2901999 Phoenix Contact Electrical Measuring & Monitoring Instruments

2901999 Product Details

• Ambient temperature (operation)
  -40 °C ... 70 °C
• Configurable/programmable
  no
• Number of outputs
  1
• Current output signal
  0 mA ... 20 mA
• Supply voltage range
  9.6 V DC ... 30 V DC (The DIN rail bus connector (ME 6,2 TBUS-2 1,5/5-ST-3,81 GN, Order No. 2869728) can be used to bridge the supply voltage. It can be snapped onto a 35 mm DIN rail according to EN 60715))
• Conductor cross section flexible
  0.14 mm² ... 2.5 mm²
• Conductor cross section solid
  0.2 mm² ... 2.5 mm² (with ferrule)
• Step response (10-90%)
  approx. 10 ms
• Height
  109.81 mm
• Input resistance current input
  approx. 63 Ω (+0.7 V for test diode)
• Transmission Behavior
  1:1 to input signal
• Connection method
  Push-in connection
• Maximum temperature coefficient
  0.01 %/K
• Temperature coefficient, typical
  0.01 %/K
• Degree of pollution
  2
• Color
  gray
• Fire protection for rail vehicles (DIN EN 45545-2) R23
  HL 1 - HL 2
• Overvoltage category
  II
• Noise emission
  EN 61000-6-4
• UNSPSC 21.0
  39121008
Ripple
< 20 mVPP (at 600 Ω)
Stripping length
10 mm
Limit frequency (3 dB)
approx. 30 Hz
Electrical isolation
Reinforced insulation in accordance with IEC 61010-1
Ambient temperature (storage/transport)
-40 °C ... 85 °C
Number of inputs
1
Max. output current
22 mA
Typical current consumption
25 mA (24 V DC)
Conductor cross section AWG
24 ... 12 (flexible)
Maximum transmission error
0.1 % (of final value)
Rated insulation voltage
300 V (effective)
Test voltage, input/output/supply
3 kV (50 Hz, 1 min.)
Housing material
PBT
Designation
Shipbuilding approval
ECLASS 10.0.1
27210120
China RoHS
Environmentally Friendly Use Period = 50 years
Current input signal
0 mA ... 20 mA
Nominal supply voltage
24 V DC
Power consumption
≤ 800 mW (at 9.6 V DC)
No. of channels
1
Protective circuit
Transient protection
Electromagnetic compatibility
Conformance with EMC directive
Assembly instructions
The T connector can be used to bridge the supply voltage. It can be snapped onto a 35 mm DIN rail according to EN 60715.
Standards/regulations
EN 61000-4-6
ECLASS 4.0
27210100
ECLASS 7.0
27210120
ETIM 4.0
EC002653
Mounting position
any
Identification
UL 508 Listed
Vibration
A
REACh SVHC
Lead 7439-92-1
ECLASS 4.1
27210100
ECLASS 5.1
27210100
ETIM 7.0
EC002653
UNSPSC 6.01
30211502
UNSPSC 20.0
39121008
Fire protection for rail vehicles (DIN EN 45545-2) R22
HL 1 - HL 2
Certificate
DNV GL TAA00002UA
EMC
A
Enclosure
Required protection according to the Rules shall be provided upon installation on board
ECLASS 5.0
27210100
ECLASS 11.0
27210120
ECLASS 9.0
27210120
UNSPSC 11
39121004
UNSPSC 13.2
39121008
Load/output load current output
≤ 600 Ω (at 20 mA)
Utilization restriction
EMC: class A product, see manufacturer's declaration in the download area
Degree of protection
IP20 (not assessed by UL)
Width
6.2 mm
Permissible humidity (operation)
5 % ... 95 % (non-condensing)
Depth
119.2 mm
Noise immunity
EN 61000-6-2 When being exposed to interference, there may be minimal deviations.
Fire protection for rail vehicles (DIN EN 45545-2) R24
HL 1 - HL 2
Humidity
B
Temperature
B
UNSPSC 19.0
39121008
UNSPSC 12.01
39121004
UNSPSC 7.0901
39121004
ETIM 6.0
EC002653
ECLASS 6.0
27210100
UNSPSC 18.0
39121008

Product condition