2902024 Phoenix Contact Electrical Measuring & Monitoring Instruments
Part#:2902024
Manufacturer:Phoenix Contact
Product Lifecycle:Active
Get a quick Quote!
Universally configurable 4-way signal conditioner, with switching output and plug-in connection technology for the electrical isolation of analog signals. Configurable via DIP switch or software. Screw connection technology, order configuration.
About the manufacturer: Phoenix Contact is one of the manufacturers that offers Electrical Measuring & Monitoring Instruments that you can order at Quotebeam.com. Phoenix Contact manufactures industrial electrical and electronic technology products that offer power, protection, connectivity, and automation for systems and equipment.
Check out the 2902024 Phoenix Contact price in the box on the right side or send a quick quote.
Product Details
- Input resistance of voltage input > 120 kΩ
- Voltage output signal 0 V ... 10 V (via DIP switch)
- Contact type 1 N/O contact
- Maximum switching voltage 30 V DC
- Stripping length 10 mm
- Maximum altitude ≤ 2000 m
- Voltage input signal 0 V ... 10 V (via DIP switch)
- Max. input current 24 mA
- Max. output voltage approx. 12.3 V
- Minimum switching voltage 1 V
- Power consumption ≤ 1 W (at IOUT = 20 mA, 9.6 V DC, 600 Ω load)
- Supply voltage range 9.6 V DC ... 30 V DC (The DIN rail bus connector (ME 6,2 TBUS-2 1,5/5-ST-3,81 GN, Order No. 2869728) can be used to bridge the supply voltage. It can be snapped onto a 35 mm DIN rail according to EN 60715))
- Width 6.2 mm
- Permissible humidity (operation) 5 % ... 95 % (non-condensing)
- Current input signal 0 mA ... 20 mA (via DIP switch)
- Input resistance current input approx. 50 Ω (+0.7 V for test diode)
- No. of channels 1
- Utilization restriction EMC: class A product, see manufacturer's declaration in the download area
- Depth 119.2 mm
- Degree of protection IP20 (not assessed by UL)
- Housing material PBT
- Height 109.81 mm
- Ambient temperature (operation) -40 °C ... 70 °C
- Configurable/programmable Yes
- Number of inputs 1
- max. input voltage 12 V
- Min. switching current 100 µA
- Typical current consumption 32 mA (24 V DC)
- Screw thread M3
- Overvoltage category II
- Conductor cross section flexible 0.14 mm² ... 2.5 mm²
- Temperature coefficient, typical 0.01 %/K
- Degree of pollution 2
- Designation Shipbuilding approval
- China RoHS Environmentally Friendly Use Period = 50 years
- ECLASS 4.0 27210100
- ECLASS 7.0 27210120
- UNSPSC 18.0 39121008
- Torque 0.5 Nm ... 0.6 Nm
- Maximum temperature coefficient 0.01 %/K
- Test voltage, input/output/supply 3 kV (50 Hz, 1 min.)
- ECLASS 5.1 27210100
- ETIM 6.0 EC002653
- UNSPSC 20.0 39121008
- Ripple < 20 mVPP (at 600 Ω)
- Fire protection for rail vehicles (DIN EN 45545-2) R24 HL 1 - HL 2
- ATEX II 3 G Ex nA IIC T4 Gc X
- Certificate DNV GL TAA000021E
- Enclosure Required protection according to the Rules shall be provided upon installation on board
- Mounting position any
- Typical deviation from the measuring range final value 2.8 %
- Temperature B
- REACh SVHC Lead 7439-92-1
- Load/output load voltage output ≥ 10 kΩ
- Conformance CE-compliant
- DNV GL-Temperature B
- Vibration A
- ECLASS 10.0.1 27210120
- Number of outputs 1
- Max. output current 24.6 mA
- UL, USA/Canada UL 508 Listed
- DNV GL-Vibration A
- DNV GL-Enclosure Required protection according to the Rules shall be provided upon installation on board
- Humidity B
- ECLASS 11.0 27210120
- Load/output load current output ≤ 600 Ω (at 20 mA)
- Fire protection for rail vehicles (DIN EN 45545-2) R22 HL 1 - HL 2
- Standards/regulations EN 61000-4-6
- Identification UL 508 Listed
- EMC A
- Assembly instructions The T connector can be used to bridge the supply voltage. It can be snapped onto a 35 mm DIN rail according to EN 60715.
- Ambient temperature (storage/transport) -40 °C ... 85 °C
- UNSPSC 21.0 39121008
- ECLASS 4.1 27210100
- Conductor cross section solid 0.2 mm² ... 1.5 mm² (with ferrule)
- Rated insulation voltage 300 V (effective)
- DNV GL-Humidity B
- ECLASS 6.0 27210100
- ECLASS 9.0 27210120
- Output name Switching output
- Max. switching current 100 mA (at 30 V)
- Connection method Screw connection
- Electrical isolation Reinforced insulation in accordance with IEC 61010-1
- Fire protection for rail vehicles (DIN EN 45545-2) R23 HL 1 - HL 2
- Noise immunity EN 61000-6-2 When being exposed to interference, there may be minimal deviations.
- Current output signal 0 mA ... 20 mA (via DIP switch)
- Nominal supply voltage 24 V DC
- Status display Yellow LED (switching output)
- Noise emission EN 61000-6-4
- ETIM 4.0 EC002653
- Conductor cross section AWG 24 ... 12 (flexible)
- Maximum transmission error 0.1 % (of final value)
- Electromagnetic compatibility Conformance with EMC directive
- DNV GL-EMC A
- ECLASS 5.0 27210100
- ETIM 7.0 EC002653
- UNSPSC 13.2 39121008
- Color gray
- UNSPSC 19.0 39121008
Product condition
ORIGINAL PACKAGING
SURPLUS ORIGINAL PACKAGING - 100% unused and in original packaging
1-year warranty
Get a quick Quote!
Request a quote, and we will send you price and availability within minutes.
Select Qty:
Average response time: 11 minutes
By purchasing this item, you agree to the Terms & Conditions
Quotebeam is NOT an authorized distributor of Phoenix Contact
Shipping and Delivery Worldwide
calculate costs and time
Secure Payment Processing
with money back guarantee
1 year warranty
on all parts
Responsive Customer Support
we're here to help!
Need more details?
Feel free to chat with us or check our FAQ
Phoenix Contact Disclaimer:
The product is unused surplus. Quotebeam is not an authorized surplus dealer or affiliate for the Manufacturer of this product. Products may feature older date codes or be from an earlier series than what is currently available from the manufacturer or authorized dealers. Because Quotebeam is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Phoenix Contact Controls products will have firmware already installed, Quotebeam makes no representation as to whether a Controls product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Quotebeam also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Phoenix Contact, its distributors, or any other source. Quotebeam also makes no representations as to your right to install any such firmware on the product. Quotebeam will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
Relevant products
Do you have questions?
We’re here for you ✨
We are a proud member of:
