2900456 Phoenix Contact Relays

2900456 Product Details

• Depth
  94 mm
• Input voltage range in reference to UN
  0.85 ... 1.1
• Fitting of components
  OPT-60DC/230AC/1
• Limiting continuous current
  0.75 A
• Conductor cross section flexible
  0.14 mm² ... 2.5 mm²
• Identification
  ISA-S71.04. G3 Harsh Group
• ECLASS 4.0
  27371000
• ECLASS 5.1
  27371600
• Nominal input voltage UN
  120 V AC
• Contact material
  AgSnO, hard gold-plated
• Output circuit
  2-conductor, floating
• Operating mode
  100% operating factor
• Connection name
  Output side
• Conductor cross section solid
  0.14 mm² ... 2.5 mm²
• China RoHS
  Environmentally Friendly Use Period = 50 years
• ECLASS 4.1
  27371000
• ETIM 6.0
  EC001456
• ETIM 7.0
  EC001456
• UNSPSC 20.0
  39122335
• Utilization restriction
  EMC: class A product, see manufacturer's declaration in the download area
Ambient temperature (operation)
-40 °C ... 55 °C
Status display
LED
Contact type
Single contact, 1 N/O contact
Min. switching current
1 mA (at 24 V)
Interrupting rating (ohmic load) max.
1.2 W (at 24 V DC)
Note
If the specified maximum values are exceeded, the gold plating is destroyed. The maximum values of the power contact relay are then valid. This can result in a shorter service life than with a pure power contact.
Max. load value
4.5 A2s
Mounting position
any
Stripping length
10 mm
Conductor cross section AWG
26 ... 14
ECLASS 11.0
27371603
ECLASS 6.0
27371600
ETIM 2.0
EC001456
UNSPSC 7.0901
39121516
UNSPSC 12.01
39121516
Width
6.2 mm
Ambient temperature (storage/transport)
-40 °C ... 85 °C
Compatible components
Miniature relay, REL-MR-60DC/21AU, REL-MR-60DC/21; miniature optocoupler, OPT-60DC/48DC/100, OPT-60DC/24DC/2, OPT-60DC/230AC/1
Minimum switching voltage
24 V AC
Voltage drop at max. limiting continuous current
< 1 V
Flammability rating according to UL 94
V0 (Housing)
Assembly instructions
In rows with zero spacing
Designation
Corrosive gas test
REACh SVHC
Lead 7439-92-1
ECLASS 9.0
27371603
UNSPSC 11
39121516
UNSPSC 13.2
39122326
Height
80 mm
Typical release voltage
50 V AC
Protective circuit
Bridge rectifier Bridge rectifier
Maximum switching voltage
253 V AC (Partition plate PLC-ATP must be installed for voltages larger than 250 V (L1, L2, L3) between identical terminal points in adjacent modules. Potential bridging is then carried out with FBST 8-PLC... or ...FBST 500...)
Maximum inrush current
30 A (10 ms)
Switching capacity min.
100 µW
Leakage current
< 1 mA
Phase angle cos phi min
0.5
Color
gray
Connection method
Push-in connection
Connection in acc. with standard
CUL
ECLASS 10.0.1
27371603
ECLASS 5.0
27371600
ECLASS 7.0
27371603
ETIM 4.0
EC001456
UNSPSC 19.0
39122335
ETIM 3.0
EC001456
UNSPSC 6.01
30211917
UNSPSC 18.0
39122335
UNSPSC 21.0
39122335

Product condition