2866983 Phoenix Contact Electrical Measuring & Monitoring Instruments

2866983 Product Details

• Installation distance right/left
  0 mm / 0 mm
• Maximum power dissipation in no-load condition
  1.5 W
• MTBF (IEC 61709, SN 29500)
  > 2789000 h (40 °C)
• Connection method
  Pluggable screw connection
• Conductor cross section flexible max.
  2.5 mm²
• Stripping length
  7 mm
• Installation distance top/bottom
  50 mm / 50 mm
• Input voltage range
  85 V AC ... 264 V AC
• Input fuse
  3.15 A (slow-blow, internal)
• Current consumption
  0.75 A (120 V AC)
• Derating
  60 °C ... 70 °C (2.5%/K)
• Nominal output current (IN)
  1.5 A (-25 °C ... 60 °C)
• Peak switching voltages nominal load
  < 20 mVPP (20 MHz)
• Ambient temperature (operation)
  -25 °C ... 70 °C (> 60 °C Derating: 2.5 %/K)
• Ambient temperature (storage/transport)
  -40 °C ... 85 °C
• Nominal input voltage range
  100 V AC ... 240 V AC
• Mains buffering time
  typ. 35 ms (120 V AC)
• Width
  35 mm
• Climatic class
  3K3 (in acc. with EN 60721)
• Inrush current
  < 15 A (0.6 A2s)
Type of protection
Transient surge protection
Connection in parallel
Yes, for redundancy and increased capacity.Maximum of 2 devices for redundancy on DIN rail connector.
Height
99 mm
Degree of protection
IP20
Max. permissible relative humidity (operation)
≤ 95 % (at 25 °C, non-condensing)
Low Voltage Directive
Conformance with Low Voltage Directive 2014/35/EC
Conducted interference
EN 61000-4-6
Surge voltage load (surge)
EN 61000-4-5
ECLASS 6.0
27049000
ETIM 3.0
EC001039
UNSPSC 7.0901
39121004
Depth
95 mm
UNSPSC 12.01
39121004
Degree of pollution
2
AC frequency range
45 Hz ... 65 Hz
Protective circuit/component
Varistor
POWER BOOST (IBoost)
2 A (-25°C ... 40°C permanent )
Feedback voltage resistance
35 V DC
Peak switching voltages idling
< 20 mVPP (20 MHz)
Net weight
0.25 kg
Conductor cross section solid min.
0.2 mm²
Standard - Electrical safety
EN 60950-1/VDE 0805 (SELV)
Nominal power consumption
90 VA
Recommended breaker for input protection
6 A ... 16 A (Characteristics B, C, D, K)
Max. capacitive load
unlimited
Output power
36 W
Nominal output voltage
24 V DC ±1 %
Typical response time
< 0.5 s
Connection in series
No
Power loss nominal load max.
6.5 W
Efficiency
> 84 % (for 230 V AC and nominal values)
Mounting position
horizontal DIN rail NS 35, EN 60715
Voltage dips
EN 61000-4-11
Operating voltage display
Green LED
ECLASS 4.1
27040700
Residual ripple
< 40 mVPP (20 MHz)
Screw thread
M3
Electromagnetic compatibility
Conformance with EMC Directive 2014/30/EU
Assembly instructions
alignable: horizontally 0 mm, vertically 50 mm
Conductor cross section flexible min.
0.2 mm²
Conductor cross section AWG max.
12
EMC requirements for noise emission
EN 61000-6-3
Standard – Safety extra-low voltage
EN 60950-1 (SELV) and EN 60204 (PELV)
Standard – Limitation of mains harmonic currents
EN 61000-3-2
ECLASS 11.0
27040701
ECLASS 5.1
27049000
ETIM 4.0
EC000599
UNSPSC 18.0
39121004
Protection against overvoltage at the output (OVP)
< 30 V DC
Protection class
II (in closed control cabinet)
Standard - Safe isolation
DIN VDE 0100-410
Rail applications
EN 50121-4
ECLASS 7.0
27049002
UNSPSC 11
39121004
ETIM 2.0
EC001039
UNSPSC 20.0
39121004
Control deviation
< 1 % (change in load, static 10 % ... 90 %)
Insulation voltage input/output
4 kV (type test)
EMC requirements for noise immunity
EN 61000-6-1
Electromagnetic HF field
EN 61000-4-3
ECLASS 10.0.1
27040701
ECLASS 4.0
27040700
UNSPSC 6.01
30211502
UNSPSC 19.0
39121004
Conductor cross section solid max.
2.5 mm²
UL approvals
UL/C-UL listed UL 508
Electrostatic discharge
EN 61000-4-2
REACh SVHC
Lead 7439-92-1
ECLASS 5.0
27049000
ETIM 6.0
EC002540
UNSPSC 13.2
39121004
ECLASS 9.0
27040701
ETIM 7.0
EC002540
UNSPSC 21.0
39121004
Conductor cross section AWG min.
24
Standard – Electronic equipment for use in electrical power installations and their assembly into electrical power installations
EN 50178/VDE 0160 (PELV)
Fast transients (burst)
EN 61000-4-4
China RoHS
Environmentally Friendly Use Period = 25;

Product condition