2902001 Phoenix Contact Electrical Measuring & Monitoring Instruments
Part#:2902001
Manufacturer:Phoenix Contact
Product Lifecycle:Active
Get a quick Quote!
3-way signal conditioner with plug-in connection technology for the electrical isolation of analog signals. Input signal: 0 ... 20 mA, output signal: 0 ... 10 V, push-in connection technology
About the manufacturer: Phoenix Contact is one of the manufacturers that offers Electrical Measuring & Monitoring Instruments that you can order at Quotebeam.com. Phoenix Contact manufactures industrial electrical and electronic technology products that offer power, protection, connectivity, and automation for systems and equipment.
Check out the 2902001 Phoenix Contact price in the box on the right side or send a quick quote.
Product Details
- ECLASS 9.0 27210120
- UNSPSC 11 39121004
- UNSPSC 21.0 39121008
- Utilization restriction EMC: class A product, see manufacturer's declaration in the download area
- Depth 119.2 mm
- Ambient temperature (storage/transport) -40 °C ... 85 °C
- Degree of protection IP20 (not assessed by UL)
- Number of outputs 1
- Short-circuit current < 15 mA
- Ripple < 20 mVPP (at 10 kΩ)
- Typical current consumption 25 mA (24 V DC)
- Conductor cross section solid 0.2 mm² ... 2.5 mm² (with ferrule)
- Conductor cross section flexible 0.14 mm² ... 2.5 mm²
- Maximum temperature coefficient 0.01 %/K
- Step response (10-90%) approx. 10 ms
- Overvoltage category II
- Electromagnetic compatibility Conformance with EMC directive
- Test voltage, input/output/supply 3 kV (50 Hz, 1 min.)
- Assembly instructions The T connector can be used to bridge the supply voltage. It can be snapped onto a 35 mm DIN rail according to EN 60715.
- Designation Shipbuilding approval
- Standards/regulations EN 61000-4-6
- EMC A
- REACh SVHC Lead 7439-92-1
- ECLASS 10.0.1 27210120
- ECLASS 4.1 27210100
- ETIM 4.0 EC002653
- UNSPSC 7.0901 39121004
- UNSPSC 20.0 39121008
- Width 6.2 mm
- Ambient temperature (operation) -40 °C ... 70 °C
- Noise immunity EN 61000-6-2 When being exposed to interference, there may be minimal deviations.
- Number of inputs 1
- Configurable/programmable no
- Max. output voltage 11 V
- Load/output load voltage output ≥ 10 kΩ
- Power consumption ≤ 200 mW (at 9.6 V DC)
- Connection method Push-in connection
- Conductor cross section AWG 24 ... 12 (flexible)
- Temperature coefficient, typical 0.01 %/K
- Limit frequency (3 dB) approx. 30 Hz
- Electrical isolation Reinforced insulation in accordance with IEC 61010-1
- Noise emission EN 61000-6-4
- Housing material PBT
- Mounting position any
- Fire protection for rail vehicles (DIN EN 45545-2) R24 HL 1 - HL 2
- Certificate DNV GL TAA00002UA
- Temperature B
- China RoHS Environmentally Friendly Use Period = 50 years
- ECLASS 5.0 27210100
- ECLASS 7.0 27210120
- UNSPSC 6.01 30211502
- UNSPSC 18.0 39121008
- Height 109.81 mm
- Permissible humidity (operation) 5 % ... 95 % (non-condensing)
- Current input signal 0 mA ... 20 mA
- Input resistance current input approx. 63 Ω (+0.7 V for test diode)
- Voltage output signal 0 V ... 10 V
- Nominal supply voltage 24 V DC
- Supply voltage range 9.6 V DC ... 30 V DC (The DIN rail bus connector (ME 6,2 TBUS-2 1,5/5-ST-3,81 GN, Order No. 2869728) can be used to bridge the supply voltage. It can be snapped onto a 35 mm DIN rail according to EN 60715))
- Stripping length 10 mm
- No. of channels 1
- Maximum transmission error 0.1 % (of final value)
- Protective circuit Transient protection
- Degree of pollution 2
- Rated insulation voltage 300 V (effective)
- Color gray
- Fire protection for rail vehicles (DIN EN 45545-2) R22 HL 1 - HL 2
- Fire protection for rail vehicles (DIN EN 45545-2) R23 HL 1 - HL 2
- Identification UL 508 Listed
- Vibration A
- Enclosure Required protection according to the Rules shall be provided upon installation on board
- ECLASS 4.0 27210100
- ECLASS 6.0 27210100
- ETIM 7.0 EC002653
- UNSPSC 13.2 39121008
- Humidity B
- ECLASS 11.0 27210120
- ECLASS 5.1 27210100
- ETIM 6.0 EC002653
- UNSPSC 12.01 39121004
- UNSPSC 19.0 39121008
Product condition
ORIGINAL PACKAGING
SURPLUS ORIGINAL PACKAGING - 100% unused and in original packaging
1-year warranty
Get a quick Quote!
Request a quote, and we will send you price and availability within minutes.
Select Qty:
Average response time: 11 minutes
By purchasing this item, you agree to the Terms & Conditions
Quotebeam is NOT an authorized distributor of Phoenix Contact
Shipping and Delivery Worldwide
calculate costs and time
Secure Payment Processing
with money back guarantee
1 year warranty
on all parts
Responsive Customer Support
we're here to help!
Need more details?
Feel free to chat with us or check our FAQ
Phoenix Contact Disclaimer:
The product is unused surplus. Quotebeam is not an authorized surplus dealer or affiliate for the Manufacturer of this product. Products may feature older date codes or be from an earlier series than what is currently available from the manufacturer or authorized dealers. Because Quotebeam is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Phoenix Contact Controls products will have firmware already installed, Quotebeam makes no representation as to whether a Controls product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Quotebeam also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Phoenix Contact, its distributors, or any other source. Quotebeam also makes no representations as to your right to install any such firmware on the product. Quotebeam will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
Relevant products
Do you have questions?
We’re here for you ✨
We are a proud member of:
