C
Input voltage range in reference to UN
see diagram
Operating voltage display
Yellow LED
Type of switch contact
Single contact
Maximum inrush current
12 A (20 ms, N/O contacts)
Test voltage
4 kVrms (50 Hz, 1 min., winding/contact)
Stripping length
8 mm
Conductor cross section flexible
0.5 mm² ... 4 mm²
Standards/regulations
DIN EN 50178
ECLASS 10.0.1
27371601
ECLASS 5.0
27371600
ETIM 2.0
EC001437
ETIM 7.0
EC001437
UNSPSC 19.0
39122334
Degree of protection
IP20 (Relay base)
Protective circuit
Varistor
Maximum switching voltage
250 V AC/DC
Operating mode
100% operating factor
Assembly instructions
In rows with zero spacing
Conductor cross-section solid (2 conductors with same cross section)
0.5 mm² ... 2.5 mm²
Conductor cross section AWG
20 ... 10 (solid)
Designation
Corrosive gas test
ECLASS 4.0
27371100
ECLASS 5.1
27371600
ETIM 3.0
EC001437
UNSPSC 11
39121516
UNSPSC 20.0
39122334
Connection name
Contact side
Conductor cross section flexible (2 conductors with same cross section)
0.5 mm² ... 2.5 mm²
Pollution degree
2
China RoHS
Environmentally Friendly Use Period = 50 years
ECLASS 11.0
27371601
ECLASS 7.0
27371601
ETIM 6.0
EC001437
UNSPSC 13.2
39122334

Product condition