2702132 Phoenix Contact Programmable Logic Controllers

2702132 Product Details

• Mechanical tests
  Vibration resistance in acc. with EN 60068-2-6/IEC 60068-2-6 5g
• China RoHS
  Environmentally friendly use period: unlimited = EFUP-e
• ECLASS 4.0
  27250200
• ECLASS 6.0
  27242600
• ETIM 7.0
  EC001604
• UNSPSC 13.2
  32151602
• UNSPSC 20.0
  32151602
• Connection technology
  3-conductor
• Nominal input current at UIN
  typ. 3 mA
• Delay at signal change from 1 to 0
  2.9 ms
• Output name
  Digital outputs
• Output current when switched off
  max. 10 µA (When not loaded, a voltage can be measured even at an output that is not set.)
• Reverse voltage resistance to short pulses
  Reverse voltage proof
• Input voltage range "1" signal
  15 V DC ... 30 V DC
• Nominal load, lamp
  12 W
• Immunity to EF
  Noise immunity test in accordance with EN 61000-6-2 Electromagnetic fields EN 61000-4-3/IEC 61000-4-3 Criterion A, Field intensity: 10 V/m
• ECLASS 5.0
  27250200
• ETIM 3.0
  EC001604
• UNSPSC 12.01
  43201404
• Input name
  Digital inputs
Nominal input voltage UIN
24 V DC
Number of outputs
4
Nominal output voltage
24 V DC
Behavior with overload
Auto restart
Behavior with inductive overload
Output can be destroyed
Immunity to surge
Noise immunity test in accordance with EN 61000-6-2 Transient overvoltage (surge) EN 61000-4-5/IEC 61000-4-5 Criterion B, supply lines DC: 0.5 kV/0.5 kV (symmetrical/asymmetrical), fieldbus cable shield 1 kV
Interference emission
Noise emission test as per EN 61000-6-4 EN 55011 Class A
ECLASS 10.0.1
27242608
ECLASS 7.0
27242608
ECLASS 11.0
27242608
UNSPSC 7.0901
43201404
UNSPSC 11
43172015
UNSPSC 18.0
32151602
Number of inputs
8
Input voltage
24 V DC
Typical input current per channel
typ. 3 mA
ETIM 2.0
EC001434
Delay at signal change from 0 to 1
2.9 ms
Nominal load, inductive
12 VA (1.2 H, 48 Ω)
Immunity to conducted interference
Noise immunity test in accordance with EN 61000-6-2 Conducted interference EN 61000-4-6/IEC 61000-4-6 Criterion A, Test voltage 10 V
Protection class
III (IEC 61140, EN 61140, VDE 0140-1)
ECLASS 5.1
27242600
ETIM 6.0
EC001604
UNSPSC 19.0
32151602
Power consumption
typ. 1.7 W (entire device)
Protective circuit
Short-circuit and overload protection Freewheeling circuit in the output driver
Nominal load, ohmic
12 W
Limitation of the voltage induced on circuit interruption
approx. -30 V
Immunity to ESD
Noise immunity test in accordance with EN 61000-6-2 Electrostatic discharge (ESD) EN 61000-4-2/IEC 61000-4-2 Criterion B, 6 kV contact discharge, 8 kV air discharge
Immunity to burst
Noise immunity test in accordance with EN 61000-6-2 Fast transients (burst) EN 61000-4-4/IEC 61000-4-4 Criterion A, all interfaces 1 kVCriterion B, all interfaces 2 kV
REACh SVHC
Lead 7439-92-1
ECLASS 4.1
27250200
ETIM 4.0
EC001604
ECLASS 9.0
27242608
UNSPSC 6.01
43172015
Typical response time
approx. 500 µs
Input voltage range "0" signal
-30 V DC ... 5 V DC
Output voltage
24 V DC -1 V (At nominal current)
UNSPSC 21.0
32151602
Ambient temperature (operation)
-25 °C ... 55 °C
Width
80 mm
Note on dimensions
Specfications with connectors
Permissible humidity (operation)
10 % ... 95 % (non-condensing)
Air pressure (storage/transport)
70 kPa ... 106 kPa (up to 3000 m above sea level)
Conductor cross section solid min.
0.08 mm²
Stripping length
8 mm
Diagnostics messages
Short-circuit or overload of the digital outputs Yes
Number of configuration data
max. 244 Byte (including 5 bytes for the local inputs and outputs)
Supply voltage
24 V DC (via Inline connector)
Number of supported branch terminals with remote bus branch
0
Description of the input
EN 61131-2 type 1
Connection in acc. with standard
CUL
Height
119.8 mm
Permissible humidity (storage/transport)
10 % ... 95 % (according to DIN EN 61131-2)
Degree of protection
IP20
Conductor cross section AWG max.
16
Conductor cross section AWG min.
28
Net weight
339.9 g
Number of parameter data
max. 244 Byte (including 14 bytes for the bus coupler, DP/V1, and the local inputs and outputs)
Number of supported devices
max. 63 (per station)
Current consumption
min. 6 mA (without connected peripherals)
Depth
71.5 mm
Ambient temperature (storage/transport)
-40 °C ... 85 °C
Connection method
Inline connector
Conductor cross section solid max.
1.5 mm²
Conductor cross section flexible max.
1.5 mm²
Note on weight specifications
with connectors
Number of local bus devices that can be connected
max. 61 (The on-board I/Os are two devices)
Number of devices with parameter channel
max. 16
Supply voltage range
19.2 V DC ... 30 V DC (including all tolerances, including ripple)
Air pressure (operation)
70 kPa ... 106 kPa (up to 3000 m above sea level)
Designation
Segment circuit supply (US)
Conductor cross section flexible min.
0.08 mm²
Mounting type
DIN rail mounting
Color
green
Amount of process data
max. 488 Byte (per station)
Response time of I/Os
typ. 4 ms (aligned I/Os; transmission speed: PROFIBUS 1.5 Mbps, local bus 500 kbps)
Power supply unit
max. 8 A DC (sum of UM + US)

Product condition