2702902 Phoenix Contact Data & Networking Devices
Part#:2702902
Manufacturer:Phoenix Contact
Product Lifecycle:Active
In-stock parts: 1
04/19/2024
About the product: Safety relay with IO-Link for emergency stop, safety doors and light grids, up to SILCL 3, Cat. 4, PL e, 2 sensor circuits, automatic or manual, monitored start, 2 enabling current paths, 1 signal output, US = 24 V DC, pluggable Push-in terminal block
About the manufacturer: Phoenix Contact is one of the manufacturers that offers Data & Networking Devices that you can order at Quotebeam.com. Phoenix Contact manufactures industrial electrical and electronic technology products that offer power, protection, connectivity, and automation for systems and equipment.
Check out the 2702902 Phoenix Contact price in the box on the right side or send a quick quote.
2702902 Product Details
- Process data update 5 ms
- Max. permissible overall conductor resistance 150 Ω
- Cycle Time 5 ms
- Typical pickup time at US < 250 ms (when controlled via A1)
- Min. degree of protection of inst. location IP54
- Operating voltage display 1 x green, yellow, red LED
- Conductor cross-section flexible with ferrule and plastic sleeve 0.25 mm² ... 1.5 mm² (only together with CRIMPFOX 6)
- Rated surge voltage/insulation Basic insulation 4 kV between all current paths and housing
- REACh SVHC Lead 7439-92-1
- Input current range "0" signal 0 mA ... 2 mA
- Relay type Electromechanical relay with force-guided contacts in accordance with IEC/EN 61810-3
- China RoHS Environmentally Friendly Use Period = 50 years
- ECLASS 5.1 27371901
- Current max. 100 mA
- Typical response time at US < 220 ms (automatic start)
- Nominal operating mode 100% operating factor
- Housing color yellow
- Conductor cross-section flexible with ferrule without plastic sleeve 0.25 mm² ... 1.5 mm² (only together with CRIMPFOX 6)
- Performance level (PL) e (4 A DC13; 5 A AC15; 8760 switching cycles/year)
- Category 4
- Vibration (operation) 10 Hz ... 150 Hz, 2g
- ECLASS 6.0 27371819
- Input voltage range "0" signal 0 V DC ... 5 V DC
- Input voltage range 0 V DC ... 30 V DC
- ETIM 7.0 EC001449
- Number of outputs 1
- Voltage approx. 22 V DC (Us - 2 V)
- Maximum inrush current 500 mA (Δt = 1 ms at Us)
- Recovery time < 500 ms
- Assembly instructions See derating curve
- Status display 5x LED green
- Conductor cross section solid 0.2 mm² ... 1.5 mm²
- Stop category 0
- Rated insulation voltage 320 V
- ECLASS 10.0.1 27371819
- ECLASS 9.0 27371819
- Transmission speed 230 kbps (COM3)
- Sq. Total current 72 A2 (observe derating)
- Overvoltage category II
- Number of ports 1
- Typical release time at US < 20 ms (on demand via the sensor circuit)
- Mounting position vertical or horizontal
- Net weight 150.98 g
- Conductor cross section flexible 0.2 mm² ... 1.5 mm²
- Conductor cross-section AWG 24 ... 16
- Safety Integrity Level Claim Limit (SIL CL) 3
- Standards/regulations DIN EN 60947-1
- Shock 15g
- ECLASS 11.0 27371819
- Specification Version 1.1
- Output name Enabling current path
- Housing material PBT
- Degree of protection IP20
- pluggable Yes
- Stripping length 8 mm
- Degree of pollution 2
- Conformance CE-compliant
- ETIM 6.0 EC001449
- Restart time < 1 s (Boot time)
- Mounting type DIN rail mounting
- Safety Integrity Level (SIL) 3
- Width 17.5 mm
- Ambient temperature (operation) -25 °C ... 60 °C (observe derating)
- Designation Air clearances and creepage distances between the power circuits
- Rated control circuit supply voltage US 24 V DC -20 % / +25 % (provide external protection)
- Current consumption < 5 mA (typically with US at S34/24 V)
- Input voltage range "1" signal 19.2 V DC ... 30 V DC (manual start, autostart: 0 V)
- Contact material AgSnO2
- Mechanical service life 10x 106 cycles
- Depth 114.5 mm
- Max. permissible humidity (storage/transport) 75 % (on average, 85% infrequently, non-condensing)
- Power consumption at US typ. 1.44 W
- Description of the input IO-Link switching and communication cable
- Concurrence ∞
- Output description PNP
- Switching voltage min. 12 V AC/DC
- Switching capacity min. 60 mW
- Switching frequency 0.5 Hz
- Height 116.6 mm
- Ambient temperature (storage/transport) -40 °C ... 85 °C
- Rated control supply current IS typ. 60 mA
- Protective circuit Serial protection against polarity reversal Suppressor diode
- Input name C/Q
- Connection technology 3-conductor
- Port type Class A
- Output fuse 6 A gL/gG
- Utilization restriction EMC: class A product, see manufacturer's declaration in the download area
- Maximum altitude ≤ 2000 m (Above sea level)
- Filter time max. 1.5 ms (Test pulse width of low test pulses)
- Type of protection Serial protection against polarity reversal
- Protective circuit/component Suppressor diode
- Amount of process data max. 31 Byte (Input data)
- Contact type 2 enabling current paths
- Max. permissible relative humidity (operation) 75 % (on average, 85% infrequently, non-condensing)
- Inrush current min. 3 mA
- Nominal voltage for I/O supply 24 V DC -20 % / +25 % (is provided via the IO-Link interface of the IO-Link master.)
- Number of inputs 1
- Connection method Push-in connection
- Limiting continuous current 6 A
- Switching capacity according to IEC 60947-5-1 4 A (24 V (DC13))
Product condition
New Factory Sealed
New Factory Sealed - New condition, never used surplus in original packaging with original factory seal.
This item can ship within 3 days!
1-year warranty
$527.36
2702902
Stock:
1
Select Qty:
$527.36
$527.36 each
Shipping and Delivery Worldwide
calculate costs and time
Secure Payment Processing
with money back guarantee
1 year warranty
on all parts
Responsive Customer Support
we're here to help!
Need more details?
Feel free to chat with us or check our FAQ
Relevant products
Do you have questions?
We’re here for you ✨