2903001 Phoenix Contact AC/DC Power Supplies

2903001 Product Details

• Nominal input voltage range
  100 V AC ... 240 V AC
• Input fuse
  3.15 A (slow-blow, internal)
• Inrush current
  < 25 A (typical)
• Protective circuit/component
  Varistor
• Derating
  55 °C ... 70 °C (2.5%/K)
• Control deviation
  < 1 % (change in load, static 10 % ... 90 %)
• Power loss nominal load max.
  < 7 W
• MTBF (IEC 61709, SN 29500)
  > 647000 h (40 °C)
• Foot latch material
  POM (Polyoxymethylen)
• Assembly instructions
  alignable: 0 mm horizontally, 30 mm vertically
• Conductor cross section AWG min.
  24
• EMC requirements for noise emission
  EN 61000-6-3
• Standard – Electronic equipment for use in electrical power installations and their assembly into electrical power installations
  EN 50178/VDE 0160 (PELV)
• Standard – Limitation of mains harmonic currents
  EN 61000-3-2
• CSA
  CAN/CSA-C22.2 No. 60950-1-07
• Frequency range
  10 kHz ... 80 MHz
• Voltage
  10 V (Test Level 3)
• ECLASS 11.0
  27040701
• ECLASS 4.1
  27040700
• ECLASS 6.0
  27049000
ETIM 7.0
EC002540
UNSPSC 12.01
39121004
Height
90 mm
Installation distance top/bottom
30 mm / 30 mm
Ambient temperature (storage/transport)
-40 °C ... 85 °C
Degree of pollution
2
Recommended breaker for input protection
6 A ... 16 A (Characteristics B, C, D, K)
Nominal output voltage
15 V DC ±1 %
Feedback voltage resistance
< 25 V DC
Typical response time
< 1 s
Net weight
0.21 kg
Mounting position
horizontal DIN rail NS 35, EN 60715
Conductor cross section solid max.
2.5 mm²
Stripping length
8 mm
Standard - Safe isolation
DIN VDE 0100-410
Low Voltage Directive
Conformance with Low Voltage Directive 2014/35/EC
Contact discharge
6 kV (Test Level 3)
Input
2 kV (Test Level 3 - symmetrical)
Criterion A
Normal operating behavior within the specified limits.
ECLASS 5.1
27049000
ETIM 6.0
EC002540
UNSPSC 6.01
30211502
UNSPSC 20.0
39121004
Width
35 mm
Degree of protection
IP20
Max. permissible relative humidity (operation)
≤ 95 % (at 25 °C, non-condensing)
Current consumption
1.3 A (100 V AC)
Type of protection
Transient surge protection
Connection in series
yes
Residual ripple
< 50 mVPP (with nominal values)
Protection class
II (in closed control cabinet)
Conductor cross section solid min.
0.2 mm²
Conductor cross section flexible max.
2.5 mm²
Screw thread
M3
EMC requirements for noise immunity
EN 61000-6-1
Mains variation/undervoltage
EN 61000-4-11
Electrostatic discharge
EN 61000-4-2
Comments
Criterion A
Surge voltage load (surge)
EN 61000-4-5
ECLASS 10.0.1
27040701
ECLASS 5.0
27049000
ETIM 4.0
EC000599
UNSPSC 7.0901
39121004
UNSPSC 18.0
39121004
UNSPSC 21.0
39121004
Depth
84 mm
Inflammability class in acc. with UL 94 (housing / terminal blocks)
V0
Climatic class
3K3 (in acc. with EN 60721)
Frequency range (fN)
50 Hz ... 60 Hz 10 %
Mains buffering time
> 25 ms (120 V AC)
Nominal output current (IN)
3.7 A (-25 °C ... 55 °C)
Output power
55 W
Efficiency
typ. 87 % (120 V AC)
Connection method
Screw connection
Conductor cross section AWG max.
14
Standard – Safety extra-low voltage
IEC 62368-1 (SELV) und EN 60204-1 (PELV)
UL approvals
UL/C-UL listed UL 508
Electromagnetic HF field
EN 61000-4-3
Fast transients (burst)
EN 61000-4-4
Conducted interference
EN 61000-4-6
Criterion B
Temporary impairment to operational behavior that is corrected by the device itself.
ECLASS 4.0
27040700
ECLASS 9.0
27040701
UNSPSC 11
39121004
UNSPSC 13.2
39121004
Installation distance right/left
0 mm / 0 mm
Ambient temperature (operation)
-25 °C ... 70 °C (> 55 °C Derating: 2.5 %/K)
Input voltage range
85 V AC ... 264 V AC
Nominal power consumption
127.6 VA
Power factor (cos phi)
0.49
Connection in parallel
Yes, for redundancy and increased capacity
Protection against overvoltage at the output (OVP)
≤ 25 V DC
Maximum power dissipation in no-load condition
< 0.3 W
Housing material
Polycarbonate
Insulation voltage input/output
4 kV AC (type test)
Conductor cross section flexible min.
0.2 mm²
Standard - Safety of transformers
EN 61558-2-16
Standard - Electrical safety
IEC 62368-1/VDE 0805 (SELV)
Electromagnetic compatibility
Conformance with EMC Directive 2014/30/EU
Discharge in air
8 kV (Test Level 3)
Test field strength
10 V/m
Output
1 kV (Test Level 2 - symmetrical)
Voltage dips
EN 61000-4-11
China RoHS
Environmentally Friendly Use Period = 25;
ETIM 3.0
EC001039
ECLASS 7.0
27049002
UNSPSC 19.0
39121004

Product condition