2900298 Phoenix Contact Relays

2900298 Product Details

• Ambient temperature (operation)
  -40 °C ... 60 °C
• UNSPSC 11
  39121515
• UNSPSC 19.0
  39122334
• UNSPSC 20.0
  39122334
• Width
  14 mm
• Ambient temperature (storage/transport)
  -40 °C ... 85 °C
• Typical response time
  8 ms
• Contact type
  1 N/O contact
• Maximum switching voltage
  250 V AC/DC (The separating plate PLC-ATP should be installed for voltages larger than 250 V (L1, L2, L3) between identical terminal blocks in adjacent modules. Potential bridging is then carried out with FBST 8-PLC... or ...FBST 500...)
• Contact material
  AgSnO2
• Interrupting rating (ohmic load) max.
  144 W (at 24 V DC)
• Switching capacity
  2 A (at 24 V, DC13)
• Note
  The system installer must ensure the touch protection of the product (at voltages > 25 V AC/60 V DC). The product is a built-in device without protection against direct contact.
• Maximum altitude
  ≤ 2000 m
• Degree of protection
  RT II (Relay)
• Power dissipation for nominal condition
  0.43 W
• Operating voltage display
  Yellow LED
• Minimum switching voltage
  12 V (at 100 mA)
• Switching capacity min.
  1200 mW
• Operating mode
  100% operating factor
Mechanical service life
3x 107 cycles
Connection method
Push-in connection
Connection in acc. with standard
CUL
Standards/regulations
EN 50178
Pollution degree
2
REACh SVHC
Lead 7439-92-1
ECLASS 7.0
27371601
ETIM 7.0
EC001437
UNSPSC 6.01
30211916
UNSPSC 7.0901
39121515
UNSPSC 13.2
39122334
Type of note
Notes on operation
Depth
94 mm
Nominal input voltage UN
24 V DC
Typical release time
10 ms
Protective circuit
Reverse polarity protection Polarity protection diode
Min. switching current
100 mA (at 12 V DC)
Limiting continuous current
6 A
Flammability rating according to UL 94
V0 (Housing)
Mounting position
any
Stripping length
8 mm
Designation
Corrosive gas test
Rated surge voltage
6 kV
ECLASS 10.0.1
27371601
ECLASS 4.1
27371000
ECLASS 6.0
27371600
ETIM 3.0
EC001437
Utilization restriction
EMC: class A product, see manufacturer's declaration in the download area
Height
80 mm
Typical input current at UN
18 mA
Coil voltage
24 V DC
Type of switch contact
Single contact
Maximum inrush current
80 A (20 ms)
Interrupting rating (ohmic load) max. bridged
240 W (for 24 V DC. The value is permissible if both connections 13, both connections 14 and both connections BB are bridged.)
Test voltage
4 kV AC (50 Hz, 1 min., winding/contact)
Connection name
Contact side
Conductor cross section solid
0.14 mm² ... 2.5 mm²
Rated insulation voltage
250 V AC
Overvoltage category
III
China RoHS
Environmentally Friendly Use Period = 50 years
ECLASS 11.0
27371601
ECLASS 5.0
27371600
ECLASS 9.0
27371601
ETIM 6.0
EC001437
ETIM 4.0
EC001437
UNSPSC 12.01
39121515
UNSPSC 18.0
39122334
UNSPSC 21.0
39122334
Assembly instructions
In rows with zero spacing
Conductor cross section AWG
26 ... 14
Conductor cross section flexible
0.14 mm² ... 2.5 mm²
Insulation
Safe isolation, reinforced insulation
Identification
ISA-S71.04. G3 Harsh Group
ECLASS 4.0
27371000
ECLASS 5.1
27371600
ETIM 2.0
EC001437

Product condition