2701529 Phoenix Contact Programmable Logic Controllers
Part#:2701529
Manufacturer:Phoenix Contact
Product Lifecycle:Active
Get a quick Quote!
About the product: Axioline E, Digital I/O device, EtherCAT®, M12 fast connection technology, Digital inputs: 8, 24 V DC, connection method: 4-conductor, Digital outputs: 4, 24 V DC, 2 A, connection method: 3-conductor, Metal housing, degree of protection: IP65/IP67
About the manufacturer: Phoenix Contact is one of the manufacturers that offers Programmable Logic Controllers that you can order at Quotebeam.com. Phoenix Contact manufactures industrial electrical and electronic technology products that offer power, protection, connectivity, and automation for systems and equipment.
Check out the 2701529 Phoenix Contact price in the box on the right side or send a quick quote.
2701529 Product Details
- Depth 38 mm
- Ambient temperature (storage/transport) -25 °C ... 85 °C
- Air pressure (operation) 70 kPa ... 106 kPa (up to 3000 m above sea level)
- Net weight 708.6 g
- Number 2
- Number of inputs 8
- Width 60 mm
- Drill hole spacing 198.5 mm
- Degree of protection IP65/IP67
- Utilization restriction EMC: class A product, see manufacturer's declaration in the download area
- Height 185 mm
- Ambient temperature (operation) -25 °C ... 60 °C
- Permissible humidity (operation) 5 % ... 95 %
- Designation Actuators (UA)
- Designation connection point Copper cable
- Equipment type EtherCAT® slave
- Output voltage 24 V DC
- Nominal input current at UIN typ. 3 A
- Output name Digital outputs
- ECLASS 11.0 27242604
- Note on dimensions The height is 194.5 mm including the mounting plate. With fixing clips pulled out, the height is 212 mm. The depth is 38 mm including the mounting plate (30.5 mm without the mounting plate).
- Air pressure (storage/transport) 70 kPa ... 106 kPa (up to 3000 m above sea level)
- Permissible humidity (storage/transport) 5 % ... 95 %
- Mounting type Wall mounting or DIN rail mounting; both with mounting plate.
- Connection method M12 connector, (A-coded)
- Number of positions 4
- Current consumption typ. 30 mA ±15 % (at 24 V DC)
- Nominal input voltage UIN 24 V DC
- Nominal output voltage 24 V DC (from voltage UA)
- Switching frequency max. 5500 per second (with at least 50 mA load current)
- Immunity to burst Noise immunity test in accordance with EN 61000-6-2 Fast transients (burst) EN 61000-4-4/IEC 61000-4-4 Criterion B, 2 kV
- Immunity to conducted interference Noise immunity test in accordance with EN 61000-6-2 Conducted interference EN 61000-4-6/IEC 61000-4-6 Criterion A, Test voltage 10 V
- China RoHS Environmentally Friendly Use Period = 25;
- ECLASS 6.0 27242600
- ETIM 6.0 EC001599
- UNSPSC 11 39121311
- UNSPSC 19.0 32151602
- Interference emission Noise emission test as per EN 61000-6-4 Class A
- ECLASS 10.0.1 27242604
- ECLASS 5.0 27242200
- ETIM 7.0 EC001599
- Mechanical tests Vibration resistance in acc. with EN 60068-2-6/IEC 60068-2-6 5g
- ECLASS 4.1 27240400
- ECLASS 7.0 27242604
- ETIM 3.0 EC001599
- UNSPSC 6.01 43172015
- UNSPSC 12.01 39121311
- UNSPSC 20.0 32151602
- Reverse voltage resistance to short pulses Reverse voltage proof
- ECLASS 4.0 27240400
- ECLASS 5.1 27242600
- ETIM 2.0 EC001433
- Nominal load, inductive 48 VA (1.2 H, 48 Ω, with nominal voltage)
- Test section 24 V supply (communications power and sensor supply, digital inputs)/bus connection (Ethernet 1) 500 V AC 50 Hz 1 min.
- Immunity to surge Noise immunity test in accordance with EN 61000-6-2 Transient overvoltage (surge) EN 61000-4-5/IEC 61000-4-5 Criterion B, DC supply lines: ±0.5 kV/±0.5 kV (symmetrical/asymmetrical)
- System-specific protocols Mailbox protocols CANopen® over EtherCAT®
- Specification ETG.1000 V1.02
- Number of outputs 4
- Output voltage when switched off max. 1 V
- REACh SVHC Lead 7439-92-1
- ECLASS 9.0 27242604
- Output current when switched off max. 20 µA
- UNSPSC 18.0 32151602
- Note on the connection method D-coded
- Type of addressing Auto-increment addressing
- Input name Digital inputs
- Protective circuit Overload protection, short-circuit protection of outputs yes
- Input voltage range "0" signal 0 V ... 5 V DC
- Nominal load, ohmic 48 W (48 Ω, with nominal voltage)
- Protection class III (IEC 61140, EN 61140, VDE 0140-1)
- ETIM 4.0 EC001599
- Housing material Zinc die-cast
- Supply voltage 24 V DC
- Input voltage range "1" signal 11 V DC ... 30 V DC
- UNSPSC 7.0901 43201404
- UNSPSC 21.0 32151602
- Input filter time < 1000 µs
- Transmission speed 100 Mbps (with auto negotiation)
- Supply voltage range 18 V DC ... 31.2 V DC (including all tolerances, including ripple)
- Description of the input EN 61131-2 types 1 and 3
- Connection technology 3-conductor
- Behavior with overload Auto restart
- Immunity to ESD Noise immunity test in accordance with EN 61000-6-2 Electrostatic discharge (ESD) EN 61000-4-2/IEC 61000-4-2 Criterion B, 6 kV contact discharge, 8 kV air discharge
- Immunity to EF Noise immunity test in accordance with EN 61000-6-2 Electromagnetic fields EN 61000-4-3/IEC 61000-4-3 Criterion A, Field intensity: 10 V/m
- UNSPSC 13.2 32151602
Product condition
New Factory Sealed
New Factory Sealed - New condition, never used surplus in original packaging with original factory seal.
1-year warranty
Get a quick Quote!
Request a quote, and we will send you price and availability within minutes.
2701529
Select Qty:
Average response time: 11 minutes
Shipping and Delivery Worldwide
calculate costs and time
Secure Payment Processing
with money back guarantee
1 year warranty
on all parts
Responsive Customer Support
we're here to help!
Need more details?
Feel free to chat with us or check our FAQ
Relevant products
Do you have questions?
We’re here for you ✨