2701494 Phoenix Contact Programmable Logic Controllers
Part#:2701494
Manufacturer:Phoenix Contact
Product Lifecycle:Active
In-stock parts: 17
Apr 24, 2024
About the product: Axioline E, Digital I/O device, EtherNet/IP™, M12 fast connection technology, Digital inputs: 16, 24 V DC, connection method: 4-conductor, Digital outputs: 16, 24 V DC, 500 mA, connection method: 3-conductor, Plastic housing, degree of protection: IP65/IP
About the manufacturer: Phoenix Contact is one of the manufacturers that offers Programmable Logic Controllers that you can order at Quotebeam.com. Phoenix Contact manufactures industrial electrical and electronic technology products that offer power, protection, connectivity, and automation for systems and equipment.
Check out the 2701494 Phoenix Contact price in the box on the right side or send a quick quote.
2701494 Product Details
- Height 185 mm
- Permissible humidity (operation) 5 % ... 95 %
- Net weight 549.8 g
- Width 60 mm
- Ambient temperature (operation) -25 °C ... 60 °C
- Designation Actuators (UA) for additional devices
- System-specific protocols EtherNet/IP™ protocols ACD
- Supply voltage range 18 V DC ... 31.2 V DC (including all tolerances, including ripple)
- Number of inputs 16
- Cable length max. 30 m (To the sensor)
- Input voltage range "0" signal 0 V ... 5 V DC
- Nominal load, inductive 12 VA (1.2 H, 48 Ω, with nominal voltage)
- Behavior with overload Auto restart
- Immunity to surge Noise immunity test in accordance with EN 61000-6-2 Transient overvoltage (surge) EN 61000-4-5/IEC 61000-4-5 Criterion B, DC supply lines: ±0.5 kV/±0.5 kV (symmetrical/asymmetrical)
- Housing material Pocan®
- UNSPSC 7.0901 43201404
- Connection method M12 connector, double occupancy
- Nominal output voltage 24 V DC (from voltage US)
- Output current when switched off max. 20 µA
- Test section 24 V supply (communications power/sensor supply, digital inputs/outputs)/bus connection (Ethernet 1) 500 V AC 50 Hz 1 min.
- Immunity to conducted interference Noise immunity test in accordance with EN 61000-6-2 Conducted interference EN 61000-4-6/IEC 61000-4-6 Criterion A, Test voltage 10 V
- Mechanical tests Vibration resistance in acc. with EN 60068-2-6/IEC 60068-2-6 5g
- ECLASS 10.0.1 27242604
- ECLASS 6.0 27242600
- Depth 30.5 mm
- Ambient temperature (storage/transport) -25 °C ... 85 °C
- Permissible humidity (storage/transport) 5 % ... 95 %
- Degree of protection IP65/IP67
- Output voltage when switched off max. 1 V
- Immunity to burst Noise immunity test in accordance with EN 61000-6-2 Fast transients (burst) EN 61000-4-4/IEC 61000-4-4 Criterion B, 2 kV
- Utilization restriction EMC: class A product, see manufacturer's declaration in the download area
- Drill hole spacing 198.5 mm
- Air pressure (storage/transport) 70 kPa ... 106 kPa (up to 3000 m above sea level)
- Mounting type Wall mounting
- Designation connection point Copper cable
- Number of positions 4
- Protocols supported SNMP v1
- Input name Digital inputs
- Connection technology 3-conductor
- Nominal input current at UIN typ. 3 mA
- Number of outputs 16
- Note on dimensions The height is 212 mm including fixing clips.
- Air pressure (operation) 70 kPa ... 106 kPa (up to 3000 m above sea level)
- Color anthracite
- Note on the connection method D-coded
- Transmission speed 10/100 Mbps (with auto negotiation)
- Current consumption typ. 3 mA ±15 % (at 24 V DC)
- Supply voltage 24 V DC
- Protective circuit Overload protection, short-circuit protection of outputs yes
- Input voltage range "1" signal 11 V DC ... 30 V DC
- Output voltage 24 V DC
- Number 2
- Equipment type EtherNet/IP™ slave
- Specification CIP Edition 3.11EIP adaptation of CIP 1.12
- Nominal load, ohmic 12 W (48 Ω, with nominal voltage)
- Description of the input EN 61131-2 types 1 and 3
- Nominal input voltage UIN 24 V DC
- Input filter time < 1000 µs
- Output name Digital outputs
- ECLASS 5.1 27242600
- ETIM 7.0 EC001599
- UNSPSC 6.01 43172015
- UNSPSC 12.01 39121311
- REACh SVHC Lead 7439-92-1
- ECLASS 5.0 27242200
- Immunity to ESD Noise immunity test in accordance with EN 61000-6-2 Electrostatic discharge (ESD) EN 61000-4-2/IEC 61000-4-2 Criterion B, 6 kV contact discharge, 8 kV air discharge
- ECLASS 7.0 27242604
- Protection class III (IEC 61140, EN 61140, VDE 0140-1)
- ECLASS 11.0 27242604
- UNSPSC 11 39121311
- ECLASS 9.0 27242604
- ETIM 6.0 EC001599
- Immunity to EF Noise immunity test in accordance with EN 61000-6-2 Electromagnetic fields EN 61000-4-3/IEC 61000-4-3 Criterion A, Field intensity: 10 V/m
- Switching frequency max. 5500 per second (with at least 50 mA load current)
- ETIM 4.0 EC001599
- UNSPSC 13.2 32151602
- Reverse voltage resistance to short pulses Reverse voltage proof
- Interference emission Noise emission test as per EN 61000-6-4 Class A
- UNSPSC 18.0 32151602
- ECLASS 4.0 27240400
- ETIM 2.0 EC001433
- ETIM 3.0 EC001599
- UNSPSC 21.0 32151602
- China RoHS Environmentally Friendly Use Period = 25;
- ECLASS 4.1 27240400
- UNSPSC 20.0 32151602
- UNSPSC 19.0 32151602
Product condition
New Factory Sealed
New Factory Sealed - New condition, never used surplus in original packaging with original factory seal.
This item can ship within 24h!
1-year warranty
$585.59
2701494
Stock:
17
Select Qty:
$585.59
$585.59 each
Shipping and Delivery Worldwide
calculate costs and time
Secure Payment Processing
with money back guarantee
1 year warranty
on all parts
Responsive Customer Support
we're here to help!
Need more details?
Feel free to chat with us or check our FAQ
Relevant products
Do you have questions?
We’re here for you ✨
We are a proud member of:
