2903347 Phoenix Contact Relays

2903347 Product Details

• Width
  16 mm
• Ambient temperature (storage/transport)
  -40 °C ... 85 °C
• Typical response time
  3 ms ... 12 ms
• Contact type
  2 changeover contacts
• Note
  FBS 2-6... plug-in bridge for the input side (A2) and FBS-2-8... plug-in bridge for the output side (11/21)
• Ambient temperature (operation)
  -40 °C ... 50 °C
• Nominal input voltage UN
  230 V AC
• Mains frequency
  50/60 Hz
• Coil voltage
  230 V AC
• Type of switch contact
  Single contact
• Min. switching current
  10 mA (At 5 V)
• Operating mode
  100% operating factor
• Mounting position
  any
• Connection method
  Screw connection
• Conductor cross section flexible (2 conductors with same cross section)
  0.5 mm² ... 2.5 mm²
• Designation
  Corrosive gas test
• China RoHS
  Environmentally Friendly Use Period = 50 years
• ECLASS 4.0
  27371100
• ECLASS 7.0
  27371601
• UNSPSC 7.0901
  39121516
UNSPSC 18.0
39122334
UNSPSC 21.0
39122334
Conductor cross section flexible
0.5 mm² ... 4 mm²
Pollution degree
2
ECLASS 10.0.1
27371601
ECLASS 5.1
27371600
ETIM 2.0
EC001437
ETIM 6.0
EC001437
UNSPSC 19.0
39122334
Type of note
Notes on operation
Height
89 mm
Degree of protection
IP20 (Relay base)
Typical release time range
3 ms ... 20 ms
Operating voltage display
Yellow LED
Maximum switching voltage
250 V AC/DC
Switching capacity
2 A (at 24 V, DC13)
Limiting continuous current
8 A (see diagram)
Test voltage
4 kVrms (50 Hz, 1 min., winding/contact)
Assembly instructions
In rows with zero spacing
Conductor cross section solid
0.5 mm² ... 4 mm²
Torque
0.5 Nm ... 0.6 Nm
Insulation
Safe isolation, basic insulation, and 4 kV rated surge voltage between all changeover contacts.
ECLASS 4.1
27371100
ECLASS 6.0
27371600
ECLASS 9.0
27371601
UNSPSC 6.01
30211917
UNSPSC 12.01
39121516
Utilization restriction
EMC: class A product, see manufacturer's declaration in the download area
Depth
75 mm
Input voltage range in reference to UN
see diagram
Typical input current at UN
6 mA
Protective circuit
Varistor
Contact material
AgNi
ECLASS 5.0
27371600
Interrupting rating (ohmic load) max.
192 W (at 24 V DC)
Mechanical service life
approx. 107 cycles
Service life, electrical
see diagram
Stripping length
8 mm
Conductor cross section AWG
20 ... 10 (solid)
Rated surge voltage
6 kV
Identification
ISA-S71.04. G3 Harsh Group
ECLASS 11.0
27371601
ETIM 4.0
EC001437
UNSPSC 11
39121516
UNSPSC 20.0
39122334
Minimum switching voltage
5 V (at 10 mA)
Maximum inrush current
12 A (20 ms, N/O contacts)
Flammability rating according to UL 94
V2 (Housing)
Connection name
Contact side
Conductor cross-section solid (2 conductors with same cross section)
0.5 mm² ... 2.5 mm²
Standards/regulations
DIN EN 50178
Overvoltage category
III
ETIM 3.0
EC001437
ETIM 7.0
EC001437
UNSPSC 13.2
39122334

Product condition