2903344 Phoenix Contact Relays

2903344 Product Details

• ECLASS 4.1
  27371100
• Typical release time range
  3 ms ... 20 ms
• Contact material
  AgNi
• Limiting continuous current
  12 A (20 ms, N/O contacts)
• Switching capacity
  2 A (at 24 V, DC13)
• Mechanical service life
  approx. 107 cycles
• Service life, electrical
  see diagram
• Note
  the following values are applicable if a gold layer is destroyed
• Ambient temperature (operation)
  -40 °C ... 50 °C
• Nominal input voltage UN
  120 V AC
• Input voltage range in reference to UN
  see diagram
• Operating voltage display
  Yellow LED
• Minimum switching voltage
  5 V (at 10 mA)
• Maximum inrush current
  50 mA
• Flammability rating according to UL 94
  V2 (Housing)
• ETIM 3.0
  EC001437
• Utilization restriction
  EMC: class A product, see manufacturer's declaration in the download area
• Height
  89 mm
• Depth
  75 mm
• Mains frequency
  50/60 Hz
Typical input current at UN
8 mA
Coil voltage
120 V AC
Contact type
2 changeover contacts
Maximum switching voltage
250 V AC/DC
Interrupting rating (ohmic load) max.
192 W (at 24 V DC)
Connection name
Contact side
Conductor cross section AWG
20 ... 10 (solid)
Insulation
Safe isolation, basic insulation, and 4 kV rated surge voltage between all changeover contacts.
China RoHS
Environmentally Friendly Use Period = 50 years
ECLASS 4.0
27371100
ECLASS 6.0
27371600
ETIM 2.0
EC001437
UNSPSC 6.01
30211917
UNSPSC 19.0
39122334
Type of note
Notes on operation
Width
16 mm
Ambient temperature (storage/transport)
-40 °C ... 85 °C
Degree of protection
IP20 (Relay base)
Typical response time
3 ms ... 12 ms
Protective circuit
Varistor
Type of switch contact
Single contact
Min. switching current
10 mA (At 5 V)
Test voltage
4 kVrms (50 Hz, 1 min., winding/contact)
Operating mode
100% operating factor
Mounting position
any
Connection method
Screw connection
Conductor cross section flexible
0.5 mm² ... 4 mm²
Rated surge voltage
6 kV
Designation
Corrosive gas test
Identification
ISA-S71.04. G3 Harsh Group
ECLASS 5.1
27371600
ETIM 4.0
EC001437
UNSPSC 12.01
39121516
UNSPSC 20.0
39122334
Assembly instructions
In rows with zero spacing
Stripping length
8 mm
Conductor cross section flexible (2 conductors with same cross section)
0.5 mm² ... 2.5 mm²
Standards/regulations
DIN EN 50178
Pollution degree
2
ECLASS 11.0
27371601
ECLASS 9.0
27371601
ETIM 6.0
EC001437
UNSPSC 7.0901
39121516
UNSPSC 18.0
39122334
Conductor cross section solid
0.5 mm² ... 4 mm²
Conductor cross-section solid (2 conductors with same cross section)
0.5 mm² ... 2.5 mm²
Torque
0.5 Nm ... 0.6 Nm
Overvoltage category
III
ECLASS 10.0.1
27371601
ECLASS 5.0
27371600
ECLASS 7.0
27371601
ETIM 7.0
EC001437
UNSPSC 13.2
39122334
UNSPSC 11
39121516
UNSPSC 21.0
39122334

Product condition