2900455 Phoenix Contact Relays

2900455 Product Details

• Depth
  94 mm
• Nominal input voltage UN
  230 V AC
• Maximum switching voltage
  253 V AC (Partition plate PLC-ATP must be installed for voltages larger than 250 V (L1, L2, L3) between identical terminal points in adjacent modules. Potential bridging is then carried out with FBST 8-PLC... or ...FBST 500...)
• Limiting continuous current
  0.75 A
• Note
  If the specified maximum values are exceeded, the gold plating is destroyed. The maximum values of the power contact relay are then valid. This can result in a shorter service life than with a pure power contact.
• Leakage current
  < 1 mA
• Color
  gray
• Mounting position
  any
• Conductor cross section solid
  0.14 mm² ... 2.5 mm²
• Conductor cross section AWG
  26 ... 14
• China RoHS
  Environmentally Friendly Use Period = 50 years
• ECLASS 7.0
  27371603
• ETIM 3.0
  EC001456
• UNSPSC 6.01
  30211917
• Utilization restriction
  EMC: class A product, see manufacturer's declaration in the download area
• Input voltage range in reference to UN
  0.78 ... 1.14
• ECLASS 4.1
  27371000
• ECLASS 6.0
  27371600
• ETIM 4.0
  EC001456
• ETIM 6.0
  EC001456
UNSPSC 13.2
39122326
UNSPSC 18.0
39122335
Height
80 mm
Ambient temperature (storage/transport)
-40 °C ... 85 °C
Protective circuit
Bridge rectifier Bridge rectifier
Fitting of components
OPT-60DC/230AC/1
Minimum switching voltage
24 V AC
Interrupting rating (ohmic load) max.
1.2 W (at 24 V DC)
Voltage drop at max. limiting continuous current
< 1 V AC
Phase angle cos phi min
0.5
Assembly instructions
In rows with zero spacing
Connection name
Output side
Designation
Corrosive gas test
Identification
ISA-S71.04. G3 Harsh Group
ETIM 2.0
EC001456
UNSPSC 12.01
39121516
Width
6.2 mm
Typical release voltage
80 V AC
Compatible components
Miniature relay, REL-MR-60DC/21AU, REL-MR-60DC/21; miniature optocoupler, OPT-60DC/48DC/100, OPT-60DC/24DC/2, OPT-60DC/230AC/1
Contact material
AgSnO, hard gold-plated
Maximum inrush current
30 A (10 ms)
Switching capacity min.
100 µW
Output circuit
2-conductor, floating
Flammability rating according to UL 94
V0 (Housing)
Connection method
Push-in connection
Stripping length
10 mm
Conductor cross section flexible
0.14 mm² ... 2.5 mm²
ECLASS 11.0
27371603
ECLASS 10.0.1
27371603
ECLASS 5.1
27371600
ETIM 7.0
EC001456
UNSPSC 11
39121516
UNSPSC 20.0
39122335
Ambient temperature (operation)
-40 °C ... 55 °C
Status display
LED
Contact type
Single contact, 1 changeover contact
Min. switching current
1 mA (at 24 V)
Operating mode
100% operating factor
Max. load value
4.5 A2s
Connection in acc. with standard
CUL
REACh SVHC
Lead 7439-92-1
ECLASS 4.0
27371000
ECLASS 5.0
27371600
ECLASS 9.0
27371603
UNSPSC 7.0901
39121516
UNSPSC 19.0
39122335
UNSPSC 21.0
39122335

Product condition