2902996 Phoenix Contact AC/DC Power Supplies

2902996 Product Details

• Width
  55 mm
• Height
  90 mm
• Installation distance top/bottom
  30 mm / 30 mm
• Ambient temperature (storage/transport)
  -40 °C ... 85 °C
• Inflammability class in acc. with UL 94 (housing / terminal blocks)
  V0
• Max. permissible relative humidity (operation)
  ≤ 95 % (at 25 °C, non-condensing)
• Nominal input voltage range
  100 V AC ... 240 V AC
• Input voltage range
  85 V AC ... 264 V AC
• Nominal power consumption
  213.3 VA
• Recommended breaker for input protection
  6 A ... 16 A (Characteristics B, C, D, K)
• Nominal output current (IN)
  2.1 A (-25 °C ... 55 °C)
• Protection against overvoltage at the output (OVP)
  ≤ 60 V DC
• Output power
  100 W
• Insulation voltage input/output
  4 kV AC (type test)
• Conductor cross section solid min.
  0.2 mm²
• Stripping length
  8 mm
• Standard - Safety of transformers
  EN 61558-2-16
• Standard - Safe isolation
  DIN VDE 0100-410
• Contact discharge
  6 kV (Test Level 3)
• Electromagnetic HF field
  EN 61000-4-3
Depth
84 mm
Installation distance right/left
0 mm / 0 mm
Ambient temperature (operation)
-25 °C ... 70 °C (> 55 °C Derating: 2.5 %/K)
Degree of protection
IP20
Climatic class
3K3 (in acc. with EN 60721)
Frequency range (fN)
50 Hz ... 60 Hz 10 %
Degree of pollution
2
Mains buffering time
> 25 ms (120 V AC)
Type of protection
Transient surge protection
Nominal output voltage
48 V DC ±1 %
Control deviation
< 1 % (change in load, static 10 % ... 90 %)
Maximum power dissipation in no-load condition
< 0.4 W
Net weight
0.34 kg
Protection class
II (in closed control cabinet)
Assembly instructions
alignable: 0 mm horizontally, 30 mm vertically
Conductor cross section AWG min.
24
EMC requirements for noise immunity
EN 61000-6-1
Mains variation/undervoltage
EN 61000-4-11
Current consumption
2.2 A (100 V AC)
Input fuse
4 A (slow-blow, internal)
Protective circuit/component
Varistor
Connection in series
yes
Residual ripple
< 40 mVPP (with nominal values)
Efficiency
typ. 88 % (120 V AC)
Housing material
Polycarbonate
Conductor cross section AWG max.
14
Conductor cross section flexible max.
2.5 mm²
Standard – Electronic equipment for use in electrical power installations and their assembly into electrical power installations
EN 50178/VDE 0160 (PELV)
CSA
CAN/CSA-C22.2 No. 60950-1-07
Electrostatic discharge
EN 61000-4-2
Criterion A
Normal operating behavior within the specified limits.
Conducted interference
EN 61000-4-6
ECLASS 5.0
27049000
ETIM 3.0
EC001039
UNSPSC 7.0901
39121004
UNSPSC 18.0
39121004
Inrush current
< 40 A (typical)
Power factor (cos phi)
0.52
Derating
55 °C ... 70 °C (2.5%/K)
Feedback voltage resistance
< 60 V DC
Power loss nominal load max.
< 11 W
Mounting position
horizontal DIN rail NS 35, EN 60715
Connection method
Screw connection
Conductor cross section flexible min.
0.2 mm²
EMC requirements for noise emission
EN 61000-6-3
Standard – Limitation of mains harmonic currents
EN 61000-3-2
Low Voltage Directive
Conformance with Low Voltage Directive 2014/35/EC
Test field strength
10 V/m
Comments
Criterion A
Criterion B
Temporary impairment to operational behavior that is corrected by the device itself.
ECLASS 4.1
27040700
ECLASS 11.0
27040701
ETIM 7.0
EC002540
ETIM 6.0
EC002540
UNSPSC 20.0
39121004
Connection in parallel
Yes, for redundancy and increased capacity
Typical response time
< 1 s
MTBF (IEC 61709, SN 29500)
> 1010000 h (40 °C)
Foot latch material
POM (Polyoxymethylen)
Conductor cross section solid max.
2.5 mm²
Screw thread
M3
Standard - Electrical safety
IEC 62368-1/VDE 0805 (SELV)
Standard – Safety extra-low voltage
IEC 62368-1 (SELV) und EN 60204-1 (PELV)
UL approvals
UL/C-UL listed UL 508
Discharge in air
8 kV (Test Level 3)
Fast transients (burst)
EN 61000-4-4
Voltage dips
EN 61000-4-11
ECLASS 10.0.1
27040701
ECLASS 7.0
27049002
UNSPSC 11
39121004
UNSPSC 13.2
39121004
UNSPSC 19.0
39121004
ECLASS 4.0
27040700
ECLASS 5.1
27049000
Input
2 kV (Test Level 3 - symmetrical)
Voltage
10 V (Test Level 3)
ECLASS 9.0
27040701
UNSPSC 6.01
30211502
UNSPSC 21.0
39121004
Output
1 kV (Test Level 2 - symmetrical)
ETIM 4.0
EC000599
Surge voltage load (surge)
EN 61000-4-5
UNSPSC 12.01
39121004
Electromagnetic compatibility
Conformance with EMC Directive 2014/30/EU
Frequency range
10 kHz ... 80 MHz
China RoHS
Environmentally Friendly Use Period = 25;
ECLASS 6.0
27049000

Product condition