2727352 Phoenix Contact Programmable Logic Controllers

2727352 Product Details

• Width
  63 mm
• Permissible humidity (operation)
  10 % ... 85 % (non-condensing)
• Degree of protection
  IP20
• Designation
  Segment circuit supply (US)
• Number
  1
• Frequency range
  50 Hz ... 60 Hz
• Overspeed tripping
  ≥ 20 A (after 0.3 seconds)
• Current consumption
  max. 50 mA
• Net weight
  450 g
• Operating mode
  Process data mode with one byte
• Mounting position
  Panel mounting on horizontal DIN rail
• REACh SVHC
  Lead 7439-92-1
• Utilization restriction
  EMC: class A product, see manufacturer's declaration in the download area
• Ambient temperature (operation)
  -25 °C ... 55 °C
• Permissible humidity (storage/transport)
  10 % ... 85 % (non-condensing)
• Air pressure (storage/transport)
  70 kPa ... 106 kPa (up to 3000 m above sea level)
• Number of positions
  4
• Nominal current range
  0.2 A ... 3.6 A
• Connection technology
  COMBICON
• Note on weight specifications
  without plug
Assembly instructions
To safeguard sufficient ventilation, ensure that there is an installation clearance of a minimum of 50 cm both above and below.
Immunity to burst
Noise immunity test in accordance with EN 61000-6-2 Fast transients (burst) EN 61000-4-4/IEC 61000-4-4 Criterion B; Supply lines: 2 kV; Signal/data lines: 2 kV
Depth
109 mm
Ambient temperature (storage/transport)
-25 °C ... 85 °C
Connection method
COMBICON
Designation connection point
Terminal strip X10
Type of contact
Solid-state contact
Mounting type
DIN rail
Immunity to EF
Noise immunity test in accordance with EN 61000-6-2 Electromagnetic fields EN 61000-4-3/IEC 61000-4-3 Criterion A, field strength: 3 V/m
Interference emission
Noise emission test as per EN 61000-6-4 Radio interference properties EN 55011 Class A
ECLASS 4.1
27250300
ECLASS 6.0
27242600
UNSPSC 6.01
43172015
UNSPSC 18.0
32151602
Height
224 mm
Air pressure (operation)
70 kPa ... 106 kPa (up to 2000 m above sea level)
Note
Notes on operation Line protection for the network supply line, max. 20 A. Observe derating of the POWER-COMBICON connector
Transmission speed
500 kbps
Permissible conductor cross section
1 mm² ... 2.5 mm²
Output name
Motor output
Parameterization range
0.2 A ... 3.6 A (steps of 50/100/200 mA, via fieldbus)
Supply voltage
24 V DC (via voltage jumper)
Power consumption
max. 1.2 W (entire device)
Immunity to ESD
Noise immunity test in accordance with EN 61000-6-2 Electrostatic discharge (ESD) EN 61000-4-2/IEC 61000-4-2 6 kV contact discharge, criterion B, 8 kV air discharge, criterion B
China RoHS
Environmentally Friendly Use Period = 50 years
ECLASS 5.1
27242600
ECLASS 11.0
27242609
Transmission physics
Copper
Operating voltage
200 V AC ... 440 V AC
Max. current carrying capacity
20 A
Switching rate
Max. 30 per minute (observe derating)
Supply voltage range
19.2 V DC ... 28.8 V DC (including all tolerances, including ripple)
Diagnostics messages
Overcurrent Error message in the diagnostic code (bus) and display via the LED ERR on the module
Immunity to surge
Noise immunity test in accordance with EN 61000-6-2 Transient overvoltage (surge) EN 61000-4-5/IEC 61000-4-5 Criterion B, supply lines DC: 0.5 kV/0.5 kV (symm./asymm.), criterion B, supply lines AC: 2 kV/4 kV (symm./asymm.)
ECLASS 9.0
27242609
ETIM 6.0
EC001605
UNSPSC 7.0901
43201404
UNSPSC 13.2
32151602
Protection class
I (МЭК 61140, EN 61140, VDE 0140-1)
ECLASS 5.0
27250300
ETIM 4.0
EC001601
ETIM 7.0
EC001605
UNSPSC 19.0
32151602
UNSPSC 20.0
32151602
Immunity to conducted interference
Noise immunity test in accordance with EN 61000-6-2 Conducted interference EN 61000-4-6/IEC 61000-4-6 Criterion A, Test voltage 10 V
Mechanical tests
Vibration resistance in acc. with EN 60068-2-6/IEC 60068-2-6 2g, evaluation criterion 1
ECLASS 10.0.1
27242609
ECLASS 4.0
27250300
ECLASS 7.0
27242609
ETIM 3.0
EC001601
ETIM 2.0
EC001433
UNSPSC 11
43172015
UNSPSC 12.01
43201404
UNSPSC 21.0
32151602

Product condition