2702885 Phoenix Contact Data & Networking Devices

2702885 Product Details

• Management
  Web-based management, SNMP
• Designation
  Corrosive gas test
• Height
  130 mm
• Utilization restriction
  Use in potentially explosive areas is not permitted in China.
• Permissible humidity (storage/transport)
  10 % ... 95 % (non-condensing)
• Degree of protection
  IP20 (Manufacturer's declaration)
• Electromagnetic compatibility
  Conformance with EMC Directive 2014/30/EU
• Degree of pollution
  2
• Supply voltage range
  10 V DC ... 30 V DC (SELV, via pluggable Push-in terminal block)
• Conductor cross section AWG min.
  26
• Interface 1
  Ethernet interface, 10/100Base-T(X) in accordance with IEEE 802.3
• Interface
  Ethernet
• Connection method
  RJ45 jack, shielded
• Auxiliary protocols
  ARP, DHCP, PING (ICMP), SNMP V1, SMTP
• Serial transmission speed
  10/100 Mbps, auto negotiation
• Depth
  126 mm
• Ambient temperature (storage/transport)
  0 °C ... 60 °C
• Electrical isolation
  VCC // FE // Ethernet
• Net weight
  222 g
• Max. current consumption
  500 mA
Typical current consumption
< 200 mA (24 V DC)
Conductor cross section flexible min.
0.14 mm²
Conductor cross section solid max.
1.50 mm²
Operating mode
Indoor use only
No. of ports
2 (SELV)
Output name
Digital output
Security functions
Supported 3DES, AES-128, -192, -256 ESP tunnel X.509v3, PSK MD5, SHA-1 RFC 3706
Voltage input signal
10 V DC ... 30 V DC
Frequency range
0.15 MHz ... 80 MHz
ECLASS 11.0
19170405
ECLASS 9.0
19170103
Width
45 mm
Ambient temperature (operation)
0 °C ... 60 °C
Permissible humidity (operation)
10 % ... 95 % (non-condensing)
Noise immunity
EN 61000-6-2
Mounting type
DIN rail mounting
Housing material
Plastic
Color
gray
Conductor cross section flexible max.
1.50 mm²
Conductor cross section solid min.
0.14 mm²
Conductor cross section AWG max.
16
Protocols supported
TCP/IP, UDP/IP, FTP, HTTP
Transmission length
100 m (shielded twisted pair)
Web-based management
yes
Number of VPN tunnels
1
Voltage output signal
10 V DC ... 30 V DC (depending on the operating voltage)
Number of inputs
1
Identification
ISA-S71.04-1985 G3 Harsh Group A
Standards/regulations
EN 61000-4-6
Signal
± 1 kV (Data line, asymmetrical)
ECLASS 6.0
19170100
ETIM 7.0
EC001478
Current output signal
≤ 50 mA (Not short-circuit proof)
Switching level "1" signal
10 V DC ... 30 V DC
Type of test
Shock in acc. with EN 60068-2-27/IEC 60068-2-27
China RoHS
Environmentally Friendly Use Period = 50 years
ECLASS 7.0
19170103
Number of outputs
1
Description of the input
Digital input
Test result
15g
Contact discharge
± 6 kV (Test Level 3)
ECLASS 5.1
19030100
ECLASS 5.0
19030100
ETIM 6.0
EC001478
Comments
Criterion B
ECLASS 10.0.1
19170405

Product condition