2701531 Phoenix Contact Programmable Logic Controllers

2701531 Product Details

• Number
  2
• Number of outputs
  max. 8
• Switching rate
  1 per second, maximum (at nominal inductive load)
• Air pressure (operation)
  70 kPa ... 106 kPa (up to 3000 m above sea level)
• Net weight
  726.9 g
• Mounting type
  Wall mounting or DIN rail mounting; both with mounting plate.
• Housing material
  Zinc die-cast
• Designation
  Actuators (UA)
• Nominal load, inductive
  3.6 VA (0.8 H, 160 Ω, at nominal load)
• Immunity to ESD
  Noise immunity test in accordance with EN 61000-6-2 Electrostatic discharge (ESD) EN 61000-4-2/IEC 61000-4-2 Criterion B, 6 kV contact discharge, 8 kV air discharge
• Immunity to burst
  Noise immunity test in accordance with EN 61000-6-2 Fast transients (burst) EN 61000-4-4/IEC 61000-4-4 Criterion B, 2 kV
• ECLASS 4.0
  27240400
• ECLASS 5.0
  27242200
• ETIM 4.0
  EC001599
• Type of addressing
  Auto-increment addressing
• Nominal output voltage
  24 V DC
• Maximum output current per device
  1.2 A
• Output current when switched off
  max. 300 µA
• Protection class
  III (IEC 61140, EN 61140, VDE 0140-1)
• ECLASS 10.0.1
  27242604
Permissible humidity (operation)
5 % ... 95 %
ECLASS 4.1
27240400
ETIM 2.0
EC001433
Connection method
M12 connector, X01 ... X04 have double occupancy
ETIM 6.0
EC001599
UNSPSC 13.2
32151602
ECLASS 7.0
27242604
ETIM 7.0
EC001599
Degree of protection
IP65/IP67
Transmission speed
100 Mbps (with auto negotiation)
Signal delay
max. 150 µs (when switched on)
Output voltage when switched off
max. 1 V
Test section
24 V supply (communications power and sensor supply, IO-Link ports)/bus connection (Ethernet 1) 500 V AC 50 Hz 1 min.
Immunity to surge
Noise immunity test in accordance with EN 61000-6-2 Transient overvoltage (surge) EN 61000-4-5/IEC 61000-4-5 Criterion B, DC supply lines: ±0.5 kV/±0.5 kV (symmetrical/asymmetrical)
China RoHS
Environmentally Friendly Use Period = 25;
Maximum output current per channel
150 mA
Nominal load, ohmic
3.6 W (160 Ω, at nominal load)
Limitation of the voltage induced on circuit interruption
-15 V DC
Immunity to EF
Noise immunity test in accordance with EN 61000-6-2 Electromagnetic fields EN 61000-4-3/IEC 61000-4-3 Criterion A, Field intensity: 10 V/m
Immunity to conducted interference
Noise immunity test in accordance with EN 61000-6-2 Conducted interference EN 61000-4-6/IEC 61000-4-6 Criterion A, Test voltage 10 V
ECLASS 11.0
27242604
ECLASS 6.0
27242600
ECLASS 9.0
27242604
UNSPSC 6.01
43172015
UNSPSC 11
39121311
UNSPSC 20.0
32151602
Mechanical tests
Vibration resistance in acc. with EN 60068-2-6/IEC 60068-2-6 5g
ETIM 3.0
EC001599
UNSPSC 12.01
39121311
Width
60 mm
Ambient temperature (storage/transport)
-25 °C ... 85 °C
Note on the connection method
D-coded
System-specific protocols
Mailbox protocols CANopen® over EtherCAT®
Specification
ETG.1000 V1.02
Depth
38 mm
Designation connection point
Copper cable
Current consumption
typ. 28 mA ±15 % (at 24 V DC)
Connection technology
3-conductor
Input frequency
0.5 kHz
Input voltage range "0" signal
-0.3 V DC ... 5 V DC
Drill hole spacing
198.5 mm
Permissible humidity (storage/transport)
5 % ... 95 %
Supply voltage
24 V DC
Protective circuit
Overload protection, short-circuit protection of sensor supply
Sensor current per channel
max. 200 mA (from L+/L-)
Output description
IO-Link ports in digital output (DO) mode
Note on dimensions
The height is 194.5 mm including the mounting plate. With fixing clips pulled out, the height is 212 mm. The depth is 38 mm including the mounting plate (30.5 mm without the mounting plate).
Air pressure (storage/transport)
70 kPa ... 106 kPa (up to 3000 m above sea level)
Nominal input current
typ. 3 mA
ECLASS 5.1
27242600
Height
185 mm
Ambient temperature (operation)
-25 °C ... 60 °C
Supply voltage range
18 V DC ... 31.2 V DC (including all tolerances, including ripple)
Type of protection
Overload protection
Interference emission
Noise emission test as per EN 61000-6-4 Class A
Nominal input voltage UIN
24 V DC
Input voltage range "1" signal
15 V DC ... 30 V DC
Behavior with overload
Shutdown with automatic restart
UNSPSC 7.0901
43201404
UNSPSC 21.0
32151602
Number of inputs
max. 8 (EN 61131-2 type 1)
Number of positions
4
Equipment type
EtherCAT® slave
Description of the input
IO-Link ports in digital input (DI) mode
Input filter time
< 1000 µs
Nominal input current at UIN
typ. 3 mA
Input name
Digital inputs at pin 2 for type A ports
UNSPSC 18.0
32151602
Total sensor current
max. 1.6 A (from L+/L-)
UNSPSC 19.0
32151602

Product condition