Welcome to Quotebeam
Nikki Gonzales
Bryan Obida
Nick Goetz

Live support:

Monday - Friday 6AM - 6PM PST

2903328 Phoenix Contact Relays

Phoenix Contact 2903328 Pre-assembled relay module with Push-in connection, consisting of: relay base, multi-layer contact relay, plug-in display/interference suppression module, and retaining bracket. Contact type: 2 changeover contacts. Input voltage: 120 V ACRelay base RIF-1.
Phoenix Contact

Part#:2903328

Manufacturer:Phoenix Contact

Product Lifecycle:Active

Checking verified in-stock parts...

About the product: Pre-assembled relay module with Push-in connection, consisting of: relay base, multi-layer contact relay, plug-in display/interference suppression module, and retaining bracket. Contact type: 2 changeover contacts. Input voltage: 120 V ACRelay base RIF-1.

About the manufacturer: Phoenix Contact develops and manufactures industrial electrical and electronic technology products that power, protect, connect and automate systems and equipment.

Check out the 2903328 Phoenix Contact price in the box on the right side or send a quick quote.

2903328 Product Details

  • Width
    16 mm
  • Degree of protection
    IP20 (Relay base)
  • Mains frequency
    50/60 Hz
  • Note
    the following values are applicable if a gold layer is destroyed
  • Ambient temperature (operation)
    -40 °C ... 50 °C
  • Typical response time
    3 ms ... 12 ms
  • Protective circuit
    Varistor
  • Type of switch contact
    Single contact
  • Switching capacity
    2 A (at 24 V, DC13)
  • Service life, electrical
    see diagram
  • Connection name
    Contact side
  • Conductor cross section flexible
    0.14 mm² ... 1.5 mm²
  • Overvoltage category
    III
  • China RoHS
    Environmentally Friendly Use Period = 50 years
  • ECLASS 4.1
    27371100
  • ECLASS 6.0
    27371600
  • ETIM 7.0
    EC001437
  • UNSPSC 13.2
    39122334
  • UNSPSC 21.0
    39122334
  • Type of note
    Notes on operation
  • Height
    93 mm
  • Input voltage range in reference to UN
    see diagram
  • Typical release time range
    3 ms ... 20 ms
  • Operating voltage display
    Yellow LED
  • Power dissipation for nominal condition
    0.96 W
  • Test voltage
    2.5 kVrms (50 Hz, 1 min., winding/contact)
  • Ambient temperature (storage/transport)
    -40 °C ... 85 °C
  • Coil voltage
    120 V AC
  • Contact material
    AgNi
  • Maximum inrush current
    50 mA
  • Operating mode
    100% operating factor
  • Connection method
    Push-in connection
  • Stripping length
    8 mm
  • Identification
    ISA-S71.04. G3 Harsh Group
  • Pollution degree
    2
  • ECLASS 11.0
    27371601
  • ECLASS 5.1
    27371600
  • ECLASS 7.0
    27371601
  • ECLASS 9.0
    27371601
  • UNSPSC 11
    39121515
  • UNSPSC 12.01
    39121515
  • Utilization restriction
    EMC: class A product, see manufacturer's declaration in the download area
  • Depth
    75 mm
  • Nominal input voltage UN
    120 V AC
  • Typical input current at UN
    8 mA
  • Maximum switching voltage
    250 V AC/DC
  • Minimum switching voltage
    5 V (at 10 mA)
  • Limiting continuous current
    12 A (20 ms, N/O contacts)
  • Flammability rating according to UL 94
    V2 (Housing)
  • Mechanical service life
    approx. 107 cycles
  • Mounting position
    any
  • Rated surge voltage
    6 kV
  • Standards/regulations
    DIN EN 50178
  • Designation
    Corrosive gas test
  • ECLASS 4.0
    27371100
  • ETIM 2.0
    EC001437
  • ETIM 4.0
    EC001437
  • UNSPSC 6.01
    30211916
  • UNSPSC 18.0
    39122334
  • UNSPSC 19.0
    39122334
  • Contact type
    2 changeover contacts
  • Min. switching current
    10 mA (At 5 V)
  • Interrupting rating (ohmic load) max.
    192 W (at 24 V DC)
  • Assembly instructions
    In rows with zero spacing
  • Conductor cross section solid
    0.14 mm² ... 1.5 mm²
  • Conductor cross section AWG
    26 ... 16 (solid)
  • Insulation
    Safe isolation, basic insulation, and 4 kV rated surge voltage between all changeover contacts.
  • ECLASS 10.0.1
    27371601
  • ECLASS 5.0
    27371600
  • ETIM 3.0
    EC001437
  • ETIM 6.0
    EC001437
  • UNSPSC 7.0901
    39121515
  • UNSPSC 20.0
    39122334

Product condition

New Factory Sealed

New Factory Sealed - New condition, never used surplus in original packaging with original factory seal.

Shipping and Delivery Worldwide

calculate cost and time at Checkout


Secure Payment Processing

with money back guarantee


1 year warranty

on all parts


Responsive Customer Support

we're here to help!

Need more details?

Feel free to chat with us or check our FAQ

Relevant products

Do you have questions?

We’re here for you ✨

We are a proud member of:

Association for High Technology Distribution LogoAssociation for Advancing Automation LogoThe International Society of Automation Logo