2701519 Phoenix Contact Programmable Logic Controllers

2701519 Product Details

• Supply voltage
  24 V DC
• Ambient temperature (operation)
  -25 °C ... 60 °C
• Air pressure (operation)
  70 kPa ... 106 kPa (up to 3000 m above sea level)
• Mounting type
  Wall mounting or DIN rail mounting; both with mounting plate.
• Net weight
  728.9 g
• Note on the connection method
  D-coded
• System-specific protocols
  PROFINET protocols LLDP
• Supply voltage range
  18 V DC ... 31.2 V DC (including all tolerances, including ripple)
• Description of the input
  IO-Link ports in digital input (DI) mode
• Width
  60 mm
• Permissible humidity (storage/transport)
  5 % ... 95 %
• Degree of protection
  IP65/IP67
• Connection method
  M12 connector, X01 ... X04 have double occupancy
• Number of positions
  4
• Protocols supported
  SNMP v1
• Input name
  Digital inputs at pin 2 for type A ports
• Nominal input voltage UIN
  24 V DC
• Input frequency
  0.5 kHz
• Depth
  38 mm
• Ambient temperature (storage/transport)
  -25 °C ... 85 °C
Air pressure (storage/transport)
70 kPa ... 106 kPa (up to 3000 m above sea level)
Designation
Actuators (UA)
Transmission speed
100 Mbps (with auto negotiation)
Conformance class
B
Protective circuit
Overload protection, short-circuit protection of sensor supply
Input filter time
< 1000 µs
Nominal input current at UIN
typ. 3 mA
Sensor current per channel
max. 200 mA (from L+/L-)
Number of outputs
max. 8
REACh SVHC
Lead 7439-92-1
Height
185 mm
Drill hole spacing
198.5 mm
Input voltage range "0" signal
-0.3 V DC ... 5 V DC
Permissible humidity (operation)
5 % ... 95 %
Number
2
Equipment type
PROFINET-Device
Number of supported application relationships (AR)
2
Nominal input current
typ. 3 mA
Current consumption
typ. 28 mA ±15 % (at 24 V DC)
Number of inputs
max. 8 (EN 61131-2 type 1)
Output description
IO-Link ports in digital output (DO) mode
Utilization restriction
EMC: class A product, see manufacturer's declaration in the download area
Nominal output voltage
24 V DC
Note on dimensions
The height is 194.5 mm including the mounting plate. With fixing clips pulled out, the height is 212 mm. The depth is 38 mm including the mounting plate (30.5 mm without the mounting plate).
Housing material
Zinc die-cast
Designation connection point
Copper cable
Signal delay
max. 150 µs (when switched on)
Behavior with overload
Shutdown with automatic restart
Immunity to burst
Noise immunity test in accordance with EN 61000-6-2 Fast transients (burst) EN 61000-4-4/IEC 61000-4-4 Criterion B, 2 kV
Nominal load, ohmic
3.6 W (160 Ω, at nominal load)
ECLASS 11.0
27242604
ETIM 2.0
EC001433
ECLASS 9.0
27242604
ECLASS 5.0
27242200
UNSPSC 18.0
32151602
UNSPSC 13.2
32151602
ETIM 4.0
EC001599
UNSPSC 6.01
43172015
Connection technology
3-conductor
Total sensor current
max. 1.6 A (from L+/L-)
Limitation of the voltage induced on circuit interruption
-15 V DC
Immunity to ESD
Noise immunity test in accordance with EN 61000-6-2 Electrostatic discharge (ESD) EN 61000-4-2/IEC 61000-4-2 Criterion B, 6 kV contact discharge, 8 kV air discharge
Immunity to conducted interference
Noise immunity test in accordance with EN 61000-6-2 Conducted interference EN 61000-4-6/IEC 61000-4-6 Criterion A, Test voltage 10 V
ETIM 7.0
EC001599
UNSPSC 12.01
39121311
Type of protection
Overload protection
Output voltage when switched off
max. 1 V
Switching rate
1 per second, maximum (at nominal inductive load)
Test section
24 V supply (communications power and sensor supply, IO-Link ports)/bus connection (Ethernet 1) 500 V AC 50 Hz 1 min.
Interference emission
Noise emission test as per EN 61000-6-4 Class A
Protection class
III (IEC 61140, EN 61140, VDE 0140-1)
UNSPSC 11
39121311
UNSPSC 21.0
32151602
Input voltage range "1" signal
15 V DC ... 30 V DC
Output current when switched off
max. 300 µA
Immunity to EF
Noise immunity test in accordance with EN 61000-6-2 Electromagnetic fields EN 61000-4-3/IEC 61000-4-3 Criterion A, Field intensity: 10 V/m
ECLASS 10.0.1
27242604
China RoHS
Environmentally Friendly Use Period = 25;
ECLASS 7.0
27242604
ETIM 6.0
EC001599
Maximum output current per channel
150 mA
Maximum output current per device
1.2 A
Nominal load, inductive
3.6 VA (0.8 H, 160 Ω, at nominal load)
Immunity to surge
Noise immunity test in accordance with EN 61000-6-2 Transient overvoltage (surge) EN 61000-4-5/IEC 61000-4-5 Criterion B, DC supply lines: ±0.5 kV/±0.5 kV (symmetrical/asymmetrical)
ECLASS 4.0
27240400
UNSPSC 7.0901
43201404
Mechanical tests
Vibration resistance in acc. with EN 60068-2-6/IEC 60068-2-6 5g
UNSPSC 19.0
32151602
ECLASS 4.1
27240400
UNSPSC 20.0
32151602
ECLASS 5.1
27242600
ECLASS 6.0
27242600
ETIM 3.0
EC001599

Product condition