2702330 Phoenix Contact Data & Networking Devices

2702330 Product Details

• Supply voltage
  24 V DC (redundant)
• Note on the connection method
  Auto negotiation and autocrossing
• Minimum receiver sensitivity
  -32 dBm
• Filter functions
  Quality of Service (8 priority classes)
• IP parameterization
  DHCP-Client
• Port security
  MAC-based, RADIUS (IEEE 802.1X)
• Permissible humidity (storage/transport)
  10 % ... 95 % (non-condensing)
• Utilization restriction
  EMC: class A product, see manufacturer's declaration in the download area
• Depth
  115 mm
• Signal LEDs
  Data receive, link status
• Maximum receiver sensitivity
  -14 dBm
• Air pressure (operation)
  79 kPa ... 108 kPa up to 2000 m above mean sea level (Without derating)
• No. of ports
  2 (SC multi-mode)
• Diagnostic functions
  RMON History
• Additional functions
  Transmission of MMS and GOOSE (IEC 61850-8-1)
• PROFINET conformance class
  Conformance-Class B
• Current consumption
  260 mA
• Conductor cross section solid min.
  0.25 mm²
• Stripping length
  9 mm
• Immunity to burst
  EN 61000-6-2 EN 61000-4-4 (EFT burst) Criterion A
Height
130 mm
Permissible humidity (operation)
10 % ... 95 % (non-condensing)
Interface
Ethernet FO
Transmit capacity, maximum
-14 dBm
Configuration memory
max. 8 GByte (SD card)
PROFINET device function
PROFINET device
Signal contact control voltage
typ. 24 V DC
Mounting type
DIN rail
Net weight
260 g
Vibration (storage/transport)
5g, 150 Hz, in acc. with IEC 60068-2-6
Free from substances that could impair the application of coating
Yes
UL, USA
UL 60079-0, Ed.6 / UL 60079-7, Ed.5
DNV GL-Temperature
B
Width
45 mm
Ambient temperature (storage/transport)
-40 °C ... 85 °C
Degree of pollution
2
Transmission physics
multi-mode fiberglass
Transmit capacity, minimum
-19 dBm
Basic functions
Store-and-forward switch, complies with IEEE 802.3
Redundancy
MRP (Media Redundancy Protocol)
Time synchronization
SNTP (Simple Network Time Protocol)
Maximum conductor length (twisted pair)
100 m
Housing material
Polycarbonate fiber reinforced
Noise emission
EN 61000-6-4
Shock
DIN EN 60068-2-27
Degree of protection
IP20
Ambient temperature (operation)
-40 °C ... 70 °C
Transmission length
11000 m (fiberglass with F-G 62.5/125 0.7 dB/km F1000)
Air pressure (storage/transport)
79 kPa ... 108 kPa up to 2000 m above mean sea level (Without derating)
Transmission speed
100 Mbps (full duplex)
Wavelength
1300 nm
Management
Web-based management (HTTP/HTTPS)
MAC address table
8k
Status and diagnostic indicators
LEDs: US1, US2 (power supply), Fail (alarm contact), 2 LEDs per Ethernet port (Link/Activity and Speed)
Residual ripple
3.6 VPP (within the permitted voltage range)
Type AX
Book type
Cascading depth
Network, linear, and star structure: any
Max. current consumption
1.5 A (US = Min, Tamb = Max, DOI = Max)
MTTF
343.16 Years (SN 29500 standard, temperature 25°C, operating cycle 21%)
Conductor cross section flexible min.
0.25 mm²
Electromagnetic compatibility
Conformance with EMC Directive 2014/30/EU
Immunity to surge
EN 61000-6-2 EN 61000-4-5 (surge) Criterion A
Vibration (operation)
in acc. with IEC 60068-2-6: 5g, 150 Hz
IECEx
Ex ec IIC T4 Gc
DNV GL-EMC
B
ETIM 3.0
EC000734
ECLASS 7.0
19170106
UNSPSC 7.0901
43201404
UNSPSC 19.0
43222612
Supply voltage range
9 V DC ... 57 V DC
Note
Support by phone or on-site (fee is charged)
Typical current consumption
255 mA (at US = 24 V DC and 25 °C ambient temperature)
Conductor cross section flexible max.
1.5 mm²
Interference emission
EN 61000-6-2 EN 61000-6-4 (interference) Class A
Conductor cross section AWG min.
24
Immunity to conducted interference
EN 61000-6-2 EN 61000-4-6 (line noise immunity) Criterion A
Conductor cross section AWG max.
16
Conducted noise emission
EN 61000-6-2 EN 61000-6-4 (conducted interference) Class A
Immunity to EF
EN 61000-6-2 EN 61000-4-3 (electromagnetic fields) Criterion A
Type of test
Free fall in accordance with EN 61131-2
DNV GL-Enclosure
Required protection according to the Rules shall be provided upon installation on board
ECLASS 10.0.1
19170401
ECLASS 11.0
19170401
ECLASS 6.0
19170100
ETIM 4.0
EC000734
ETIM 7.0
EC000734
UNSPSC 6.01
43172015
UNSPSC 20.0
43222612
Noise immunity
EN 61000-6-2
Shipbuilding approval
Tested in accordance with IEC 60945 and IACS E10
Shock (operation)
30g (EN 60068-2-27)
UL, Canada
CSA C22.2 NO.60079-0, Ed.3 / CSA C22.2 NO.60079-7:16
DNV GL-Vibration
A
China RoHS
Environmentally Friendly Use Period = 50 years
ECLASS 5.0
19030100
UNSPSC 12.01
43201410
Connection method
Push-in spring connection
UL, USA/Canada
Class I, Div. 2, Groups A, B, C, D T4Class I, Zone 2, IIC T4
Noxious gas test
ISA S71.04.2013 G3 Harsh Group A
ECLASS 4.1
27250501
ECLASS 9.0
19170106
UNSPSC 13.2
43222612
Conductor cross section solid max.
1.5 mm²
Immunity to ESD
EN 61000-6-2 EN 61000-4-2 (ESD) Criterion B
ATEX
 II 3 G Ex ec IIC T4 Gc
DNV GL-Humidity
B
REACh SVHC
Lead 7439-92-1
ECLASS 4.0
27250501
ECLASS 5.1
19030100
ETIM 6.0
EC000734
UNSPSC 11
43172015
UNSPSC 18.0
43222612
UNSPSC 21.0
43222612

Product condition