Welcome to Quotebeam
Nikki Gonzales
Bryan Obida
Nick Goetz

Live support:

Monday - Friday 6AM - 6PM PST

2903319 Phoenix Contact Relays

Phoenix Contact 2903319 Pre-assembled relay module with screw connection, consisting of: relay base, power contact relay, and retaining bracket. Contact type: 4 changeover contacts. Input voltage: 125 V DCRIF-2... relay base, for industrial relay with 2 or 4 changeover contacts,
Phoenix Contact

Part#:2903319

Manufacturer:Phoenix Contact

Product Lifecycle:Active

Checking verified in-stock parts...

About the product: Pre-assembled relay module with screw connection, consisting of: relay base, power contact relay, and retaining bracket. Contact type: 4 changeover contacts. Input voltage: 125 V DCRIF-2... relay base, for industrial relay with 2 or 4 changeover contacts,

About the manufacturer: Phoenix Contact develops and manufactures industrial electrical and electronic technology products that power, protect, connect and automate systems and equipment.

Check out the 2903319 Phoenix Contact price in the box on the right side or send a quick quote.

2903319 Product Details

  • Depth
    75 mm
  • Degree of protection
    IP20 (Relay base)
  • Input voltage range in reference to UN
    see diagram
  • Contact type
    4 changeover contacts
  • Height
    89 mm
  • Nominal input voltage UN
    125 V DC
  • Type of switch contact
    Single contact
  • Interrupting rating (ohmic load) max.
    144 W (at 24 V DC)
  • Flammability rating according to UL 94
    V2 (Housing)
  • Mounting position
    any
  • Stripping length
    8 mm
  • Conductor cross section flexible (2 conductors with same cross section)
    0.5 mm² ... 2.5 mm²
  • Rated surge voltage
    2.5 kV
  • Overvoltage category
    II
  • Designation
    Corrosive gas test
  • ECLASS 4.0
    27371100
  • ECLASS 5.1
    27371600
  • ETIM 2.0
    EC001437
  • ETIM 3.0
    EC001437
  • UNSPSC 13.2
    39122334
  • UNSPSC 20.0
    39122334
  • Ambient temperature (operation)
    -40 °C ... 60 °C
  • Typical input current at UN
    7.5 mA
  • Protective circuit
    Damping diode
  • Contact material
    AgNi
  • Minimum switching voltage
    5 V (At 24 mA)
  • Width
    27 mm
  • Typical response time
    13 ms
  • Typical release time
    14 ms
  • Coil voltage
    125 V DC
  • Min. switching current
    5 mA (at 24 V)
  • Limiting continuous current
    6 A (see diagram)
  • Mechanical service life
    approx. 2x 107 cycles
  • Connection method
    Screw connection
  • Conductor cross section flexible
    0.5 mm² ... 4 mm²
  • Standards/regulations
    DIN EN 50178
  • Insulation
    Basic insulation
  • ETIM 6.0
    EC001437
  • UNSPSC 6.01
    30211916
  • UNSPSC 11
    39121515
  • UNSPSC 21.0
    39122334
  • Utilization restriction
    EMC: class A product, see manufacturer's declaration in the download area
  • Ambient temperature (storage/transport)
    -40 °C ... 85 °C
  • Operating voltage display
    Yellow LED
  • Maximum switching voltage
    250 V AC/DC
  • Switching capacity
    2 A (at 24 V, DC13)
  • Operating mode
    100% operating factor
  • Assembly instructions
    In rows with zero spacing
  • Conductor cross-section solid (2 conductors with same cross section)
    0.5 mm² ... 2.5 mm²
  • Torque
    0.5 Nm ... 0.6 Nm
  • Rated insulation voltage
    250 V AC
  • Identification
    ISA-S71.04. G3 Harsh Group
  • ECLASS 5.0
    27371600
  • ECLASS 9.0
    27371601
  • ETIM 7.0
    EC001437
  • UNSPSC 12.01
    39121515
  • UNSPSC 18.0
    39122334
  • Maximum inrush current
    16 A (20 ms, N/O contacts)
  • Test voltage
    2.5 kVrms (50 Hz, 1 min., winding/contact)
  • Connection name
    Contact side
  • Conductor cross section solid
    0.5 mm² ... 4 mm²
  • Conductor cross section AWG
    20 ... 10 (solid)
  • Pollution degree
    2
  • ECLASS 10.0.1
    27371601
  • ECLASS 11.0
    27371601
  • ECLASS 7.0
    27371601
  • ETIM 4.0
    EC001437
  • UNSPSC 7.0901
    39121515
  • UNSPSC 19.0
    39122334
  • ECLASS 6.0
    27371600
  • China RoHS
    Environmentally friendly use period: unlimited = EFUP-e
  • ECLASS 4.1
    27371100

Product condition

New Factory Sealed

New Factory Sealed - New condition, never used surplus in original packaging with original factory seal.

Shipping and Delivery Worldwide

calculate cost and time at Checkout


Secure Payment Processing

with money back guarantee


1 year warranty

on all parts


Responsive Customer Support

we're here to help!

Need more details?

Feel free to chat with us or check our FAQ

Relevant products

Do you have questions?

We’re here for you ✨

We are a proud member of:

Association for High Technology Distribution LogoAssociation for Advancing Automation LogoThe International Society of Automation Logo