2866721 Phoenix Contact AC/DC Power Supplies

2866721 Product Details

• Height
  130 mm
• Width
  90 mm
• Depth
  125 mm
• Height with alternative assembly
  130 mm
• Depth with alternative assembly
  93 mm
• Degree of protection
  IP20
• Connection in series
  yes
• Feedback voltage resistance
  max. 25 V DC
• Output power
  240 W
• Typical response time
  < 1 s
• Maximum power dissipation in no-load condition
  6 W
• MTBF (IEC 61709, SN 29500)
  > 1000000 h (25 °C)
• Insulation voltage input/output
  4 kV AC (type test)
• Insulation voltage input / PE
  3.5 kV AC (type test)
• Assembly instructions
  alignable: PN ≥50%, 5 mm horizontally, 15 mm next to active components, 50 mm verticallyalignable: PN <50%, 0 mm horizontally, 40 mm vertically top, 20 mm vertically bottom
• Connection method
  Screw connection
• Conductor cross section solid max.
  6 mm²
• Conductor cross section flexible max.
  4 mm²
• Conductor cross section AWG min.
  18
• EMC requirements for noise immunity
  EN 61000-6-1
EMC requirements for noise emission
EN 61000-6-3
Standard - Electrical safety
IEC 60950-1/VDE 0805 (SELV)
Standard – Protection against shock currents, basic requirements for protective separation in electrical equipment
EN 50178
Standard – Limitation of mains harmonic currents
EN 61000-3-2
Standard - Approval for medical use
IEC 60601-1, 2 x MOOP
UL approvals
UL Listed UL 508
CSA
CAN/CSA-C22.2 No. 60950-1-07
Electrostatic discharge
EN 61000-4-2
Electromagnetic HF field
EN 61000-4-3
Frequency range
0.15 MHz ... 80 MHz
Test field strength
10 V/m (Test Level 3)
Output
1 kV (Test Level 2 - symmetrical)
Signal
1 kV (Test Level 2 - asymmetrical)
Surge voltage load (surge)
EN 61000-4-5
I/O/S
asymmetrical
Criterion A
Normal operating behavior within the specified limits.
China RoHS
Environmentally Friendly Use Period = 25;
ECLASS 11.0
27040701
ECLASS 5.0
27242200
ECLASS 5.1
27242200
ECLASS 7.0
27049002
ETIM 3.0
EC001039
ETIM 6.0
EC002540
ETIM 7.0
EC002540
UNSPSC 6.01
30211502
UNSPSC 13.2
39121004
Width with alternative assembly
122 mm
Installation distance right/left
5 mm / 5 mm
Installation distance top/bottom
50 mm / 50 mm
Ambient temperature (operation)
-25 °C ... 70 °C (> 60 °C Derating: 2.5 %/K)
Ambient temperature (storage/transport)
-40 °C ... 85 °C
Max. permissible relative humidity (operation)
95 % (at 25 °C, non-condensing)
Ambient temperature (start-up type tested)
-40 °C
Degree of pollution
2
Climatic class
3K3 (in acc. with EN 60721)
Installation height
6000 m
Input voltage range
85 V AC ... 264 V AC
Nominal input voltage range
100 V AC ... 240 V AC
Dielectric strength maximum
300 V AC
Frequency range DC
0 Hz
AC frequency range
45 Hz ... 65 Hz
Discharge current to PE
< 3.5 mA
Nominal power consumption
311 VA
Current consumption
2.4 A (120 V AC)
Inrush current
< 20 A (typical)
Input fuse
12 A (slow-blow, internal)
Recommended breaker for input protection
10 A ... 16 A (AC: Characteristics B, C, D, K)
Mains buffering time
typ. 40 ms (120 V AC)
Type of protection
Transient surge protection
Protective circuit/component
Varistor
Nominal output voltage
12 V DC ±1 %
Setting range of the output voltage (USet)
5 V DC ... 18 V DC (> 12 V DC, constant capacity restricted)
Nominal output current (IN)
20 A (-25 °C ... 60 °C)
POWER BOOST (IBoost)
26 A (-25°C ... 40°C permanent )
Selective Fuse Breaking (ISFB)
120 A (12 ms)
Connection in parallel
Yes, for redundancy and increased capacity
Derating
60 °C ... 70 °C (2.5%/K)
Protection against overvoltage at the output (OVP)
< 25 V DC
Control deviation
< 1 % (change in load, static 10 % ... 90 %)
Residual ripple
< 50 mVPP (with nominal values)
Power loss nominal load max.
29 W
Net weight
1.5 kg
Efficiency
> 90 % (for 230 V AC and nominal values)
Insulation voltage output / PE
500 V DC (routine test)
Protection class
I
Mounting position
horizontal DIN rail NS 35, EN 60715
Conductor cross section solid min.
0.2 mm²
Conductor cross section flexible min.
0.2 mm²
Conductor cross section AWG max.
10
Stripping length
7 mm
Screw thread
M3
Standard – Electronic equipment for use in electrical power installations and their assembly into electrical power installations
EN 50178/VDE 0160 (PELV)
Standard – Safety extra-low voltage
IEC 60950-1 (SELV) and EN 60204-1 (PELV)
Standard - Safe isolation
DIN VDE 0100-410
Standard - Equipment safety
GS (tested safety)
Rail applications
EN 50121-4
Electromagnetic compatibility
Conformance with EMC Directive 2014/30/EU
Low Voltage Directive
Conformance with Low Voltage Directive 2014/35/EC
Contact discharge
8 kV (Test Level 4)
Discharge in air
15 kV (Test Level 4)
Comments
Criterion A
Fast transients (burst)
EN 61000-4-4
Input
2 kV (Test Level 3 - symmetrical)
Conducted interference
EN 61000-4-6
Voltage
10 V (Test Level 3)
Criterion B
Temporary impairment to operational behavior that is corrected by the device itself.
REACh SVHC
Lead 7439-92-1
ECLASS 10.0.1
27040701
ECLASS 4.0
27040700
ECLASS 4.1
27040700
ECLASS 6.0
27049000
ETIM 2.0
EC001039
ECLASS 9.0
27040701
ETIM 4.0
EC002540
UNSPSC 7.0901
39121004
UNSPSC 11
39121004
UNSPSC 12.01
39121004
UNSPSC 20.0
39121004
UNSPSC 21.0
39121004
UNSPSC 18.0
39121004
UNSPSC 19.0
39121004

Product condition