2902032 Phoenix Contact Electrical Measuring & Monitoring Instruments

2902032 Product Details

• Ambient temperature (operation)
  -40 °C ... 70 °C
• Number of inputs
  1
• Minimum switching voltage
  1 V DC
• Frequency output: signal
  0 Hz ... 10 kHz (via DIP switch)
• PWM output: min. load
  12 mA ≤ (UL / RL) ≤ 100 mA
• PWM output: signal
  15.6 kHz (10 bits, via DIP switch)
• Depth
  119.2 mm
• Degree of protection
  IP20 (not assessed by UL)
• Voltage input signal
  0 V ... 10 V (via DIP switch)
• Input resistance current input
  approx. 50 Ω (+0.7 V for test diode)
• Min. switching current
  100 µA
• Max. input current
  24 mA
• max. input voltage
  12 V
• Maximum switching voltage
  30 V DC
• Max. switching current
  100 mA (30 V DC)
• Overrange/underrange
  Can be set (via software)
• Conductor cross section AWG
  24 ... 12 (flexible)
• Overvoltage category
  II
• Height
  109.81 mm
• Maximum altitude
  ≤ 2000 m
Input resistance of voltage input
> 120 kΩ
Load current maximum
100 mA
Step response (0–99%)
120 ms (15 Hz sample rate)
Stripping length
10 mm
No. of channels
1
Rated insulation voltage
300 V (effective)
Permissible humidity (operation)
5 % ... 95 % (non-condensing)
Configurable/programmable
Yes
Output name
Frequency output / switching output
Frequency output: min. load
4 mA ≤ (UL / RL) ≤ 100 mA
Nominal supply voltage
24 V DC
Power consumption
≤ 350 mW (9.6 V DC)
Maximum temperature coefficient
< 0.01 %/K
DNV GL-EMC
A
Certificate
DNV GL TAA000021E
ECLASS 11.0
27210120
ECLASS 7.0
27210120
Width
6.2 mm
Typical current consumption
27 mA (12 V DC)
Conductor cross section flexible
0.14 mm² ... 2.5 mm²
Utilization restriction
EMC: class A product, see manufacturer's declaration in the download area
Ambient temperature (storage/transport)
-40 °C ... 85 °C
Current input signal
0 mA ... 20 mA (via DIP switch)
Noise immunity
EN 61000-6-2 When being exposed to interference, there may be minimal deviations.
Number of outputs
1
Fire protection for rail vehicles (DIN EN 45545-2) R22
HL 1 - HL 2
Conformance
CE-compliant
Electrical isolation
Reinforced insulation in accordance with IEC 61010-1
Temperature coefficient, typical
0.01 %/K
Electromagnetic compatibility
Conformance with EMC directive
Noise emission
EN 61000-6-4
Fire protection for rail vehicles (DIN EN 45545-2) R23
HL 1 - HL 2
Humidity
B
ECLASS 10.0.1
27210120
ECLASS 9.0
27210120
UNSPSC 12.01
39121008
Mounting position
any
DNV GL-Humidity
B
Designation
Shipbuilding approval
Temperature
B
ECLASS 4.1
27210100
ETIM 7.0
EC002653
UNSPSC 19.0
39121008
EMC
A
China RoHS
Environmentally Friendly Use Period = 50 years
ECLASS 5.0
27210100
UNSPSC 6.01
30211506
UNSPSC 11
39121008
Connection method
Push-in connection
Test voltage, input/output/supply
3 kV (50 Hz, 1 min.)
UL, USA/Canada
UL 508 Listed
Supply voltage range
9.6 V DC ... 30 V DC (The DIN rail bus connector (ME 6,2 TBUS-2 1,5/5-ST-3,81 GN, Order No. 2869728) can be used to bridge the supply voltage. It can be snapped onto a 35 mm DIN rail according to EN 60715))
Conductor cross section solid
0.2 mm² ... 2.5 mm² (with ferrule)
Degree of pollution
2
Housing material
PBT
ATEX
 II 3 G Ex nA IIC T4 Gc X
DNV GL-Vibration
A
Identification
UL 508 Listed
REACh SVHC
Lead 7439-92-1
ECLASS 4.0
27210100
ECLASS 5.1
27210100
ETIM 4.0
EC002653
UNSPSC 13.2
39121008
UNSPSC 20.0
39121008
Color
gray
Assembly instructions
The T connector can be used to bridge the supply voltage. It can be snapped onto a 35 mm DIN rail according to EN 60715.
DNV GL-Temperature
B
DNV GL-Enclosure
Required protection according to the Rules shall be provided upon installation on board
Vibration
A
Enclosure
Required protection according to the Rules shall be provided upon installation on board
ECLASS 6.0
27210100
ETIM 6.0
EC002653
UNSPSC 7.0901
39121008
UNSPSC 18.0
39121008
UNSPSC 21.0
39121008
Fire protection for rail vehicles (DIN EN 45545-2) R24
HL 1 - HL 2

Product condition