2702875 Phoenix Contact Data & Networking Devices
Part#:2702875
Manufacturer:Phoenix Contact
Product Lifecycle:Active
In-stock parts: 4
04/18/2024
About the product: Wireless-MUX set, two modules with 16 digital inputs and outputs and 2 analog inputs and outputs (0 - 20 mA, 0 - 10 V) each, without antennas
About the manufacturer: Phoenix Contact is one of the manufacturers that offers Data & Networking Devices that you can order at Quotebeam.com. Phoenix Contact manufactures industrial electrical and electronic technology products that offer power, protection, connectivity, and automation for systems and equipment.
Check out the 2702875 Phoenix Contact price in the box on the right side or send a quick quote.
2702875 Product Details
- Depth 57 mm
- Degree of protection IP20
- Transmission power 5 dBm
- Input name Analog inputs
- Number of inputs 2
- Protective circuit Short-circuit protection, overload protection, protected against reverse voltages
- Delay time ≤ 10 ms (Latency, typical)
- UNSPSC 6.01 20142601
- Ambient temperature (operation) -25 °C ... 60 °C
- Permissible humidity (operation) 95 % (non-condensing)
- Wireless standard Based on Bluetooth 4.0
- MTTF 1458 Years (SN 29500 standard, temperature 25°C, operating cycle 21%)
- Designation Wireless approval South Korea, KC
- Standards/regulations EN 61000-4-6
- ECLASS 4.0 27250302
- ECLASS 6.0 27242600
- Free from substances that could impair the application of coating according to P-VW 3.10.7 57 65 0 VW-AUDI-Seat central standard
- Height 123.4 mm
- Net weight 630 g
- Comments Criterion B
- REACh SVHC Lead 7439-92-1
- ECLASS 5.1 27242604
- ECLASS 11.0 27242602
- UNSPSC 11 20142601
- Diagnostics messages Short-circuit or overload of the digital outputs LED
- Permissible humidity (storage/transport) 95 %
- Air pressure (storage/transport) 66 kPa ... 108 kPa (up to 3500 m above sea level)
- Certificate MSIP-CRI-PCK-2884208
- DAC resolution 12 Bit
- Overvoltage category II
- ECLASS 10.0.1 27242602
- ECLASS 7.0 27242602
- ETIM 7.0 EC001597
- UNSPSC 12.01 20142601
- UNSPSC 18.0 32151602
- Additional text ISC directive RSS 210
- Ambient temperature (storage/transport) -25 °C ... 85 °C
- No. of channels 40
- Receiver sensitivity -95 dBm
- Supply voltage range 19.2 V DC ... 30.5 V DC (via power connector)
- Typical input current per channel 2.3 mA
- Mechanical tests Vibration resistance in acc. with EN 60068-2-6/IEC 60068-2-6 5g
- ECLASS 9.0 27242602
- UNSPSC 13.2 20142601
- UNSPSC 21.0 32151602
- Input voltage range "0" signal < 5 V
- Number of outputs 2
- Behavior with overload Auto restart
- Electromagnetic compatibility Conformance with EMC Directive 2014/30/EU
- Contact discharge ± 6 kV (Test Level 3)
- Protection class III
- ECLASS 5.0 27250600
- Width 95 mm
- Note on dimensions with connectors
- Air pressure (operation) 795 hPa ... 1080 hPa (up to 2000 m above sea level)
- Modulation type GFSK (Gaussian Frequency Shift Keying)
- Supply voltage 24 V DC
- ETIM 6.0 EC001597
- UNSPSC 19.0 32151602
- Signal ± 1 kV (Signal line, asymmetrical)
- China RoHS Environmentally Friendly Use Period = 50 years
- ECLASS 4.1 27250302
- UNSPSC 20.0 32151602
- UNSPSC 7.0901 20142601
- Frequency range 0.15 MHz ... 80 MHz
- Wireless licenses Europe, additional countries in the e-shop
- Standards/specifications RED directive 2014/53/EU EN 300328 EN 61000-6-4 EN 61000-6-2 EN 62311 EN 60950
- Identification Japan MIC (RF) ID:202-LSF002
- Connection method Spring-cage connection
- Nominal load, inductive 12 VA (1.2 H, 50 Ω)
- Voltage input signal 0 V ... 10 V
- Antenna connection method RSMA (female)
- Connection technology 1-conductor
- Nominal input voltage UIN 24 V DC
- Output current 8 A
- Input resistance of voltage input 130 kΩ
- Current output signal 0 mA ... 20 mA
- Mounting type DIN rail
- Type of protection Surge voltage
- Nominal output voltage 24 V DC
- Output current when switched off ≤ 10 µA (When not loaded, a voltage can be measured even at an output that is not set.)
- Current input signal 0 mA ... 20 mA
- Input resistance current input 50 Ω
- Current consumption 60 mA (at 24 V DC, at 25 °C)
- Input voltage range "1" signal > 15 V
- Output name Analog outputs
- Nominal load, lamp 12 W
- Behavior with inductive overload Output can be destroyed
- Reverse voltage resistance to short pulses Reverse voltage proof
- Voltage output signal 0 V ... 10 V
- Color green
- Nominal load, ohmic 12 W (48 Ω)
- Measured value resolution 12 bits
- Load/output load voltage output ≥ 2 kΩ
- Degree of pollution 2
- Load/output load current output ≤ 500 Ω
- Description of the input Single ended
- Housing material PA 6.6-FR
- Note on weight specifications one module, incl. connector, without antenna
Product condition
New Factory Sealed
New Factory Sealed - New condition, never used surplus in original packaging with original factory seal.
This item can ship within 5 days!
1-year warranty
$1,379.28
2702875
Stock:
4
Select Qty:
$1,379.28
$1,379.28 each
Shipping and Delivery Worldwide
calculate costs and time
Secure Payment Processing
with money back guarantee
1 year warranty
on all parts
Responsive Customer Support
we're here to help!
Need more details?
Feel free to chat with us or check our FAQ
Relevant products
Do you have questions?
We’re here for you ✨