2701540 Phoenix Contact Programmable Logic Controllers
Part#:2701540
Manufacturer:Phoenix Contact
Product Lifecycle:Active
Get a quick Quote!
About the product: Axioline E, Digital I/O device, Ethernet, M12 fast connection technology, Digital inputs: 8, 24 V DC, connection method: 4-conductor, Digital outputs: 4, 24 V DC, 2 A, connection method: 3-conductor, Metal housing, degree of protection: IP65/IP67
About the manufacturer: Phoenix Contact is one of the manufacturers that offers Programmable Logic Controllers that you can order at Quotebeam.com. Phoenix Contact manufactures industrial electrical and electronic technology products that offer power, protection, connectivity, and automation for systems and equipment.
Check out the 2701540 Phoenix Contact price in the box on the right side or send a quick quote.
2701540 Product Details
- Note on dimensions The height is 194.5 mm including the mounting plate. With fixing clips pulled out, the height is 212 mm. The depth is 38 mm including the mounting plate (30.5 mm without the mounting plate).
- Permissible humidity (storage/transport) 5 % ... 95 %
- Number 2
- Designation connection point Copper cable
- Protocols supported SNMP v1
- Input name Digital inputs
- Nominal input voltage UIN 24 V DC
- ECLASS 4.1 27240400
- Nominal input current at UIN typ. 3 mA
- Nominal output voltage 24 V DC (from voltage UA)
- Output voltage when switched off max. 1 V
- Immunity to ESD Noise immunity test in accordance with EN 61000-6-2 Electrostatic discharge (ESD) EN 61000-4-2/IEC 61000-4-2 Criterion B, 6 kV contact discharge, 8 kV air discharge
- Utilization restriction EMC: class A product, see manufacturer's declaration in the download area
- Drill hole spacing 198.5 mm
- Air pressure (storage/transport) 70 kPa ... 106 kPa (up to 3000 m above sea level)
- Designation Actuators (UA)
- Equipment type Modbus slave (server)
- Transmission speed 10/100 Mbps (with auto negotiation)
- Description of the input EN 61131-2 types 1 and 3
- Number of inputs 8
- Number of outputs 4
- Nominal load, ohmic 48 W (48 Ω, with nominal voltage)
- Immunity to surge Noise immunity test in accordance with EN 61000-6-2 Transient overvoltage (surge) EN 61000-4-5/IEC 61000-4-5 Criterion B, DC supply lines: ±0.5 kV/±0.5 kV (symmetrical/asymmetrical)
- Reverse voltage resistance to short pulses Reverse voltage proof
- ECLASS 10.0.1 27242604
- ECLASS 6.0 27242600
- Depth 38 mm
- Ambient temperature (storage/transport) -25 °C ... 85 °C
- Mounting type Wall mounting or DIN rail mounting; both with mounting plate.
- Connection method M12 connector, (A-coded)
- Current consumption typ. 30 mA ±15 % (at 24 V DC)
- Immunity to burst Noise immunity test in accordance with EN 61000-6-2 Fast transients (burst) EN 61000-4-4/IEC 61000-4-4 Criterion B, 2 kV
- Supply voltage range 18 V DC ... 31.2 V DC (including all tolerances, including ripple)
- Immunity to conducted interference Noise immunity test in accordance with EN 61000-6-2 Conducted interference EN 61000-4-6/IEC 61000-4-6 Criterion A, Test voltage 10 V
- Input voltage range "1" signal 11 V DC ... 30 V DC
- Output current when switched off max. 20 µA
- Height 185 mm
- Ambient temperature (operation) -25 °C ... 60 °C
- Degree of protection IP65/IP67
- Note on the connection method D-coded
- Supply voltage 24 V DC
- Protective circuit Overload protection, short-circuit protection of outputs yes
- Input voltage range "0" signal 0 V ... 5 V DC
- Output voltage 24 V DC
- Test section 24 V supply (communications power and sensor supply, digital inputs)/bus connection (Ethernet 1) 500 V AC 50 Hz 1 min.
- Protection class III (IEC 61140, EN 61140, VDE 0140-1)
- Width 60 mm
- Permissible humidity (operation) 5 % ... 95 %
- Housing material Zinc die-cast
- Net weight 719.2 g
- Specification Modbus application protocol V1.1b
- System-specific protocols Modbus protocols Modbus/TCP
- Cable length max. 30 m (To the sensor)
- Output name Digital outputs
- ETIM 3.0 EC001599
- Input filter time < 1000 µs
- Connection technology 3-conductor
- ETIM 2.0 EC001433
- ETIM 7.0 EC001599
- ETIM 4.0 EC001599
- UNSPSC 18.0 32151602
- UNSPSC 20.0 32151602
- Air pressure (operation) 70 kPa ... 106 kPa (up to 3000 m above sea level)
- Number of positions 4
- UNSPSC 7.0901 43201404
- Nominal load, inductive 48 VA (1.2 H, 48 Ω, with nominal voltage)
- ECLASS 11.0 27242604
- UNSPSC 11 39121311
- UNSPSC 21.0 32151602
- China RoHS Environmentally Friendly Use Period = 25;
- ECLASS 9.0 27242604
- UNSPSC 13.2 32151602
- Switching frequency max. 5500 per second (with at least 50 mA load current)
- ECLASS 5.1 27242600
- UNSPSC 19.0 32151602
- Behavior with overload Auto restart
- Mechanical tests Vibration resistance in acc. with EN 60068-2-6/IEC 60068-2-6 5g
- ECLASS 4.0 27240400
- UNSPSC 6.01 43172015
- Interference emission Noise emission test as per EN 61000-6-4 Class A
- ECLASS 7.0 27242604
- ETIM 6.0 EC001599
- REACh SVHC Lead 7439-92-1
- ECLASS 5.0 27242200
- UNSPSC 12.01 39121311
- Immunity to EF Noise immunity test in accordance with EN 61000-6-2 Electromagnetic fields EN 61000-4-3/IEC 61000-4-3 Criterion A, Field intensity: 10 V/m
Product condition
New Factory Sealed
New Factory Sealed - New condition, never used surplus in original packaging with original factory seal.
1-year warranty
Get a quick Quote!
Request a quote, and we will send you price and availability within minutes.
2701540
Select Qty:
Average response time: 11 minutes
Shipping and Delivery Worldwide
calculate costs and time
Secure Payment Processing
with money back guarantee
1 year warranty
on all parts
Responsive Customer Support
we're here to help!
Need more details?
Feel free to chat with us or check our FAQ
Relevant products
Do you have questions?
We’re here for you ✨
We are a proud member of:
