2900382 Phoenix Contact Relays

2900382 Product Details

• Width
  6.2 mm
• Ambient temperature (storage/transport)
  -40 °C ... 85 °C
• ETIM 6.0
  EC001504
• UNSPSC 13.2
  39122326
• UNSPSC 21.0
  39122326
• Depth
  86 mm
• Switching threshold "0" signal in reference to UN
  ≤ 0.4
• Typical turn-off time
  0.8 ms
• Power dissipation for nominal condition
  0.07 W
• Limiting continuous current
  1 A (see derating curve)
• Mounting position
  any
• Connection name
  Output side
• Conductor cross section solid
  0.14 mm² ... 2.5 mm²
• Rated insulation voltage
  300 V
• Overvoltage category
  III
• ECLASS 4.0
  27371100
• ECLASS 5.0
  27371000
• ECLASS 7.0
  27371604
• ETIM 7.0
  EC001504
• UNSPSC 19.0
  39122326
Height
80 mm
Nominal input voltage UN
12 V DC
Switching threshold "1" signal in reference to UN
≥ 0.8
Operating voltage display
Yellow LED
Transmission frequency
50 Hz
Voltage drop at max. limiting continuous current
< 500 mV
Flammability rating according to UL 94
V0 (Housing)
Conductor cross section flexible
0.14 mm² ... 2.5 mm²
Standards/regulations
IEC 60664
Pollution degree
2
China RoHS
Environmentally Friendly Use Period = 50 years
ECLASS 4.1
27371100
ECLASS 9.0
27371604
ETIM 4.0
EC001504
UNSPSC 11
39121542
UNSPSC 18.0
39122326
Utilization restriction
EMC: class A product, see manufacturer's declaration in the download area
Ambient temperature (operation)
-25 °C ... 60 °C
Input voltage range in reference to UN
0.8 ... 1.2
Typical input current at UN
6 mA
Type of protection
Reverse polarity protection
Designation
Corrosive gas test
Assembly instructions
In rows with zero spacing
Stripping length
8 mm
Connection in acc. with standard
CUL
Insulation
Basic insulation
REACh SVHC
Lead 7439-92-1
ECLASS 11.0
27371604
ECLASS 5.1
27371000
ETIM 3.0
EC001504
UNSPSC 7.0901
39121542
UNSPSC 20.0
39122326
Input voltage range
9.6 V DC ... 14.4 V DC
Typical response time
0.3 ms
Protective circuit/component
Polarity protection diode
Output voltage range
12 V DC ... 300 V DC (Partition plate PLC-ATP must be installed for voltages larger than 250 V (L1, L2, L3) between identical terminal points in adjacent modules. Potential bridging is then carried out with FBST 8-PLC... or ...FBST 500...)
Operating mode
100% operating factor
Connection method
Push-in connection
Conductor cross section AWG
26 ... 14
Rated surge voltage
2.5 kV
Identification
ISA-S71.04. G3 Harsh Group
ECLASS 10.0.1
27371604
ECLASS 6.0
27371600
ETIM 2.0
EC001504
UNSPSC 6.01
30211916
UNSPSC 12.01
39121542

Product condition