2901425 Phoenix Contact Electrical Safety Devices

2901425 Product Details

• Depth
  114.5 mm
• Maximum altitude
  ≤ 2000 m (Above sea level)
• Typical release time
  60 ms (when controlled via A1)
• Protective circuit
  Surge protection Varistor 275 VRMS (A1-A2)
• Maximum switching voltage
  250 V AC/DC
• Inrush current, minimum
  10 mA
• Maximum interrupting rating (inductive load)
  48 W (24 V DC, τ = 40 ms)
• Switching capacity (360/h cycles)
  6 A (24 V DC)
• Nominal operating mode
  100% operating factor
• Width
  22.5 mm
• Max. permissible humidity (storage/transport)
  75 % (on average, 85% infrequently, non-condensing)
• Voltage at input/start and feedback circuit
  ~ 24 V DC
• Status display
  Green LED
• Max. permissible overall conductor resistance
  50 Ω
• Minimum switching voltage
  10 V AC/DC
• Switching capacity min.
  100 mW
• Mechanical service life
  approx. 107 cycles
• Net weight
  175.62 g
• Mounting type
  DIN rail mounting
• pluggable
  Yes
Conductor cross section flexible
0.2 mm² ... 1.5 mm²
Performance level (PL)
e
Rated insulation voltage
250 V AC
Vibration (operation)
10 Hz ... 150 Hz, 2g
ECLASS 5.0
27371900
ECLASS 9.0
27371819
UNSPSC 6.01
30211901
UNSPSC 18.0
39122205
UNSPSC 20.0
39122205
Utilization restriction
EMC: class A product, see manufacturer's declaration in the download area
Max. permissible relative humidity (operation)
75 % (on average, 85% infrequently, non-condensing)
Input voltage range in reference to UN
0.85 ... 1.1
Typ. starting time with Us
330 ms (when controlled via A1)
Operating voltage display
Green LED
Contact material
AgSnO2, + 0.2 µm Au
Limiting continuous current
6 A (N/O contact)
Interrupting rating (ohmic load) max.
144 W (24 V DC, τ = 0 ms)
Mounting position
any
Conductor cross-section flexible with ferrule and plastic sleeve
0.25 mm² ... 1.5 mm² (only together with CRIMPFOX 6)
Designation
Air clearances and creepage distances between the power circuits
Safety Integrity Level Claim Limit (SIL CL)
3
Rated surge voltage/insulation
4 kV / basic insulation (safe isolation, reinforced insulation, and 6 kV between A1-A2/logic/enabling and signaling current paths)
ECLASS 10.0.1
27371819
ECLASS 6.0
27371800
ETIM 7.0
EC001449
UNSPSC 7.0901
39121501
Height
112 mm
Ambient temperature (storage/transport)
-40 °C ... 85 °C
Input voltage range
110 V AC/DC ... 120 V AC/DC
Typical response time
40 ms (man. start)
Concurrence
∞
Maximum switching frequency
0.5 Hz
Stop category
0
Category
4
REACh SVHC
Lead 7439-92-1
ECLASS 11.0
27371819
ETIM 3.0
EC001449
UNSPSC 11
39121501
Ambient temperature (operation)
-25 °C ... 55 °C
Typical input current at UN
38 mA
Recovery time
1 s
Contact type
3 enabling current paths
Maximum inrush current
6 A
Sq. Total current
72 A2
Output fuse
10 A gL/gG NEOZED (N/O contact)
Relay type
Electromechanical relay with force-guided contacts in accordance with IEC/EN 61810-3
Degree of protection
IP20
Connection method
Push-in connection
Conductor cross section solid
0.2 mm² ... 1.5 mm²
Stripping length
8 mm
Safety Integrity Level (SIL)
3
Overvoltage category
III
China RoHS
Environmentally Friendly Use Period = 50 years
ECLASS 5.1
27371900
ECLASS 7.0
27371819
ETIM 4.0
EC001449
UNSPSC 13.2
39121501
UNSPSC 21.0
39122205
Min. degree of protection of inst. location
IP54
Conductor cross-section AWG
24 ... 16
Conductor cross-section flexible with ferrule without plastic sleeve
0.25 mm² ... 1.5 mm² (only together with CRIMPFOX 6)
Standards/regulations
DIN EN 50178/VDE 0160
Degree of pollution
2
Shock
15g
ECLASS 4.0
40020600
ECLASS 4.1
40020600
ETIM 6.0
EC001449
UNSPSC 12.01
39121501
UNSPSC 19.0
39122205

Product condition