Welcome to Quotebeam
Nikki Gonzales
Bryan Obida
Nick Goetz

We are online

Monday - Friday 6AM - 6PM PST

2902023 Phoenix Contact Electrical Measuring & Monitoring Instruments

Phoenix Contact 2902023 3-way signal conditioner with plug-in connection technology for the electrical isolation of analog signals. Input signal: 0 ... 10 V, output signal: 0 ... 20 mA, push-in connection technology
Phoenix Contact

Part#:2902023

Manufacturer:Phoenix Contact

Product Lifecycle:Active

Checking verified in-stock parts...

About the product: 3-way signal conditioner with plug-in connection technology for the electrical isolation of analog signals. Input signal: 0 ... 10 V, output signal: 0 ... 20 mA, push-in connection technology

About the manufacturer: Phoenix Contact develops and manufactures industrial electrical and electronic technology products that power, protect, connect and automate systems and equipment.

Check out the 2902023 Phoenix Contact price in the box on the right side or send a quick quote.

2902023 Product Details

  • Height
    109.81 mm
  • Ripple
    < 20 mVPP (at 600 Ω)
  • Stripping length
    10 mm
  • Conductor cross section flexible
    0.14 mm² ... 2.5 mm²
  • Temperature coefficient, typical
    0.01 %/K
  • Rated insulation voltage
    300 V (effective)
  • Color
    gray
  • Fire protection for rail vehicles (DIN EN 45545-2) R24
    HL 1 - HL 2
  • Identification
    UL 508 Listed
  • ECLASS 10.0.1
    27210120
  • ECLASS 7.0
    27210120
  • ETIM 6.0
    EC002653
  • UNSPSC 12.01
    39121004
  • Width
    6.2 mm
  • Connection method
    Push-in connection
  • Power consumption
    ≤ 800 mW (at 9.6 V DC)
  • Maximum transmission error
    0.1 % (of final value)
  • Test voltage, input/output/supply
    3 kV (50 Hz, 1 min.)
  • Electrical isolation
    Reinforced insulation in accordance with IEC 61010-1
  • Mounting position
    any
  • Designation
    Shipbuilding approval
  • Enclosure
    Required protection according to the Rules shall be provided upon installation on board
  • ECLASS 11.0
    27210120
  • ECLASS 5.1
    27210100
  • Number of outputs
    1
  • Number of inputs
    1
  • Nominal supply voltage
    24 V DC
  • Permissible humidity (operation)
    5 % ... 95 % (non-condensing)
  • Input resistance current input
    approx. 63 Ω (+0.7 V for test diode)
  • Input resistance of voltage input
    approx. 1 MΩ
  • Load/output load current output
    ≤ 600 Ω (at 20 mA)
  • Supply voltage range
    9.6 V DC ... 30 V DC (The DIN rail bus connector (ME 6,2 TBUS-2 1,5/5-ST-3,81 GN, Order No. 2869728) can be used to bridge the supply voltage. It can be snapped onto a 35 mm DIN rail according to EN 60715))
  • Typical current consumption
    25 mA (24 V DC)
  • UNSPSC 7.0901
    39121004
  • Ambient temperature (operation)
    -40 °C ... 70 °C
  • No. of channels
    1
  • Limit frequency (3 dB)
    approx. 30 Hz
  • Fire protection for rail vehicles (DIN EN 45545-2) R23
    HL 1 - HL 2
  • UNSPSC 11
    39121004
  • Ambient temperature (storage/transport)
    -40 °C ... 85 °C
  • Conductor cross section solid
    0.2 mm² ... 2.5 mm² (with ferrule)
  • Maximum temperature coefficient
    0.01 %/K
  • ETIM 4.0
    EC002653
  • Degree of protection
    IP20 (not assessed by UL)
  • Max. output current
    22 mA
  • Protective circuit
    Transient protection
  • Electromagnetic compatibility
    Conformance with EMC directive
  • ETIM 7.0
    EC002653
  • UNSPSC 20.0
    39121008
  • UNSPSC 21.0
    39121008
  • Utilization restriction
    EMC: class A product, see manufacturer's declaration in the download area
  • Depth
    119.2 mm
  • Noise immunity
    EN 61000-6-2 When being exposed to interference, there may be minimal deviations.
  • Configurable/programmable
    no
  • Conductor cross section AWG
    24 ... 12 (flexible)
  • Overvoltage category
    II
  • Degree of pollution
    2
  • Noise emission
    EN 61000-6-4
  • Step response (10-90%)
    approx. 10 ms
  • Housing material
    PBT
  • Standards/regulations
    EN 61000-4-6
  • Humidity
    B
  • Current output signal
    0 mA ... 20 mA
  • Certificate
    DNV GL TAA00002UA
  • Vibration
    A
  • Voltage input signal
    0 V ... 10 V
  • ECLASS 4.1
    27210100
  • Assembly instructions
    The T connector can be used to bridge the supply voltage. It can be snapped onto a 35 mm DIN rail according to EN 60715.
  • Fire protection for rail vehicles (DIN EN 45545-2) R22
    HL 1 - HL 2
  • Temperature
    B
  • REACh SVHC
    Lead 7439-92-1
  • China RoHS
    Environmentally Friendly Use Period = 50 years
  • ECLASS 6.0
    27210100
  • UNSPSC 6.01
    30211502
  • EMC
    A
  • ECLASS 4.0
    27210100
  • ECLASS 5.0
    27210100
  • UNSPSC 13.2
    39121008
  • UNSPSC 18.0
    39121008
  • UNSPSC 19.0
    39121008
  • ECLASS 9.0
    27210120

Product condition

New Factory Sealed

New Factory Sealed - New condition, never used surplus in original packaging with original factory seal.

Shipping and Delivery Worldwide

calculate cost and time at Checkout


Secure Payment Processing

with money back guarantee


1 year warranty

on all parts


Responsive Customer Support

we're here to help!

Need more details?

Feel free to chat with us or check our FAQ

Relevant products

Do you have questions?

We’re here for you ✨

We are a proud member of:

Association for High Technology Distribution LogoAssociation for Advancing Automation LogoThe International Society of Automation Logo