2701546 Phoenix Contact Programmable Logic Controllers
Part#:2701546
Manufacturer:Phoenix Contact
Product Lifecycle:Active
Get a quick Quote!
About the product: Axioline E, Digital I/O device, Sercos, M12 fast connection technology, Digital inputs: 8, 24 V DC, connection method: 4-conductor, Digital outputs: 4, 24 V DC, 2 A, connection method: 3-conductor, Plastic housing, degree of protection: IP65/IP67
About the manufacturer: Phoenix Contact is one of the manufacturers that offers Programmable Logic Controllers that you can order at Quotebeam.com. Phoenix Contact manufactures industrial electrical and electronic technology products that offer power, protection, connectivity, and automation for systems and equipment.
Check out the 2701546 Phoenix Contact price in the box on the right side or send a quick quote.
2701546 Product Details
- Immunity to ESD Noise immunity test in accordance with EN 61000-6-2 Electrostatic discharge (ESD) EN 61000-4-2/IEC 61000-4-2 Criterion B, 6 kV contact discharge, 8 kV air discharge
- Width 60 mm
- Ambient temperature (storage/transport) -25 °C ... 85 °C
- Air pressure (storage/transport) 70 kPa ... 106 kPa (up to 3000 m above sea level)
- Connection method M12 connector, (A-coded)
- Number of positions 4
- Current consumption typ. 30 mA ±15 % (at 24 V DC)
- Number of inputs 8
- Input voltage range "0" signal 0 V ... 5 V DC
- Output name Digital outputs
- Switching frequency max. 5500 per second (with at least 50 mA load current)
- Output current when switched off max. 20 µA
- Note on dimensions The height is 212 mm including fixing clips.
- Air pressure (operation) 70 kPa ... 106 kPa (up to 3000 m above sea level)
- Designation Actuators (UA)
- Mounting type Wall mounting
- Device profile FSP_IO
- Supply voltage 24 V DC
- Input name Digital inputs
- Nominal input voltage UIN 24 V DC
- Nominal load, inductive 48 VA (1.2 H, 48 Ω, with nominal voltage)
- Output voltage when switched off max. 1 V
- Immunity to burst Noise immunity test in accordance with EN 61000-6-2 Fast transients (burst) EN 61000-4-4/IEC 61000-4-4 Criterion B, 2 kV
- Interference emission Noise emission test as per EN 61000-6-4 Class A
- ECLASS 11.0 27242604
- ECLASS 7.0 27242604
- ETIM 2.0 EC001433
- UNSPSC 11 39121311
- UNSPSC 21.0 32151602
- Connection technology 3-conductor
- UNSPSC 12.01 39121311
- UNSPSC 20.0 32151602
- Utilization restriction EMC: class A product, see manufacturer's declaration in the download area
- Drill hole spacing 198.5 mm
- Permissible humidity (storage/transport) 5 % ... 95 %
- Degree of protection IP65/IP67
- Equipment type Sercos slave
- Input filter time < 1000 µs
- Input voltage range "1" signal 11 V DC ... 30 V DC
- Nominal load, ohmic 48 W (48 Ω, with nominal voltage)
- Reverse voltage resistance to short pulses Reverse voltage proof
- Immunity to EF Noise immunity test in accordance with EN 61000-6-2 Electromagnetic fields EN 61000-4-3/IEC 61000-4-3 Criterion A, Field intensity: 10 V/m
- REACh SVHC Lead 7439-92-1
- ECLASS 4.1 27240400
- ETIM 4.0 EC001599
- Protocols supported HTTP
- Supply voltage range 18 V DC ... 31.2 V DC (including all tolerances, including ripple)
- Nominal input current at UIN typ. 3 mA
- Height 185 mm
- Ambient temperature (operation) -25 °C ... 60 °C
- Color anthracite
- Net weight 551.2 g
- Transmission speed 100 Mbps (with auto negotiation)
- Designation connection point Copper cable
- System-specific protocols Sercos protocols Sercos
- Output voltage 24 V DC
- Test section 24 V supply (communications power and sensor supply, digital inputs)/bus connection (Ethernet 1) 500 V AC 50 Hz 1 min.
- Immunity to surge Noise immunity test in accordance with EN 61000-6-2 Transient overvoltage (surge) EN 61000-4-5/IEC 61000-4-5 Criterion B, DC supply lines: ±0.5 kV/±0.5 kV (symmetrical/asymmetrical)
- ECLASS 10.0.1 27242604
- ECLASS 5.0 27242200
- ECLASS 9.0 27242604
- ETIM 6.0 EC001599
- UNSPSC 7.0901 43201404
- UNSPSC 19.0 32151602
- Protective circuit Overload protection, short-circuit protection of outputs yes
- Number of outputs 4
- Nominal output voltage 24 V DC (from voltage UA)
- Behavior with overload Auto restart
- Immunity to conducted interference Noise immunity test in accordance with EN 61000-6-2 Conducted interference EN 61000-4-6/IEC 61000-4-6 Criterion A, Test voltage 10 V
- ETIM 3.0 EC001599
- UNSPSC 6.01 43172015
- UNSPSC 13.2 32151602
- Depth 30.5 mm
- Permissible humidity (operation) 5 % ... 95 %
- Housing material Pocan®
- Number 2
- Note on the connection method D-coded
- Specification Sercos specification 1.1.2
- Description of the input EN 61131-2 types 1 and 3
- Cable length max. 30 m (To the sensor)
- Protection class III (IEC 61140, EN 61140, VDE 0140-1)
- ECLASS 5.1 27242600
- UNSPSC 18.0 32151602
- Mechanical tests Vibration resistance in acc. with EN 60068-2-6/IEC 60068-2-6 5g
- ECLASS 4.0 27240400
- ETIM 7.0 EC001599
- China RoHS Environmentally Friendly Use Period = 25;
- ECLASS 6.0 27242600
Product condition
New Factory Sealed
New Factory Sealed - New condition, never used surplus in original packaging with original factory seal.
1-year warranty
Get a quick Quote!
Request a quote, and we will send you price and availability within minutes.
2701546
Select Qty:
Average response time: 11 minutes
Shipping and Delivery Worldwide
calculate costs and time
Secure Payment Processing
with money back guarantee
1 year warranty
on all parts
Responsive Customer Support
we're here to help!
Need more details?
Feel free to chat with us or check our FAQ
Relevant products
Do you have questions?
We’re here for you ✨
We are a proud member of:
