2701503 Phoenix Contact Programmable Logic Controllers

2701503 Product Details

• Note on dimensions
  The height is 212 mm including fixing clips.
• Ambient temperature (operation)
  -25 °C ... 60 °C
• Air pressure (storage/transport)
  70 kPa ... 106 kPa (up to 3000 m above sea level)
• Note on the connection method
  B-coded
• Transmission physics
  PROFIBUS-DP-compliant copper cable
• Supply voltage
  24 V DC
• Type of protection
  Overload protection
• Connection technology
  3-conductor
• Protective circuit
  Overload protection, short-circuit protection of sensor supply
• Address area assignment
  1 ... 126, adjustable
• Current consumption
  typ. 30 mA ±15 % (at 24 V DC)
• Input name
  Digital inputs at pin 2 for type A ports
• Input voltage range "0" signal
  -0.3 V DC ... 5 V DC
• Sensor current per channel
  max. 200 mA (from L+/L-)
• Output voltage when switched off
  max. 1 V
• Depth
  30.5 mm
• Ambient temperature (storage/transport)
  -25 °C ... 85 °C
• Housing material
  Pocan®
• Number
  2
• Designation connection point
  Copper cable
Number of inputs
max. 8 (EN 61131-2 type 1)
Input filter time
< 1000 µs
Number of ports
4
Nominal load, inductive
3.6 VA (0.8 H, 160 Ω, at nominal load)
Height
185 mm
Permissible humidity (operation)
5 % ... 95 %
Number of positions
4
Equipment type
PROFIBUS slave
Nominal current for every IO-Link port
max. 150 mA (at C/Q (pin 4), maximum of 1.6 A over all 8 IO-Link C/Q and L+ cables)
Utilization restriction
EMC: class A product, see manufacturer's declaration in the download area
Air pressure (operation)
70 kPa ... 106 kPa (up to 3000 m above sea level)
Mounting type
Wall mounting
Net weight
552 g
Designation
IO-Link
System-specific protocols
PROFIBUS protocols DP V1
Nominal voltage for I/O supply
24 V DC
Nominal input voltage UIN
24 V DC
Input voltage range "1" signal
15 V DC ... 30 V DC
Input frequency
0.5 kHz
Maximum output current per device
1.2 A
Nominal output voltage
24 V DC
Signal delay
max. 150 µs (when switched on)
Immunity to ESD
Noise immunity test in accordance with EN 61000-6-2 Electrostatic discharge (ESD) EN 61000-4-2/IEC 61000-4-2 Criterion B, 6 kV contact discharge, 8 kV air discharge
China RoHS
Environmentally Friendly Use Period = 25;
Description of the input
IO-Link ports in digital input (DI) mode
Nominal input current at UIN
typ. 3 mA
Nominal input current
typ. 3 mA
Cycle Time
min. 2 ms (MasterCycleTime: PDInput* + PDOutput* + OnReqData* < = 17 Bytes, COM3; * see "IO-Link Interface and System Specification V1.1.2")
Nominal load, ohmic
3.6 W (160 Ω, at nominal load)
Limitation of the voltage induced on circuit interruption
-15 V DC
Test section
24 V supply (communications power and sensor supply, IO-Link ports)/bus connection 500 V AC 50 Hz 1 min.
Immunity to conducted interference
Noise immunity test in accordance with EN 61000-6-2 Conducted interference EN 61000-4-6/IEC 61000-4-6 Criterion A, Test voltage 10 V
Width
60 mm
Drill hole spacing
198.5 mm
Color
anthracite
Connection method
M12 connector, X01 ... X04 have double occupancy
Transmission speed
9.6 kbps ... 12 Mbps (Automatic baud rate detection)
Supply voltage range
18 V DC ... 31.2 V DC (including all tolerances, including ripple)
Permissible cable length
< 20 m
Total sensor current
max. 1.6 A (from L+/L-)
Port type
Class A
Number of outputs
max. 8
Output current when switched off
max. 300 µA
Immunity to surge
Noise immunity test in accordance with EN 61000-6-2 Transient overvoltage (surge) EN 61000-4-5/IEC 61000-4-5 Criterion B, DC supply lines: ±0.5 kV/±0.5 kV (symmetrical/asymmetrical)
Interference emission
Noise emission test as per EN 61000-6-4 Class A
ECLASS 4.1
27240400
ECLASS 5.1
27242600
ETIM 2.0
EC001433
UNSPSC 7.0901
43201404
Switching rate
1 per second, maximum (at nominal inductive load)
Behavior with overload
Shutdown with automatic restart
Immunity to burst
Noise immunity test in accordance with EN 61000-6-2 Fast transients (burst) EN 61000-4-4/IEC 61000-4-4 Criterion B, 2 kV
Mechanical tests
Vibration resistance in acc. with EN 60068-2-6/IEC 60068-2-6 5g
Protection class
III (IEC 61140, EN 61140, VDE 0140-1)
Immunity to EF
Noise immunity test in accordance with EN 61000-6-2 Electromagnetic fields EN 61000-4-3/IEC 61000-4-3 Criterion A, Field intensity: 10 V/m
ECLASS 10.0.1
27242604
ECLASS 5.0
27242200
ECLASS 11.0
27242604
ETIM 7.0
EC001599
UNSPSC 18.0
32151602
REACh SVHC
Lead 7439-92-1
ETIM 6.0
EC001599
ECLASS 4.0
27240400
ETIM 3.0
EC001599
Maximum output current per channel
150 mA
UNSPSC 6.01
43172015
Degree of protection
IP65/IP67
Output description
IO-Link ports in digital output (DO) mode
ECLASS 7.0
27242604
ETIM 4.0
EC001599
UNSPSC 19.0
32151602
ECLASS 9.0
27242604
UNSPSC 11
39121311
UNSPSC 12.01
39121311
UNSPSC 21.0
32151602
UNSPSC 13.2
32151602
Permissible humidity (storage/transport)
5 % ... 95 %
UNSPSC 20.0
32151602
ECLASS 6.0
27242600

Product condition