2866187 Phoenix Contact Relays

2866187 Product Details

• Utilization restriction
  EMC: class A product, see manufacturer's declaration in the download area
• Permissible humidity (operation)
  15 % ... 85 %
• Input voltage range
  24 V DC ... 240 V DC -20 % ... +25 %
• Setting range time
  50 ms ... 10 h (10 time end ranges)
• Mechanical service life
  approx. 2x 107 cycles
• Mounting position
  any
• Nominal frequency
  48 Hz ... 400 Hz
• Conductor cross section solid
  0.5 mm² ... 2.5 mm²
• Load capacity
  Cannot carry load
• Standards/regulations
  EN 50178
• Rated insulation voltage
  300 V
• ECLASS 10.0.1
  27371605
• ECLASS 5.1
  27371700
• ECLASS 4.1
  27371100
• ETIM 7.0
  EC001439
• Depth
  113 mm
• Degree of protection
  IP40 (Housing)
• Temperature sensitivity
  ≤ 0.01 %/K
• Recovery time
  500 ms
• Status display
  Green LED (POWER)
Test voltage relay winding/relay contact
4 kV
Housing insulation material
Polyamide PA, self-extinguishing
Torque
1 Nm ... 1 Nm
Conductor cross section AWG
20 ... 14
Cable length
< 10 m
Pollution degree
2
Low Voltage Directive
Conformance with LV directive 2006/95/EC
ECLASS 7.0
27371790
ECLASS 6.0
27371700
Width
22.5 mm
Ambient temperature (storage/transport)
-25 °C ... 70 °C
Function
lp: Switched-mode beginning with the pause
Maximum switching voltage
250 V AC (in acc. with IEC 60664-1)
Output fuse
5 A (fast-blow)
Nominal power consumption
2.5 VA (1 W)
Connection method
Screw connection
Stripping length
8 mm
Connection name
Floating, basic isolation between connection and input/output/bridge Y1-Y2
Electromagnetic compatibility
Conformance with EMC Directive 2004/108/EC
Insulation
Basic insulation
China RoHS
Environmentally friendly use period: unlimited = EFUP-e
Height
90 mm
Ambient temperature (operation)
-25 °C ... 55 °C
Noise immunity
EN 61000-6-2
Contact type
2 floating changeover contacts
Interrupting rating (ohmic load) max.
750 VA (3 A/250 V AC, module aligned, ≤ 5 mm spacing)
Assembly instructions
on standard DIN rail NS 35 in accordance with EN 60715
Color
green
Conductor cross section flexible
0.5 mm² ... 2.5 mm²
Control pulse length
min. 50 ms (only with Wt function: > 7 ms)
Noise emission
EN 61000-6-4
ETIM 2.0
EC001439
ETIM 6.0
EC001439
UNSPSC 7.0901
39121519
UNSPSC 19.0
39122329
ECLASS 4.0
27371100
ECLASS 9.0
27371605
ETIM 4.0
EC001439
UNSPSC 6.01
30211920
UNSPSC 11
39121519
UNSPSC 20.0
39122329
Overvoltage category
III
ECLASS 5.0
27371700
UNSPSC 21.0
39122329
ECLASS 11.0
27371605
ETIM 3.0
EC001439
UNSPSC 12.01
39121519
UNSPSC 13.2
39122329
UNSPSC 18.0
39122329

Product condition