2701686 Phoenix Contact Programmable Logic Controllers

2701686 Product Details

• Note on dimensions
  The depth is valid when a TH 35-7,5 DIN rail is used (according to EN 60715).
• Degree of protection
  IP20
• Conductor cross section AWG min.
  24
• Conductor cross section flexible max.
  1.5 mm²
• Permissible humidity (operation)
  5 % ... 95 % (non-condensing)
• Mounting position
  any (observe temperature derating)
• Transmission speed
  100 Mbps
• Device profile
  FSP_IO
• Ambient temperature (operation)
  -25 °C ... 60 °C (Mounting position: wall mounting on horizontal DIN rail)
• Designation
  Axioline F local bus supply (UBus)
• Conductor cross section flexible min.
  0.2 mm²
• Mounting type
  DIN rail mounting
• Width
  45 mm
• Ambient temperature (storage/transport)
  -40 °C ... 85 °C
• Protocol
  Sercos
• Depth
  74 mm
• Permissible humidity (storage/transport)
  5 % ... 95 % (non-condensing)
• Connection method
  Micro USB type B
• Conductor cross section solid max.
  1.5 mm²
• Stripping length
  8 mm
ETIM 4.0
EC001604
UNSPSC 6.01
43172015
UNSPSC 12.01
39121311
Net weight
177 g
Number of interfaces
1
Specification
Sercos specification 1.31
Current consumption
max. 570 mA (with 2 A at UBus for the I/Os and UL = 24 V)
Immunity to burst
Noise immunity test in accordance with EN 61000-6-2 Fast transients (burst) EN 61000-4-4/IEC 61000-4-4 Criterion B, 2 kV
Protection class
III (IEC 61140, EN 61140, VDE 0140-1)
ECLASS 10.0.1
27242608
ECLASS 6.0
27242600
Height
126.1 mm
Air pressure (operation)
70 kPa ... 106 kPa (up to 3000 m above sea level)
Note on the connection method
Auto negotiation and autocrossing
Conductor cross section AWG max.
16
Degree of pollution
2 (IEC 60664-1, EN 60664-1)
Transmission physics
Ethernet in RJ45 twisted pair
Number of local bus devices that can be connected
max. 63
Immunity to ESD
Noise immunity test in accordance with EN 61000-6-2 Electrostatic discharge (ESD) EN 61000-4-2/IEC 61000-4-2 Criterion B, 6 kV contact discharge, 8 kV air discharge
ECLASS 7.0
27242608
Air pressure (storage/transport)
70 kPa ... 106 kPa (up to 3000 m above sea level)
Conductor cross section solid min.
0.2 mm²
Color
traffic grey A RAL 7042
Equipment type
Sercos slave
Supply voltage
5 V DC (via bus base module)
Type of protection
Surge protection
Overvoltage category
II (IEC 60664-1, EN 60664-1)
ECLASS 11.0
27242608
ECLASS 9.0
27242608
Note on weight specifications
with connector and bus base module
Number of supported devices
max. 63 (per station)
System-specific protocols
Sercos protocols Sercos
Power consumption
max. 13.7 W (2.0 A on UBus, UL = 24 V)
Supply voltage range
19.2 V DC ... 30 V DC (including all tolerances, including ripple)
Immunity to EF
Noise immunity test in accordance with EN 61000-6-2 Electromagnetic fields EN 61000-4-3/IEC 61000-4-3 Criterion A, Field intensity: 10 V/m
ECLASS 4.0
27240400
ECLASS 5.0
27242200
ECLASS 5.1
27242600
ETIM 3.0
EC001604
UNSPSC 7.0901
43201404
UNSPSC 18.0
32151602
UNSPSC 21.0
32151602
Power supply unit
2 A
Interference emission
Noise emission test according to EN 61000-6-3 Class B
REACh SVHC
Lead 7439-92-1
UNSPSC 19.0
32151602
Mechanical tests
Vibration resistance in acc. with EN 60068-2-6/IEC 60068-2-6 5g
Immunity to conducted interference
Noise immunity test in accordance with EN 61000-6-2 Conducted interference EN 61000-4-6/IEC 61000-4-6 Criterion A, Test voltage 10 V
UNSPSC 13.2
32151602
UNSPSC 20.0
32151602
ETIM 6.0
EC001604
Immunity to surge
Noise immunity test in accordance with EN 61000-6-2 Transient overvoltage (surge) EN 61000-4-5/IEC 61000-4-5 Criterion B, DC supply lines: ±0.5 kV/±0.5 kV (symmetrical/asymmetrical), fieldbus cable shield: ±1 kV
ECLASS 4.1
27240400
ETIM 7.0
EC001604
China RoHS
Environmentally Friendly Use Period = 50 years
UNSPSC 11
39121311

Product condition