Welcome to Quotebeam
Nikki Gonzales
Bryan Obida
Nick Goetz

We are online

Monday - Friday 6AM - 6PM PST

2708397 Phoenix Contact Data & Networking Devices

Phoenix Contact 2708397 FO converter with integrated optical diagnostics, alarm contact, for RS-422/RS-485 4-wire/INTERBUS up to 2 Mbps, T-coupler with two FO interfaces (BFOC), 850 nm, for PCF/fiberglass cable (multimode)
Phoenix Contact

Part#:2708397

Manufacturer:Phoenix Contact

Product Lifecycle:Active

Checking verified in-stock parts...

About the product: FO converter with integrated optical diagnostics, alarm contact, for RS-422/RS-485 4-wire/INTERBUS up to 2 Mbps, T-coupler with two FO interfaces (BFOC), 850 nm, for PCF/fiberglass cable (multimode)

About the manufacturer: Phoenix Contact develops and manufactures industrial electrical and electronic technology products that power, protect, connect and automate systems and equipment.

Check out the 2708397 Phoenix Contact price in the box on the right side or send a quick quote.

2708397 Product Details

  • Color
    green
  • Depth
    103 mm
  • Permissible humidity (operation)
    30 % ... 95 % (non-condensing)
  • Max. current consumption
    130 mA
  • Degree of protection
    IP20
  • Conductor cross section flexible min.
    0.2 mm²
  • REACh SVHC
    Lead 7439-92-1
  • ECLASS 4.0
    27230200
  • ETIM 3.0
    EC001423
  • ETIM 7.0
    EC001467
  • Net weight
    209.58 g
  • ECLASS 5.1
    27230200
  • UNSPSC 20.0
    43223323
  • Utilization restriction
    EMC: class A product, see manufacturer's declaration in the download area
  • Ambient temperature (operation)
    -20 °C ... 60 °C
  • Noise immunity
    EN 61000-6-2:2005
  • Bit distortion, output
    < 6.25 %
  • Electromagnetic compatibility
    Conformance with EMC Directive 2014/30/EU
  • Supply voltage range
    18 V DC ... 30 V DC
  • Wavelength
    850 nm
  • Contact discharge
    ± 6 kV
  • UNSPSC 18.0
    43223323
  • Width
    35 mm
  • Ambient temperature (storage/transport)
    -40 °C ... 85 °C
  • Altitude
    ≤ 5000 m (For restrictions, see the manufacturer's declaration for altitude operation)
  • Test voltage data interface/power supply
    1.5 kVrms (50 Hz, 1 min.)
  • ETIM 6.0
    EC001467
  • UNSPSC 12.01
    39121008
  • Housing material
    PA 6.6-FR
  • Operating mode
    full duplex
  • UNSPSC 19.0
    43223323
  • Connection method
    B-FOC (ST®)
  • Output description
    Alarm output
  • Signal
    ± 1 kV
  • ECLASS 10.0.1
    19170132
  • ECLASS 5.0
    27230200
  • ECLASS 7.0
    19179290
  • Transmission length incl. 3 dB system reserve
    2800 m (With F-K 200/230 10 dB/km with quick mounting connector)
  • Type of test
    Shock in acc. with EN 60068-2-27/IEC 60068-2-27
  • China RoHS
    Environmentally Friendly Use Period = 50 years
  • Noise emission
    EN 55011
  • Typical current consumption
    120 mA (24 V DC)
  • Conductor cross section solid min.
    0.2 mm²
  • ECLASS 6.0
    19179200
  • ECLASS 4.1
    27230200
  • ETIM 2.0
    EC001423
  • Transmission channels
    2 (1/1) RD, TD, full duplex
  • Transmission medium
    PCF fiber
  • Serial transmission speed
    ≤ 2 Mbps
  • UNSPSC 7.0901
    39121008
  • Electrical isolation
    VCC // RS-422
  • ECLASS 9.0
    19170114
  • Mounting type
    DIN rail mounting
  • Termination resistor
    220 Ω
  • Comments
    Criterion B
  • ETIM 4.0
    EC001423
  • ECLASS 11.0
    19170411
  • UNSPSC 6.01
    30211506
  • UNSPSC 11
    39121008
  • Height
    99 mm
  • Bit distortion, input
    ± 35 % (permitted)
  • Interface 1
    RS-422 interface in acc. with ITU-T V.11, EIA/TIA-422, DIN 66348-1
  • Nominal supply voltage
    24 V DC (in acc. with UL)
  • Minimum receiver sensitivity
    -33.2 dBm
  • Transmit capacity, minimum
    -4.6 dBm (200/230 µm)
  • Transmission length
    ≤ 1000 m (depending on the data rate, with shielded, twisted data cable)
  • Conductor cross section AWG max.
    14
  • Output name
    Relay output
  • Designation
    Corrosive gas test
  • Conductor cross section flexible max.
    2.5 mm²
  • Transmission protocol
    Transparent to protocol for RS-422 interface
  • Limiting continuous current
    0.46 A
  • Test result
    15g, 11 ms period, half-sine shock pulse
  • Maximum switching voltage
    60 V DC
  • MTBF
    178 Years (Telcordia standard, 25°C temperature, 21% operating cycle (5 days a week, 8 hours a day))
  • Identification
    ISA-S71.04-1985 G3 Harsh Group A
  • Standards/regulations
    EN 55011
  • Conductor cross section solid max.
    2.5 mm²
  • Conductor cross section AWG min.
    24
  • Number of outputs
    1
  • Certificate
    PTB 06 ATEX 2042 U
  • Connection in acc. with standard
    CUL
  • UNSPSC 13.2
    43222604
  • Additional text
    Please follow the special installation instructions in the documentation!
  • UNSPSC 21.0
    43223323

Product condition

New Factory Sealed

New Factory Sealed - New condition, never used surplus in original packaging with original factory seal.

Shipping and Delivery Worldwide

calculate cost and time at Checkout


Secure Payment Processing

with money back guarantee


1 year warranty

on all parts


Responsive Customer Support

we're here to help!

Need more details?

Feel free to chat with us or check our FAQ

Relevant products

Do you have questions?

We’re here for you ✨

We are a proud member of:

Association for High Technology Distribution LogoAssociation for Advancing Automation LogoThe International Society of Automation Logo