2718015 Phoenix Contact Terminal Blocks

Product Details

• Bending test conductor cross section/weight
  0.2 mm² / 0.2 kg
• Number of connections
  5
• Flammability rating according to UL 94
  V2
• Nominal voltage UN
  250 V
• Result of power-frequency withstand voltage test
  Test passed
• Insulating material
  PA
• Maximum power dissipation for nominal condition
  0.77 W (the value is multiplied when connecting multiple levels)
• Nominal current IN
  24 A
• Power frequency withstand voltage setpoint
  1.5 kV
• Bending test turns
  135
• Tractive force setpoint
  60 N
• Setpoint
  1 N
• Result of temperature-rise test
  Test passed
• Short-time current
  0.48 kA
• Temperature index of insulation material (DIN EN 60216-1 (VDE 0304-21))
  130 °C
• Calorimetric heat release NFPA 130 (ASTM E 1354)
  28 MJ/kg
• Fire protection for rail vehicles (DIN EN 45545-2) R26
  HL 1 - HL 3
• Connection method
  Screw connection
• Conductor cross section flexible, with ferrule without plastic sleeve min.
  0.25 mm²
• Cross section with insertion bridge, stranded max.
  2.5 mm²
Two conductors with the same cross section stranded, with ferrule and without plastic sleeve, minimum
0.25 mm²
Two conductors with the same cross section, flexible, with TWIN ferrules, with plastic sleeve, maximum
1 mm²
Internal cylindrical gage
A3
Ambient temperature (assembly)
-5 °C ... 70 °C
ECLASS 5.0
27141100
ECLASS 7.0
27141128
ETIM 6.0
EC000900
UNSPSC 12.01
39121410
UNSPSC 19.0
39121410
Nominal cross section
2.5 mm²
Insulating material group
I
Connection in acc. with standard
CSA
Open side panel
No
Result of flexion and pull-out test
Test passed
Short circuit stability result
Test passed
Result of thermal test
Test passed
Relative insulation material temperature index (Elec.; UL 746 B)
130 °C
Specific optical density of smoke NFPA 130 (ASTM E 662)
passed
Fire protection for rail vehicles (DIN EN 45545-2) R22
HL 1 - HL 3
Width
6.2 mm
Conductor cross section flexible min.
0.2 mm²
Conductor cross section flexible, with ferrule with plastic sleeve max.
2.5 mm²
2 conductors with same cross section, stranded max.
1 mm²
Two conductors with the same cross section, flexible, with TWIN ferrules, with plastic sleeve, minimum
0.5 mm²
Tightening torque max
0.6 Nm
Permissible humidity (storage/transport)
30 % ... 70 %
ECLASS 4.0
27141100
ETIM 2.0
EC000900
ETIM 7.0
EC000900
Number of levels
4
Rated surge voltage
4 kV
Overvoltage category
III
Result of surge voltage test
Test passed
Checking the mechanical stability of terminal points (5 x conductor connection)
Test passed
Tensile test result
Test passed
Tight fit on carrier
NS 35
Requirement, voltage drop 2nd level
≤ 3.2 mV
Surface flammability NFPA 130 (ASTM E 162)
passed
Fire protection for rail vehicles (DIN EN 45545-2) R23
HL 1 - HL 3
Height NS 35/15
77.5 mm
Conductor cross section AWG min.
24
Conductor cross section flexible, with ferrule with plastic sleeve min.
0.25 mm²
2 conductors with same cross section, stranded min.
0.2 mm²
Two conductors with the same cross section stranded, with ferrule and without plastic sleeve, maximum
1 mm²
Operating temperature
-60 °C ... 105 °C (max. short-term operating temperature 130°C)
China RoHS
Environmentally Friendly Use Period = 50 years
ECLASS 11.0
27141128
ECLASS 6.0
27141100
ETIM 4.0
EC000900
UNSPSC 11
39121410
UNSPSC 18.0
39121410
UNSPSC 20.0
39121410
Color
gray
Degree of pollution
3
Maximum load current
26 A (with a 2.5 mm² conductor cross section)
Surge voltage test setpoint
4.8 kV
Bending test rotation speed
10 rpm
Conductor cross section tensile test
4 mm²
Result of voltage-drop test
Test passed
Proof of thermal characteristics (needle flame) effective duration
30 s
Smoke gas toxicity NFPA 130 (SMP 800C)
passed
Height NS 35/7,5
70 mm
Conductor cross section solid max.
4 mm²
Conductor cross section AWG max.
12
Cross section with insertion bridge, solid max.
4 mm²
2 conductors with same cross section, solid max.
1 mm²
Screw thread
M3
Ambient temperature (storage/transport)
-25 °C ... 60 °C (for a short time, not exceeding 24 h, -60 °C to +70 °C)
ECLASS 10.0.1
27141128
ECLASS 5.1
27141100
ETIM 3.0
EC000900
UNSPSC 6.01
30211811
UNSPSC 13.2
39121410
Result of tight fit on support
Test passed
Requirements, voltage drop
≤ 3.2 mV
Conductor cross section short circuit testing
4 mm²
Static insulating material application in cold
-60 °C
Fire protection for rail vehicles (DIN EN 45545-2) R24
HL 1 - HL 3
Length
62.5 mm
Conductor cross section solid min.
0.2 mm²
Conductor cross section flexible max.
2.5 mm²
Conductor cross section flexible, with ferrule without plastic sleeve max.
2.5 mm²
2 conductors with same cross section, solid min.
0.2 mm²
Stripping length
8 mm
Tightening torque, min
0.5 Nm
Ambient temperature (actuation)
-5 °C ... 70 °C
ECLASS 4.1
27141100
ECLASS 9.0
27141128
UNSPSC 7.0901
39121410
UNSPSC 21.0
39121410