2701493 Phoenix Contact Programmable Logic Controllers

2701493 Product Details

• Width
  60 mm
• Permissible humidity (operation)
  5 % ... 95 %
• Housing material
  Pocan®
• Note on the connection method
  D-coded
• Protocols supported
  SNMP v1
• Current consumption
  typ. 3 mA ±15 % (at 24 V DC)
• Depth
  30.5 mm
• Air pressure (operation)
  70 kPa ... 106 kPa (up to 3000 m above sea level)
• Degree of protection
  IP65/IP67
• Connection method
  M12 connector, double occupancy
• ECLASS 11.0
  27242604
• Height
  185 mm
• Ambient temperature (operation)
  -25 °C ... 60 °C
• Permissible humidity (storage/transport)
  5 % ... 95 %
• Mounting type
  Wall mounting
• Transmission speed
  10/100 Mbps (with auto negotiation)
• Equipment type
  EtherNet/IP™ slave
• Supply voltage
  24 V DC
• Protective circuit
  Overload protection, short-circuit protection of sensor supply
• Input voltage range "1" signal
  11 V DC ... 30 V DC
Immunity to EF
Noise immunity test in accordance with EN 61000-6-2 Electromagnetic fields EN 61000-4-3/IEC 61000-4-3 Criterion A, Field intensity: 10 V/m
Note on dimensions
The height is 212 mm including fixing clips.
Air pressure (storage/transport)
70 kPa ... 106 kPa (up to 3000 m above sea level)
Color
anthracite
Net weight
547 g
Designation connection point
Copper cable
Input name
Digital inputs
Nominal input current at UIN
typ. 3 mA
Cable length
max. 30 m (To the sensor)
Interference emission
Noise emission test as per EN 61000-6-4 Class A
UNSPSC 19.0
32151602
Designation
Actuators (UA) for additional devices
Utilization restriction
EMC: class A product, see manufacturer's declaration in the download area
Drill hole spacing
198.5 mm
Ambient temperature (storage/transport)
-25 °C ... 85 °C
Number
2
System-specific protocols
EtherNet/IP™ protocols ACD
Supply voltage range
18 V DC ... 31.2 V DC (including all tolerances, including ripple)
Description of the input
EN 61131-2 types 1 and 3
Input filter time
< 1000 µs
Immunity to burst
Noise immunity test in accordance with EN 61000-6-2 Fast transients (burst) EN 61000-4-4/IEC 61000-4-4 Criterion B, 2 kV
Immunity to ESD
Noise immunity test in accordance with EN 61000-6-2 Electrostatic discharge (ESD) EN 61000-4-2/IEC 61000-4-2 Criterion B, 6 kV contact discharge, 8 kV air discharge
UNSPSC 18.0
32151602
REACh SVHC
Lead 7439-92-1
Number of positions
4
Specification
CIP Edition 3.11EIP adaptation of CIP 1.12
Number of inputs
16
Nominal input voltage UIN
24 V DC
Test section
24 V supply (communications power and sensor supply, digital inputs)/bus connection (Ethernet 1) 500 V AC 50 Hz 1 min.
Connection technology
4-conductor
Input voltage range "0" signal
0 V ... 5 V DC
Immunity to conducted interference
Noise immunity test in accordance with EN 61000-6-2 Conducted interference EN 61000-4-6/IEC 61000-4-6 Criterion A, Test voltage 10 V
Protection class
III (IEC 61140, EN 61140, VDE 0140-1)
UNSPSC 20.0
32151602
UNSPSC 13.2
32151602
UNSPSC 21.0
32151602
ETIM 7.0
EC001599
ETIM 4.0
EC001599
ECLASS 6.0
27242600
ECLASS 4.0
27240400
ECLASS 7.0
27242604
ETIM 2.0
EC001433
ETIM 6.0
EC001599
UNSPSC 11
39121311
ECLASS 10.0.1
27242604
Immunity to surge
Noise immunity test in accordance with EN 61000-6-2 Transient overvoltage (surge) EN 61000-4-5/IEC 61000-4-5 Criterion B, DC supply lines: ±0.5 kV/±0.5 kV (symmetrical/asymmetrical)
UNSPSC 7.0901
43201404
ECLASS 4.1
27240400
ECLASS 5.0
27242200
China RoHS
Environmentally Friendly Use Period = 25;
ECLASS 9.0
27242604
ECLASS 5.1
27242600
ETIM 3.0
EC001599
UNSPSC 12.01
39121311
Mechanical tests
Vibration resistance in acc. with EN 60068-2-6/IEC 60068-2-6 5g
UNSPSC 6.01
43172015

Product condition