Welcome to Quotebeam
Nikki Gonzales
Bryan Obida
Nick Goetz

We are online

Monday - Friday 6AM - 6PM PST

2903346 Phoenix Contact Relays

Phoenix Contact 2903346 Pre-assembled relay module with screw connection, consisting of: relay base, multi-layer contact relay, plug-in display/interference suppression module, and retaining bracket. Contact type: 2 changeover contacts. Input voltage: 24 V DCRIF-1... relay base,
Phoenix Contact

Part#:2903346

Manufacturer:Phoenix Contact

Product Lifecycle:Active

Checking verified in-stock parts...

About the product: Pre-assembled relay module with screw connection, consisting of: relay base, multi-layer contact relay, plug-in display/interference suppression module, and retaining bracket. Contact type: 2 changeover contacts. Input voltage: 24 V DCRIF-1... relay base,

About the manufacturer: Phoenix Contact develops and manufactures industrial electrical and electronic technology products that power, protect, connect and automate systems and equipment.

Check out the 2903346 Phoenix Contact price in the box on the right side or send a quick quote.

2903346 Product Details

  • Width
    16 mm
  • Ambient temperature (storage/transport)
    -40 °C ... 85 °C
  • Nominal input voltage UN
    24 V DC
  • Typical input current at UN
    18 mA
  • Utilization restriction
    EMC: class A product, see manufacturer's declaration in the download area
  • Height
    89 mm
  • Degree of protection
    IP20 (Relay base)
  • Coil voltage
    24 V DC
  • Note
    the following values are applicable if a gold layer is destroyed
  • Ambient temperature (operation)
    -40 °C ... 70 °C
  • Typical response time
    8 ms
  • Power dissipation for nominal condition
    0.43 W
  • Contact material
    AgNi
  • Limiting continuous current
    25 A (20 ms, N/O contacts)
  • Test voltage
    4 kVrms (50 Hz, 1 min., winding/contact)
  • Flammability rating according to UL 94
    V2 (Housing)
  • Stripping length
    8 mm
  • Conductor cross section AWG
    20 ... 10 (solid)
  • Rated surge voltage
    6 kV
  • Identification
    ISA-S71.04. G3 Harsh Group
  • ECLASS 11.0
    27371601
  • ECLASS 5.0
    27371600
  • ETIM 3.0
    EC001437
  • UNSPSC 12.01
    39121516
  • Type of note
    Notes on operation
  • Depth
    75 mm
  • Input voltage range in reference to UN
    see diagram
  • Typical release time
    10 ms
  • Protective circuit
    Damping diode
  • Type of switch contact
    Single contact
  • Maximum switching voltage
    250 V AC/DC
  • Switching capacity
    2 A (at 24 V, DC13)
  • Service life, electrical
    see diagram
  • Assembly instructions
    In rows with zero spacing
  • Torque
    0.5 Nm ... 0.6 Nm
  • Designation
    Corrosive gas test
  • ECLASS 4.0
    27371100
  • ETIM 2.0
    EC001437
  • UNSPSC 6.01
    30211917
  • ETIM 7.0
    EC001437
  • UNSPSC 19.0
    39122334
  • Maximum inrush current
    50 mA
  • Operating mode
    100% operating factor
  • Mounting position
    any
  • Conductor cross-section solid (2 conductors with same cross section)
    0.5 mm² ... 2.5 mm²
  • Pollution degree
    2
  • China RoHS
    Environmentally Friendly Use Period = 50 years
  • ECLASS 5.1
    27371600
  • ETIM 6.0
    EC001437
  • UNSPSC 13.2
    39122334
  • UNSPSC 21.0
    39122334
  • Operating voltage display
    Yellow LED
  • Contact type
    2 changeover contacts
  • Min. switching current
    10 mA (At 5 V)
  • Mechanical service life
    approx. 3x 107 cycles
  • Connection method
    Screw connection
  • Conductor cross section solid
    0.5 mm² ... 4 mm²
  • Conductor cross section flexible (2 conductors with same cross section)
    0.5 mm² ... 2.5 mm²
  • Insulation
    Safe isolation, basic insulation, and 4 kV rated surge voltage between all changeover contacts.
  • ECLASS 4.1
    27371100
  • ECLASS 7.0
    27371601
  • ECLASS 9.0
    27371601
  • UNSPSC 7.0901
    39121516
  • UNSPSC 20.0
    39122334
  • Minimum switching voltage
    5 V (at 10 mA)
  • Interrupting rating (ohmic load) max.
    192 W (at 24 V DC)
  • Connection name
    Contact side
  • Conductor cross section flexible
    0.5 mm² ... 4 mm²
  • Standards/regulations
    DIN EN 50178
  • Overvoltage category
    III
  • ECLASS 10.0.1
    27371601
  • ECLASS 6.0
    27371600
  • ETIM 4.0
    EC001437
  • UNSPSC 11
    39121516
  • UNSPSC 18.0
    39122334

Product condition

New Factory Sealed

New Factory Sealed - New condition, never used surplus in original packaging with original factory seal.

Shipping and Delivery Worldwide

calculate cost and time at Checkout


Secure Payment Processing

with money back guarantee


1 year warranty

on all parts


Responsive Customer Support

we're here to help!

Need more details?

Feel free to chat with us or check our FAQ

Relevant products

Do you have questions?

We’re here for you ✨

We are a proud member of:

Association for High Technology Distribution LogoAssociation for Advancing Automation LogoThe International Society of Automation Logo